neorv32/sw/example/demo_sdi/main.c

202 lines
7.7 KiB
C
Raw Permalink Normal View History

2024-02-24 08:25:27 +00:00
// #################################################################################################
// # << NEORV32 - Serial Data Interface Demo Program >> #
// # ********************************************************************************************* #
// # BSD 3-Clause License #
// # #
// # Copyright (c) 2023, Stephan Nolting. All rights reserved. #
// # #
// # Redistribution and use in source and binary forms, with or without modification, are #
// # permitted provided that the following conditions are met: #
// # #
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
// # conditions and the following disclaimer. #
// # #
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
// # conditions and the following disclaimer in the documentation and/or other materials #
// # provided with the distribution. #
// # #
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
// # endorse or promote products derived from this software without specific prior written #
// # permission. #
// # #
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
// # ********************************************************************************************* #
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
// #################################################################################################
/**********************************************************************//**
* @file demo_sdi/main.c
* @author Stephan Nolting
* @brief SDI test program (direct access to the SDI module).
**************************************************************************/
#include <neorv32.h>
#include <string.h>
/**********************************************************************//**
* @name User configuration
**************************************************************************/
/**@{*/
/** UART BAUD rate */
#define BAUD_RATE 19200
/**@}*/
// Prototypes
void sdi_put(void);
void sdi_get(void);
uint32_t hexstr_to_uint(char *buffer, uint8_t length);
/**********************************************************************//**
* This program provides an interactive console for the SDI module.
*
* @note This program requires UART0 and the SDI to be synthesized.
*
* @return Irrelevant.
**************************************************************************/
int main() {
char buffer[8];
int length = 0;
// capture all exceptions and give debug info via UART
neorv32_rte_setup();
// setup UART at default baud rate, no interrupts
neorv32_uart0_setup(BAUD_RATE, 0);
// check if UART0 unit is implemented at all
if (neorv32_uart0_available() == 0) {
return 1;
}
// intro
neorv32_uart0_printf("\n<<< SDI Test Program >>>\n\n");
// check if SDI unit is implemented at all
if (neorv32_sdi_available() == 0) {
neorv32_uart0_printf("ERROR! No SDI unit implemented.");
return 1;
}
// info
neorv32_uart0_printf("This program allows direct access to the SDI module.\n"
"Type 'help' to see the help menu.\n\n");
// setup SDI module
neorv32_sdi_setup(0); // no interrupts
// Main menu
for (;;) {
neorv32_uart0_printf("SDI_TEST:> ");
length = neorv32_uart0_scan(buffer, 15, 1);
neorv32_uart0_printf("\n");
if (!length) { // nothing to be done
continue;
}
// decode input and execute command
if (!strcmp(buffer, "help")) {
neorv32_uart0_printf("Available commands:\n"
" help - show this text\n"
" put - write byte to TX buffer\n"
" get - read byte from RX buffer\n"
" clr - clear RX buffer\n");
}
else if (!strcmp(buffer, "put")) {
sdi_put();
}
else if (!strcmp(buffer, "get")) {
sdi_get();
}
else if (!strcmp(buffer, "clr")) {
neorv32_sdi_rx_clear();
}
else {
neorv32_uart0_printf("Invalid command. Type 'help' to see all commands.\n");
}
}
return 0;
}
/**********************************************************************//**
* Write data to SDI TX buffer.
**************************************************************************/
void sdi_put(void) {
char terminal_buffer[3];
neorv32_uart0_printf("Enter TX data (2 hex chars): 0x");
neorv32_uart0_scan(terminal_buffer, sizeof(terminal_buffer), 1);
uint32_t tx_data = (uint32_t)hexstr_to_uint(terminal_buffer, strlen(terminal_buffer));
neorv32_uart0_printf("\nWriting 0x%x to SDI TX buffer... ", tx_data);
if (neorv32_sdi_put((uint8_t)tx_data)) {
neorv32_uart0_printf("FAILED! TX buffer is full.\n");
}
else {
neorv32_uart0_printf("ok\n");
}
}
/**********************************************************************//**
* Read data from SDI RX buffer.
**************************************************************************/
void sdi_get(void) {
uint8_t rx_data;
if (neorv32_sdi_get(&rx_data)) {
neorv32_uart0_printf("No RX data available (RX buffer is empty).\n");
}
else {
neorv32_uart0_printf("Read data: 0x%x\n", (uint32_t)rx_data);
}
}
/**********************************************************************//**
* Helper function to convert N hex chars string into uint32_T
*
* @param[in,out] buffer Pointer to array of chars to convert into number.
* @param[in,out] length Length of the conversion string.
* @return Converted number.
**************************************************************************/
uint32_t hexstr_to_uint(char *buffer, uint8_t length) {
uint32_t res = 0, d = 0;
char c = 0;
while (length--) {
c = *buffer++;
if ((c >= '0') && (c <= '9'))
d = (uint32_t)(c - '0');
else if ((c >= 'a') && (c <= 'f'))
d = (uint32_t)((c - 'a') + 10);
else if ((c >= 'A') && (c <= 'F'))
d = (uint32_t)((c - 'A') + 10);
else
d = 0;
res = res + (d << (length*4));
}
return res;
}