neorv32/sw/example/demo_xip/main.c

414 lines
17 KiB
C
Raw Permalink Normal View History

2024-02-24 08:25:27 +00:00
// #################################################################################################
// # << NEORV32 - Demo for the Execute In-Place (XIP) Module >> #
// # ********************************************************************************************* #
// # BSD 3-Clause License #
// # #
// # Copyright (c) 2024, Stephan Nolting. All rights reserved. #
// # #
// # Redistribution and use in source and binary forms, with or without modification, are #
// # permitted provided that the following conditions are met: #
// # #
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
// # conditions and the following disclaimer. #
// # #
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
// # conditions and the following disclaimer in the documentation and/or other materials #
// # provided with the distribution. #
// # #
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
// # endorse or promote products derived from this software without specific prior written #
// # permission. #
// # #
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
// # ********************************************************************************************* #
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
// #################################################################################################
/**********************************************************************//**
* @file demo_xip/main.c
* @author Stephan Nolting
* @brief Interactive console program to upload and execute a XIP program.
**************************************************************************/
#include <neorv32.h>
/**********************************************************************//**
* @name User configuration
**************************************************************************/
/**@{*/
/** UART BAUD rate */
#define BAUD_RATE 19200
/** Flash base address (32-bit) */
#define FLASH_BASE 0x00400000
/** Flash address bytes */
#define FLASH_ABYTES 3
/** XIP SPI clock prescaler select */
#define XIP_CLK_PRSC CLK_PRSC_128
/** Executable RAM buffer size in bytes */
#define BUFFER_SIZE (7*1024)
/**@}*/
/**********************************************************************//**
* SPI flash commands
**************************************************************************/
enum SPI_FLASH_CMD {
SPI_FLASH_CMD_WRITE = 0x02, /**< Write data */
SPI_FLASH_CMD_READ = 0x03, /**< Read data */
SPI_FLASH_CMD_READ_STATUS = 0x05, /**< Get status register */
SPI_FLASH_CMD_WRITE_ENABLE = 0x06, /**< Allow write access */
SPI_FLASH_CMD_SECTOR_ERASE = 0xD8 /**< Erase complete sector */
};
/**********************************************************************//**
* Valid executable identification signature
**************************************************************************/
#define EXE_SIGNATURE 0x4788CAFE
/**********************************************************************//**
* @name Prototypes
**************************************************************************/
void xip_flash_erase_sector(uint32_t base_addr);
void xip_flash_program(uint32_t *src, uint32_t base_addr, uint32_t size);
int uart_get_executable(uint32_t *dst, uint32_t *size);
uint32_t uart_get_word(void);
/**********************************************************************//**
* @name RAM storage for executable
**************************************************************************/
uint32_t ram_buffer[BUFFER_SIZE/4];
/**********************************************************************//**
* Main function
*
* @note This program requires the XIP module and UART0.
*
* @return 0 if execution was successful
**************************************************************************/
int main() {
// capture all exceptions and give debug info via UART
// this is not required, but keeps us safe
neorv32_rte_setup();
// setup UART at default baud rate, no interrupts
neorv32_uart0_setup(BAUD_RATE, 0);
// check if XIP module is implemented at all
if (neorv32_xip_available() == 0) {
neorv32_uart0_printf("Error! XIP module not synthesized!\n");
return 1;
}
// ----------------------------------------------------------
// Intro and setup
// ----------------------------------------------------------
neorv32_uart0_printf("<< XIP Demo Program >>\n\n");
// configuration note
neorv32_uart0_printf("Flash base address: 0x%x\n"
"XIP base address: 0x%x\n"
"Flash address bytes: %u\n", (uint32_t)FLASH_BASE, (uint32_t)XIP_MEM_BASE_ADDRESS, (uint32_t)FLASH_ABYTES);
// warning if XIP cache is not implemented
if ((NEORV32_XIP->CTRL & (1 << XIP_CTRL_BURST_EN)) == 0) {
neorv32_uart0_printf("WARNING! No XIP cache implemented! The XIP program might run very slow...\n");
}
// reset XIP module and configure basic SPI properties
// * clock prescaler = XIP_CLK_PRSC (see defines)
// * clock divider = 4
// * clock mode 0 (cpol = 0, cpha = 0)
// * flash read command = SPI_FLASH_CMD_READ (see defines)
// -> this function will also send 64 dummy clock cycles via the XIP's SPI port (with CS disabled)
neorv32_xip_setup(XIP_CLK_PRSC, 4, 0, 0, SPI_FLASH_CMD_READ);
neorv32_uart0_printf("XIP SPI clock speed: %u Hz\n\n", neorv32_xip_get_clock_speed());
// ----------------------------------------------------------
// Get executable for flash
// ----------------------------------------------------------
neorv32_uart0_printf("Compile a program for the XIP flash:\n"
"\n"
" Navigate to any example program folder (like 'neorv32/sw/example/hello_word').\n"
" Compile the program but relocate the executable to the beginning of the XIP flash:\n"
" make MARCH=rv32i_zicsr_zifencei USER_FLAGS+=\"-Wl,--defsym,__neorv32_rom_base=0x%x\" clean_all exe\n\n",
(uint32_t)(XIP_MEM_BASE_ADDRESS + FLASH_BASE));
neorv32_uart0_printf("Press any key when you are ready.\n\n");
neorv32_uart0_getc(); // wait for any key
neorv32_uart0_printf("Now send the generated neorv32_exe.bin file in raw byte mode...\n");
uint32_t exe_size = 0;
int rc = uart_get_executable(&ram_buffer[0], &exe_size);
// upload ok?
