# This is a boot script for U-Boot
# Generate boot.scr:
# mkimage -c none -A arm -T script -d boot.cmd.default boot.scr
#
################
## Please change the kernel_offset and kernel_size if the kernel image size more than
## the 100MB and BOOT.BIN size more than the 30MB
## kernel_offset --> is the address of qspi which you want load the kernel image
## kernel_size --> size of the kernel image in hex
###############
fdt_addr=0x1000
imageub_addr=0x10000000
kernel_addr=0x80000
kernel_offset=0x1E00200
kernel_size=0x7800000
kernel_type=image.ub

for boot_target in ${boot_targets};
do
	if test "${boot_target}" = "jtag" ; then
		booti ${kernel_addr} - ${fdt_addr};
		exit;
	fi
	if test "${boot_target}" = "mmc0" || test "${boot_target}" = "mmc1" ; then
		if test -e ${devtype} ${devnum}:${distro_bootpart} /image.ub; then
			fatload ${devtype} ${devnum}:${distro_bootpart} ${imageub_addr} image.ub;
			bootm ${imageub_addr};
			exit;
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /Image; then
			fatload ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr} Image;
			booti ${kernel_addr} - ${fdt_addr};
			exit;
		fi
		booti ${kernel_addr} - ${fdt_addr};
		exit;
	fi
	if test "${boot_target}" = "xspi0"; then
		sf probe 0 0 0;
		if test "${kernel_type}" = "image.ub"; then
			sf read ${imageub_addr} ${kernel_offset} ${kernel_size};
			bootm ${imageub_addr};
			exit;
		fi
		if test "${kernel_type}" = "Image"; then
			sf read ${kernel_addr} ${kernel_offset} ${kernel_size};
			booti ${kernel_addr} - ${fdt_addr};
			exit;
		fi
		exit;
	fi
done