neorv32/rtl/test_setups/neorv32_test_setup_bootload...

105 lines
6.4 KiB
VHDL
Raw Permalink Normal View History

2024-02-24 08:25:27 +00:00
-- #################################################################################################
-- # << NEORV32 - Test Setup using the default UART-Bootloader to upload and run executables >> #
-- # ********************************************************************************************* #
-- # BSD 3-Clause License #
-- # #
-- # Copyright (c) 2023, Stephan Nolting. All rights reserved. #
-- # #
-- # Redistribution and use in source and binary forms, with or without modification, are #
-- # permitted provided that the following conditions are met: #
-- # #
-- # 1. Redistributions of source code must retain the above copyright notice, this list of #
-- # conditions and the following disclaimer. #
-- # #
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
-- # conditions and the following disclaimer in the documentation and/or other materials #
-- # provided with the distribution. #
-- # #
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
-- # endorse or promote products derived from this software without specific prior written #
-- # permission. #
-- # #
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
-- # OF THE POSSIBILITY OF SUCH DAMAGE. #
-- # ********************************************************************************************* #
-- # The NEORV32 RISC-V Processor - https://github.com/stnolting/neorv32 #
-- #################################################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library neorv32;
use neorv32.neorv32_package.all;
entity neorv32_test_setup_bootloader is
generic (
-- adapt these for your setup --
CLOCK_FREQUENCY : natural := 100000000; -- clock frequency of clk_i in Hz
MEM_INT_IMEM_SIZE : natural := 16*1024; -- size of processor-internal instruction memory in bytes
MEM_INT_DMEM_SIZE : natural := 8*1024 -- size of processor-internal data memory in bytes
);
port (
-- Global control --
clk_i : in std_ulogic; -- global clock, rising edge
rstn_i : in std_ulogic; -- global reset, low-active, async
-- GPIO --
gpio_o : out std_ulogic_vector(7 downto 0); -- parallel output
-- UART0 --
uart0_txd_o : out std_ulogic; -- UART0 send data
uart0_rxd_i : in std_ulogic -- UART0 receive data
);
end entity;
architecture neorv32_test_setup_bootloader_rtl of neorv32_test_setup_bootloader is
signal con_gpio_o : std_ulogic_vector(63 downto 0);
begin
-- The Core Of The Problem ----------------------------------------------------------------
-- -------------------------------------------------------------------------------------------
neorv32_top_inst: neorv32_top
generic map (
-- General --
CLOCK_FREQUENCY => CLOCK_FREQUENCY, -- clock frequency of clk_i in Hz
INT_BOOTLOADER_EN => true, -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
-- RISC-V CPU Extensions --
CPU_EXTENSION_RISCV_C => true, -- implement compressed extension?
CPU_EXTENSION_RISCV_M => true, -- implement mul/div extension?
CPU_EXTENSION_RISCV_Zicntr => true, -- implement base counters?
-- Internal Instruction memory --
MEM_INT_IMEM_EN => true, -- implement processor-internal instruction memory
MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
-- Internal Data memory --
MEM_INT_DMEM_EN => true, -- implement processor-internal data memory
MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
-- Processor peripherals --
IO_GPIO_NUM => 8, -- number of GPIO input/output pairs (0..64)
IO_MTIME_EN => true, -- implement machine system timer (MTIME)?
IO_UART0_EN => true -- implement primary universal asynchronous receiver/transmitter (UART0)?
)
port map (
-- Global control --
clk_i => clk_i, -- global clock, rising edge
rstn_i => rstn_i, -- global reset, low-active, async
-- GPIO (available if IO_GPIO_EN = true) --
gpio_o => con_gpio_o, -- parallel output
-- primary UART0 (available if IO_GPIO_NUM > 0) --
uart0_txd_o => uart0_txd_o, -- UART0 send data
uart0_rxd_i => uart0_rxd_i -- UART0 receive data
);
-- GPIO output --
gpio_o <= con_gpio_o(7 downto 0);
end architecture;