# This is a boot script for U-Boot
# Generate boot.scr:
# mkimage -c none -A arm -T script -d boot.cmd.default boot.scr
#
################
@@PRE_BOOTENV@@

for boot_target in ${boot_targets};
do
	if test "${boot_target}" = "jtag" ; then
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
		exit;
	fi
	if test "${boot_target}" = "mmc0" || test "${boot_target}" = "mmc1" ; then
		if test -e ${devtype} ${devnum}:${distro_bootpart} /@@FIT_IMAGE@@; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@FIT_IMAGE_LOAD_ADDRESS@@ @@FIT_IMAGE@@;
			bootm @@FIT_IMAGE_LOAD_ADDRESS@@;
			exit;
                fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /@@KERNEL_IMAGE@@; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGE@@;;
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /system.dtb; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@DEVICETREE_ADDRESS@@ system.dtb;
		fi
		if test -e ${devtype} ${devnum}:${distro_bootpart} /@@RAMDISK_IMAGE@@; then
			fatload ${devtype} ${devnum}:${distro_bootpart} @@RAMDISK_IMAGE_ADDRESS@@ @@RAMDISK_IMAGE@@;
			@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
			exit;
		fi
		@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@
		exit;
	fi
	if test "${boot_target}" = "xspi0" || test "${boot_target}" = "qspi" || test "${boot_target}" = "qspi0"; then
		sf probe 0 0 0;
		if test "@@QSPI_KERNEL_IMAGE@@" = "@@FIT_IMAGE@@"; then
			sf read @@QSPI_FIT_IMAGE_LOAD_ADDRESS@@ @@QSPI_KERNEL_OFFSET@@ @@QSPI_FIT_IMAGE_SIZE@@;
			bootm @@QSPI_FIT_IMAGE_LOAD_ADDRESS@@;
			exit;
		fi
		if test "@@QSPI_KERNEL_IMAGE@@" = "@@KERNEL_IMAGE@@"; then
			sf read @@KERNEL_LOAD_ADDRESS@@ @@QSPI_KERNEL_OFFSET@@ @@QSPI_KERNEL_SIZE@@;
			sf read @@RAMDISK_IMAGE_ADDRESS@@ @@QSPI_RAMDISK_OFFSET@@ @@QSPI_RAMDISK_SIZE@@
			@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
			exit;
		fi
		exit;
	fi
	if test "${boot_target}" = "nand" || test "${boot_target}" = "nand0"; then
		nand info
		if test "@@NAND_KERNEL_IMAGE@@" = "@@FIT_IMAGE@@"; then
			nand read @@NAND_FIT_IMAGE_LOAD_ADDRESS@@ @@NAND_KERNEL_OFFSET@@ @@NAND_FIT_IMAGE_SIZE@@;
			bootm @@NAND_FIT_IMAGE_LOAD_ADDRESS@@;
			exit;
		fi
		if test "@@NAND_KERNEL_IMAGE@@" = "@@KERNEL_IMAGE@@"; then
			nand read @@KERNEL_LOAD_ADDRESS@@ @@NAND_KERNEL_OFFSET@@ @@NAND_KERNEL_SIZE@@;
			nand read @@RAMDISK_IMAGE_ADDRESS@@ @@NAND_RAMDISK_OFFSET@@  @@NAND_RAMDISK_SIZE@@;
			@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
			exit;
		fi
	fi
done