if (rc) {
neorv32_uart0_printf("[ERROR] Upload failed with error code %d!\n", rc);
return -1;
}
// image size in range?
if (exe_size > BUFFER_SIZE) {
neorv32_uart0_printf("[ERROR] Executable size out of range (%u bytes, maximum = %u bytes)!\n", exe_size, BUFFER_SIZE);
return -1;
}
else {
neorv32_uart0_printf("Executable upload successful (%u bytes).\n\n", exe_size);
}
// ----------------------------------------------------------
// Program flash
// ----------------------------------------------------------
// NOTE: this (direct SPI access via the XIP module) has to be done before the actual XIP mode is enabled!
neorv32_uart0_printf("Erasing XIP flash (base = 0x%x)...\n", (uint32_t)FLASH_BASE);
xip_flash_erase_sector(FLASH_BASE);
neorv32_uart0_printf("Programming XIP flash (%u bytes)...\n", exe_size);
xip_flash_program((uint32_t*)&ram_buffer[0], FLASH_BASE, exe_size);
// ----------------------------------------------------------
// Prepare XIP execution
// ----------------------------------------------------------
// configure and enable the actual XIP mode
// * configure FLASH_ABYTES address bytes send to the SPI flash for addressing
// * map the XIP flash to the address space starting at XIP_MEM_BASE_ADDRESS - only the 4 MSBs are relevant here
// after calling this function the SPI flash is mapped to the processor's address space and is accessible as "normal"
// memory-mapped read-only memory
if (neorv32_xip_start(FLASH_ABYTES)) {
neorv32_uart0_printf("Error! XIP mode configuration error!\n");
return 1;
}
// since the flash is now mapped to the processor's address space we can dump its content by using normal memory accesses
neorv32_uart0_printf("\nRead-back XIP flash content (first 10 words) via memory-mapped access...\n");
uint32_t flash_base_addr = XIP_MEM_BASE_ADDRESS + FLASH_BASE;
uint32_t *xip_mem = (uint32_t*)flash_base_addr;
asm volatile("fence");
uint32_t i;
for (i=0; i<10; i++) {
neorv32_uart0_printf("[0x%x] 0x%x\n", flash_base_addr + 4*i, xip_mem[i]);
}
// the flash is READ-ONLY in XIP mode - any write access to the XIP-mapped memory page will raise
// a store bus exception / device error (captured by the NEORV32 runtime environment)
neorv32_uart0_printf("\nTest write access to XIP memory (will raise an exception)...\n");
*xip_mem = 0; // try to write to the flash using XIP
// ----------------------------------------------------------
// Run program from flash
// ----------------------------------------------------------
// finally, jump to the XIP flash's base address we have configured to start execution **from there**
neorv32_uart0_printf("\nStarting Execute In-Place program (@0x%x)...\n", (uint32_t)(XIP_MEM_BASE_ADDRESS + FLASH_BASE));
asm volatile("fence.i");
asm volatile ("call %[dest]" : : [dest] "i" (XIP_MEM_BASE_ADDRESS + FLASH_BASE));
// this should never be reached
neorv32_uart0_printf("Error! Starting XIP program failed!\n");
return 1;
}
// ============================================================================================================
// Helper functions
// ============================================================================================================
/**********************************************************************//**
* Erase sector starting at base address.
*
* @param[in] base_addr Base address of sector to erase.
