ZCU106_10Gbps_ethernet/Petalinux/project-spec/meta-user/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.default.initrd

64 lines
2.6 KiB
Plaintext

# This is a boot script for U-Boot
# Generate boot.scr:
# mkimage -c none -A arm -T script -d boot.cmd.default boot.scr
#
################
@@PRE_BOOTENV@@
for boot_target in ${boot_targets};
do
if test "${boot_target}" = "jtag" ; then
@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
exit;
fi
if test "${boot_target}" = "mmc0" || test "${boot_target}" = "mmc1" ; then
if test -e ${devtype} ${devnum}:${distro_bootpart} /@@FIT_IMAGE@@; then
fatload ${devtype} ${devnum}:${distro_bootpart} @@FIT_IMAGE_LOAD_ADDRESS@@ @@FIT_IMAGE@@;
bootm @@FIT_IMAGE_LOAD_ADDRESS@@;
exit;
fi
if test -e ${devtype} ${devnum}:${distro_bootpart} /@@KERNEL_IMAGE@@; then
fatload ${devtype} ${devnum}:${distro_bootpart} @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGE@@;;
fi
if test -e ${devtype} ${devnum}:${distro_bootpart} /system.dtb; then
fatload ${devtype} ${devnum}:${distro_bootpart} @@DEVICETREE_ADDRESS@@ system.dtb;
fi
if test -e ${devtype} ${devnum}:${distro_bootpart} /@@RAMDISK_IMAGE@@; then
fatload ${devtype} ${devnum}:${distro_bootpart} @@RAMDISK_IMAGE_ADDRESS@@ @@RAMDISK_IMAGE@@;
@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
exit;
fi
@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@
exit;
fi
if test "${boot_target}" = "xspi0" || test "${boot_target}" = "qspi" || test "${boot_target}" = "qspi0"; then
sf probe 0 0 0;
if test "@@QSPI_KERNEL_IMAGE@@" = "@@FIT_IMAGE@@"; then
sf read @@QSPI_FIT_IMAGE_LOAD_ADDRESS@@ @@QSPI_KERNEL_OFFSET@@ @@QSPI_FIT_IMAGE_SIZE@@;
bootm @@QSPI_FIT_IMAGE_LOAD_ADDRESS@@;
exit;
fi
if test "@@QSPI_KERNEL_IMAGE@@" = "@@KERNEL_IMAGE@@"; then
sf read @@KERNEL_LOAD_ADDRESS@@ @@QSPI_KERNEL_OFFSET@@ @@QSPI_KERNEL_SIZE@@;
sf read @@RAMDISK_IMAGE_ADDRESS@@ @@QSPI_RAMDISK_OFFSET@@ @@QSPI_RAMDISK_SIZE@@
@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
exit;
fi
exit;
fi
if test "${boot_target}" = "nand" || test "${boot_target}" = "nand0"; then
nand info
if test "@@NAND_KERNEL_IMAGE@@" = "@@FIT_IMAGE@@"; then
nand read @@NAND_FIT_IMAGE_LOAD_ADDRESS@@ @@NAND_KERNEL_OFFSET@@ @@NAND_FIT_IMAGE_SIZE@@;
bootm @@NAND_FIT_IMAGE_LOAD_ADDRESS@@;
exit;
fi
if test "@@NAND_KERNEL_IMAGE@@" = "@@KERNEL_IMAGE@@"; then
nand read @@KERNEL_LOAD_ADDRESS@@ @@NAND_KERNEL_OFFSET@@ @@NAND_KERNEL_SIZE@@;
nand read @@RAMDISK_IMAGE_ADDRESS@@ @@NAND_RAMDISK_OFFSET@@ @@NAND_RAMDISK_SIZE@@;
@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
exit;
fi
fi
done