172 lines
9.4 KiB
VHDL
172 lines
9.4 KiB
VHDL
-- #################################################################################################
|
|
-- # << NEORV32 - Example setup for boards with UP5K devices >> #
|
|
-- # ********************************************************************************************* #
|
|
-- # BSD 3-Clause License #
|
|
-- # #
|
|
-- # Copyright (c) 2023, Stephan Nolting. All rights reserved. #
|
|
-- # #
|
|
-- # Redistribution and use in source and binary forms, with or without modification, are #
|
|
-- # permitted provided that the following conditions are met: #
|
|
-- # #
|
|
-- # 1. Redistributions of source code must retain the above copyright notice, this list of #
|
|
-- # conditions and the following disclaimer. #
|
|
-- # #
|
|
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
|
|
-- # conditions and the following disclaimer in the documentation and/or other materials #
|
|
-- # provided with the distribution. #
|
|
-- # #
|
|
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
|
|
-- # endorse or promote products derived from this software without specific prior written #
|
|
-- # permission. #
|
|
-- # #
|
|
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
|
|
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
|
|
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
|
|
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
|
|
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
|
|
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
|
|
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
|
|
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
|
|
-- # OF THE POSSIBILITY OF SUCH DAMAGE. #
|
|
-- # ********************************************************************************************* #
|
|
-- # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
|
|
-- #################################################################################################
|
|
|
|
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
library neorv32;
|
|
|
|
entity neorv32_ProcessorTop_UP5KDemo is
|
|
generic (
|
|
-- General --
|
|
CLOCK_FREQUENCY : natural := 0; -- clock frequency of clk_i in Hz
|
|
-- Internal Instruction memory --
|
|
MEM_INT_IMEM_EN : boolean := true; -- implement processor-internal instruction memory
|
|
MEM_INT_IMEM_SIZE : natural := 64*1024; -- size of processor-internal instruction memory in bytes
|
|
-- Internal Data memory --
|
|
MEM_INT_DMEM_EN : boolean := true; -- implement processor-internal data memory
|
|
MEM_INT_DMEM_SIZE : natural := 64*1024; -- size of processor-internal data memory in bytes
|
|
-- Processor peripherals --
|
|
IO_GPIO_NUM : natural := 64; -- number of GPIO input/output pairs (0..64)
|
|
IO_PWM_NUM_CH : natural := 3 -- number of PWM channels to implement (0..12); 0 = disabled
|
|
);
|
|
port (
|
|
-- Global control --
|
|
clk_i : in std_logic;
|
|
rstn_i : in std_logic;
|
|
-- GPIO (available if IO_GPIO_NUM > 0) --
|
|
gpio_i : in std_ulogic_vector(3 downto 0);
|
|
gpio_o : out std_ulogic_vector(3 downto 0);
|
|
-- primary UART0 (available if IO_UART0_EN = true) --
|
|
uart_txd_o : out std_ulogic; -- UART0 send data
|
|
uart_rxd_i : in std_ulogic := '0'; -- UART0 receive data
|
|
-- SPI to on-board flash --
|
|
flash_sck_o : out std_ulogic;
|
|
flash_sdo_o : out std_ulogic;
|
|
flash_sdi_i : in std_ulogic;
|
|
flash_csn_o : out std_ulogic; -- NEORV32.SPI_CS(0)
|
|
-- SPI (available if IO_SPI_EN = true) --
|
|
spi_sck_o : out std_ulogic;
|
|
spi_sdo_o : out std_ulogic;
|
|
spi_sdi_i : in std_ulogic;
|
|
spi_csn_o : out std_ulogic; -- NEORV32.SPI_CS(1)
|
|
-- TWI (available if IO_TWI_EN = true) --
|
|
twi_sda_io : inout std_logic;
|
|
twi_scl_io : inout std_logic;
|
|
-- PWM (available if IO_PWM_NUM_CH > 0) --
|
|
pwm_o : out std_ulogic_vector(IO_PWM_NUM_CH-1 downto 0)
|
|
);
|
|
end entity;
|
|
|
|
architecture neorv32_ProcessorTop_UP5KDemo_rtl of neorv32_ProcessorTop_UP5KDemo is
|
|
|
|
-- internal IO connection --
|
|
signal con_gpio_o : std_ulogic_vector(63 downto 0);
|
|
signal con_gpio_i : std_ulogic_vector(63 downto 0);
|
|
signal con_pwm_o : std_ulogic_vector(11 downto 0);
|
|
signal con_spi_sck : std_ulogic;
|
|
signal con_spi_sdi : std_ulogic;
|
|
signal con_spi_sdo : std_ulogic;
|
|
signal con_spi_csn : std_ulogic_vector(07 downto 0);
|
|
signal con_twi_sda_i : std_ulogic;
|
|
signal con_twi_sda_o : std_ulogic;
|
|
signal con_twi_scl_i : std_ulogic;
|
|
signal con_twi_scl_o : std_ulogic;
|
|
|
|
begin
|
|
|
|
-- The core of the problem ----------------------------------------------------------------
|
|
-- -------------------------------------------------------------------------------------------
|
|
neorv32_inst: entity neorv32.neorv32_top
|
|
generic map (
|
|
-- General --
|
|
CLOCK_FREQUENCY => CLOCK_FREQUENCY, -- clock frequency of clk_i in Hz
|
|
INT_BOOTLOADER_EN => true, -- boot configuration: true = boot explicit bootloader; false = boot from int/ext (I)MEM
|
|
-- RISC-V CPU Extensions --
|
|
CPU_EXTENSION_RISCV_M => true, -- implement mul/div extension?