**************************************************************************/
void xip_flash_erase_sector(uint32_t base_addr) {
uint32_t tmp = 0;
union {
uint64_t uint64;
uint32_t uint32[sizeof(uint64_t)/sizeof(uint32_t)];
} data;
// set write-enable latch
// 1 byte command
data.uint32[0] = 0;
data.uint32[1] = SPI_FLASH_CMD_WRITE_ENABLE << 24; // command: set write-enable latch
neorv32_xip_spi_trans(1, &data.uint64);
// execute sector erase command
// 1 byte command, FLASH_ABYTES bytes address
tmp = SPI_FLASH_CMD_SECTOR_ERASE << 24; // command: erase sector
if (FLASH_ABYTES == 1) { tmp |= (base_addr & 0x000000FF) << 16; } // address
if (FLASH_ABYTES == 2) { tmp |= (base_addr & 0x0000FFFF) << 8; } // address
if (FLASH_ABYTES == 3) { tmp |= (base_addr & 0x00FFFFFF) << 0; } // address
data.uint32[0] = 0;
data.uint32[1] = tmp;
neorv32_xip_spi_trans(1 + FLASH_ABYTES, &data.uint64);
// check status register: WIP bit has to clear
while(1) {
tmp = SPI_FLASH_CMD_READ_STATUS << 24; // read status register command
data.uint32[0] = 0;
data.uint32[1] = tmp;
neorv32_xip_spi_trans(2, &data.uint64);
if ((data.uint32[0] & 0x01) == 0) { // WIP bit cleared?
break;
}
}
}
/**********************************************************************//**
* Helper function to program the XIP flash via the direct SPI access feature of the XIP module.
*
* @warning This function can only be used BEFORE the XIP-mode is activated!
* @note This function is blocking and performs individual writes for each byte (little-endian byte order!).
*
* @param[in] src Pointer to data that will be copied to flash (32-bit).
* @param[in] base_addr Image base address (in flash).
* @param[in] size Image size in bytes.
* @return Returns 0 if write was successful.
**************************************************************************/
void xip_flash_program(uint32_t *src, uint32_t base_addr, uint32_t size) {
uint32_t data_byte = 0;
uint32_t cnt = 0;
uint32_t flash_addr = base_addr;
uint32_t tmp = 0;
union {
uint64_t uint64;
uint32_t uint32[sizeof(uint64_t)/sizeof(uint32_t)];
} data;
while (1) {
// get data byte
data_byte = src[cnt/4];
data_byte >>= (cnt & 3) * 8; // little-endian byte order!
data_byte &= 0x000000FF;
// set write-enable latch
// 1 byte command
data.uint32[0] = 0;
data.uint32[1] = SPI_FLASH_CMD_WRITE_ENABLE << 24; // command: set write-enable latch
neorv32_xip_spi_trans(1, &data.uint64);
// write byte
// 1 byte command, FLASH_ABYTES bytes address, 1 byte data
data.uint32[1] = SPI_FLASH_CMD_WRITE << 24; // command: byte write
data.uint32[0] = 0;
if (FLASH_ABYTES == 1) { data.uint32[1] |= (flash_addr & 0x000000FF) << 16; } // address
if (FLASH_ABYTES == 2) { data.uint32[1] |= (flash_addr & 0x0000FFFF) << 8; } // address
if (FLASH_ABYTES == 3) { data.uint32[1] |= (flash_addr & 0x00FFFFFF) << 0; } // address
if (FLASH_ABYTES == 1) { data.uint32[1] |= data_byte << 8; } // data byte
if (FLASH_ABYTES == 2) { data.uint32[1] |= data_byte << 0; } // data byte
if (FLASH_ABYTES == 3) { data.uint32[0] = data_byte << 24; } // data byte
neorv32_xip_spi_trans(2 + FLASH_ABYTES, &data.uint64);
flash_addr++;
// check status register: WIP bit has to clear
while(1) {
tmp = SPI_FLASH_CMD_READ_STATUS << 24; // read status register command
data.uint32[0] = 0;
data.uint32[1] = tmp;
neorv32_xip_spi_trans(2, &data.uint64);
if ((data.uint32[0] & 0x01) == 0) { // WIP bit cleared?
break;
}
}
// done?
cnt++;
if (cnt == size) {
break;
}
}
}
/**********************************************************************//**
* Get NEORV32 executable via UART.
*
* @param[in] dst Pointer to uin32_t data array where the executable will be stored.
* @param[out] length Pointer to a uin32_t to store the executable size in bytes.
* @return Returns 0 on success.
**************************************************************************/
int uart_get_executable(uint32_t *dst, uint32_t *length) {
// check if valid image
uint32_t signature = uart_get_word();
if (signature != EXE_SIGNATURE) {
return -1;
}
// image size and checksum
uint32_t size = uart_get_word(); // size in bytes
uint32_t check = uart_get_word(); // complement sum checksum
*length = size;
// transfer program data
uint32_t checksum = 0;
uint32_t d = 0, i = 0;
while (i < (size/4)) { // in words
d = uart_get_word();
checksum += d;
dst[i++] = d;
}
// error during transfer?
if ((checksum + check) != 0) {
return -2;
}
return 0;
}
/**********************************************************************//**
* Get 32-bit word from UART.
*
* @return 32-bit data word.
**************************************************************************/
uint32_t uart_get_word(void) {
union {
uint32_t uint32;
uint8_t uint8[sizeof(uint32_t)];
} data;
uint32_t i;
for (i=0; i<4; i++) {
data.uint8[i] = (uint8_t)neorv32_uart0_getc();
}
return data.uint32;
}