neorv32/sw/lib/include/neorv32_onewire.h

118 lines
7.4 KiB
C
Raw Normal View History

2024-02-24 08:25:27 +00:00
// #################################################################################################
// # << NEORV32: neorv32_onewire.h - 1-Wire Interface Controller HW Driver (Header) >> #
// # ********************************************************************************************* #
// # BSD 3-Clause License #
// # #
// # Copyright (c) 2022, Stephan Nolting. All rights reserved. #
// # #
// # Redistribution and use in source and binary forms, with or without modification, are #
// # permitted provided that the following conditions are met: #
// # #
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
// # conditions and the following disclaimer. #
// # #
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
// # conditions and the following disclaimer in the documentation and/or other materials #
// # provided with the distribution. #
// # #
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
// # endorse or promote products derived from this software without specific prior written #
// # permission. #
// # #
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
// # ********************************************************************************************* #
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
// #################################################################################################
/**********************************************************************//**
* @file neorv32_onewire.h
* @brief 1-Wire Interface Controller (ONEWIRE) HW driver header file.
*
* @note These functions should only be used if the ONEWIRE unit was synthesized (IO_ONEWIRE_EN = true).
**************************************************************************/
#ifndef neorv32_onewire_h
#define neorv32_onewire_h
/**********************************************************************//**
* @name IO Device: 1-Wire Interface Controller (ONEWIRE)
**************************************************************************/
/**@{*/
/** ONEWIRE module prototype */
typedef volatile struct __attribute__((packed,aligned(4))) {
uint32_t CTRL; /**< offset 0: control register (#NEORV32_ONEWIRE_CTRL_enum) */
uint32_t DATA; /**< offset 4: transmission data register (#NEORV32_ONEWIRE_DATA_enum) */
} neorv32_onewire_t;
/** ONEWIRE module hardware access (#neorv32_onewire_t) */
#define NEORV32_ONEWIRE ((neorv32_onewire_t*) (NEORV32_ONEWIRE_BASE))
/** ONEWIRE control register bits */
enum NEORV32_ONEWIRE_CTRL_enum {
ONEWIRE_CTRL_EN = 0, /**< ONEWIRE control register(0) (r/w): ONEWIRE controller enable */
ONEWIRE_CTRL_PRSC0 = 1, /**< ONEWIRE control register(1) (r/w): Clock prescaler select bit 0 */
ONEWIRE_CTRL_PRSC1 = 2, /**< ONEWIRE control register(2) (r/w): Clock prescaler select bit 1 */
ONEWIRE_CTRL_CLKDIV0 = 3, /**< ONEWIRE control register(3) (r/w): Clock divider bit 0 */
ONEWIRE_CTRL_CLKDIV1 = 4, /**< ONEWIRE control register(4) (r/w): Clock divider bit 1 */
ONEWIRE_CTRL_CLKDIV2 = 5, /**< ONEWIRE control register(5) (r/w): Clock divider bit 2 */
ONEWIRE_CTRL_CLKDIV3 = 6, /**< ONEWIRE control register(6) (r/w): Clock divider bit 3 */
ONEWIRE_CTRL_CLKDIV4 = 7, /**< ONEWIRE control register(7) (r/w): Clock divider bit 4 */
ONEWIRE_CTRL_CLKDIV5 = 8, /**< ONEWIRE control register(8) (r/w): Clock divider bit 5 */
ONEWIRE_CTRL_CLKDIV6 = 9, /**< ONEWIRE control register(9) (r/w): Clock divider bit 6 */
ONEWIRE_CTRL_CLKDIV7 = 10, /**< ONEWIRE control register(10) (r/w): Clock divider bit 7 */
ONEWIRE_CTRL_TRIG_RST = 11, /**< ONEWIRE control register(11) (-/w): Trigger reset pulse, auto-clears */
ONEWIRE_CTRL_TRIG_BIT = 12, /**< ONEWIRE control register(12) (-/w): Trigger single-bit transmission, auto-clears */
ONEWIRE_CTRL_TRIG_BYTE = 13, /**< ONEWIRE control register(13) (-/w): Trigger full-byte transmission, auto-clears */
ONEWIRE_CTRL_SENSE = 29, /**< ONEWIRE control register(29) (r/-): Current state of the bus line */
ONEWIRE_CTRL_PRESENCE = 30, /**< ONEWIRE control register(30) (r/-): Bus presence detected */
ONEWIRE_CTRL_BUSY = 31, /**< ONEWIRE control register(31) (r/-): Operation in progress when set */
};
/** ONEWIRE receive/transmit data register bits */
enum NEORV32_ONEWIRE_DATA_enum {
ONEWIRE_DATA_LSB = 0, /**< ONEWIRE data register(0) (r/w): Receive/transmit data (8-bit) LSB */
ONEWIRE_DATA_MSB = 7 /**< ONEWIRE data register(7) (r/w): Receive/transmit data (8-bit) MSB */
};
/**@}*/
/**********************************************************************//**
* @name Prototypes
**************************************************************************/
/**@{*/
int neorv32_onewire_available(void);
int neorv32_onewire_setup(uint32_t t_base);
void neorv32_onewire_enable(void);
void neorv32_onewire_disable(void);
int neorv32_onewire_sense(void);
int neorv32_onewire_busy(void);
void neorv32_onewire_reset(void);
int neorv32_onewire_reset_get_presence(void);
void neorv32_onewire_read_bit(void);
uint8_t neorv32_onewire_read_bit_get(void);
void neorv32_onewire_write_bit(uint8_t bit);
void neorv32_onewire_read_byte(void);
uint8_t neorv32_onewire_read_byte_get(void);
void neorv32_onewire_write_byte(uint8_t byte);
int neorv32_onewire_reset_blocking(void);
uint8_t neorv32_onewire_read_bit_blocking(void);
void neorv32_onewire_write_bit_blocking(uint8_t bit);
uint8_t neorv32_onewire_read_byte_blocking(void);
void neorv32_onewire_write_byte_blocking(uint8_t byte);
/**@}*/
#endif // neorv32_onewire_h