|
|
CPU_EXTENSION_RISCV_U => true, -- implement user mode extension?
|
|
CPU_EXTENSION_RISCV_Zicntr => true, -- implement base counters?
|
|
-- Internal Instruction memory --
|
|
MEM_INT_IMEM_EN => MEM_INT_IMEM_EN, -- implement processor-internal instruction memory
|
|
MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
|
|
-- Internal Data memory --
|
|
MEM_INT_DMEM_EN => MEM_INT_DMEM_EN, -- implement processor-internal data memory
|
|
MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
|
|
-- Processor peripherals --
|
|
IO_GPIO_NUM => IO_GPIO_NUM, -- number of GPIO input/output pairs (0..64)
|
|
IO_MTIME_EN => true, -- implement machine system timer (MTIME)?
|
|
IO_UART0_EN => true, -- implement primary universal asynchronous receiver/transmitter (UART0)?
|
|
IO_SPI_EN => true, -- implement serial peripheral interface (SPI)?
|
|
IO_TWI_EN => true, -- implement two-wire interface (TWI)?
|
|
IO_PWM_NUM_CH => IO_PWM_NUM_CH -- number of PWM channels to implement (0..12); 0 = disabled
|
|
)
|
|
port map (
|
|
-- Global control --
|
|
clk_i => clk_i, -- global clock, rising edge
|
|
rstn_i => rstn_i, -- global reset, low-active, async
|
|
-- GPIO (available if IO_GPIO_NUM > 0) --
|
|
gpio_o => con_gpio_o, -- parallel output
|
|
gpio_i => con_gpio_i, -- parallel input
|
|
-- primary UART0 (available if IO_UART0_EN = true) --
|
|
uart0_txd_o => uart_txd_o, -- UART0 send data
|
|
uart0_rxd_i => uart_rxd_i, -- UART0 receive data
|
|
-- TWI (available if IO_TWI_EN = true) --
|
|
twi_sda_i => con_twi_sda_i, -- serial data line sense input
|
|
twi_sda_o => con_twi_sda_o, -- serial data line output (pull low only)
|
|
twi_scl_i => con_twi_scl_i, -- serial clock line sense input
|
|
twi_scl_o => con_twi_scl_o, -- serial clock line output (pull low only)
|
|
-- PWM (available if IO_PWM_NUM_CH > 0) --
|
|
pwm_o => con_pwm_o -- pwm channels
|
|
);
|
|
|
|
-- SPI: on-board flash --
|
|
flash_sck_o <= con_spi_sck;
|
|
flash_sdo_o <= con_spi_sdo;
|
|
flash_csn_o <= con_spi_csn(0);
|
|
|
|
-- SPI: user port --
|
|
spi_sck_o <= con_spi_sck;
|
|
spi_sdo_o <= con_spi_sdo;
|
|
spi_csn_o <= con_spi_csn(1);
|
|
|
|
con_spi_sdi <= flash_sdi_i when (con_spi_csn(0) = '0') else spi_sdi_i;
|
|
|
|
-- GPIO --
|
|
gpio_o <= con_gpio_o(3 downto 0);
|
|
con_gpio_i(03 downto 0) <= gpio_i;
|
|
con_gpio_i(63 downto 4) <= (others => '0');
|
|
|
|
-- PWM --
|
|
pwm_o <= con_pwm_o(IO_PWM_NUM_CH-1 downto 0);
|
|
|
|
-- TWI tri-state driver --
|
|
twi_sda_io <= '0' when (con_twi_sda_o = '0') else 'Z'; -- module can only pull the line low actively
|
|
twi_scl_io <= '0' when (con_twi_scl_o = '0') else 'Z';
|
|
con_twi_sda_i <= std_ulogic(twi_sda_io);
|
|
con_twi_scl_i <= std_ulogic(twi_scl_io);
|
|
|
|
|
|
end architecture;
|