neorv32/sw/common/neorv32.ld

319 lines
16 KiB
Plaintext

/* ################################################################################################# */
/* # << NEORV32 - RISC-V GCC Linker Script >> # */
/* # ********************************************************************************************* # */
/* # BSD 3-Clause License # */
/* # # */
/* # The NEORV32 RISC-V Processor, https://github.com/stnolting/neorv32 # */
/* # Copyright (c) 2024, Stephan Nolting. All rights reserved. # */
/* # # */
/* # Redistribution and use in source and binary forms, with or without modification, are # */
/* # permitted provided that the following conditions are met: # */
/* # # */
/* # 1. Redistributions of source code must retain the above copyright notice, this list of # */
/* # conditions and the following disclaimer. # */
/* # # */
/* # 2. Redistributions in binary form must reproduce the above copyright notice, this list of # */
/* # conditions and the following disclaimer in the documentation and/or other materials # */
/* # provided with the distribution. # */
/* # # */
/* # 3. Neither the name of the copyright holder nor the names of its contributors may be used to # */
/* # endorse or promote products derived from this software without specific prior written # */
/* # permission. # */
/* # # */
/* # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS # */
/* # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # */
/* # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # */
/* # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # */
/* # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE # */
/* # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # */
/* # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # */
/* # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED # */
/* # OF THE POSSIBILITY OF SUCH DAMAGE. # */
/* ################################################################################################# */
/* Copyright (C) 2014-2020 Free Software Foundation, Inc.
* Copying and distribution of this script, with or without modification,
* are permitted in any medium without royalty provided the copyright
* notice and this notice are preserved. */
OUTPUT_FORMAT("elf32-littleriscv")
OUTPUT_ARCH(riscv)
ENTRY(_start)
SEARCH_DIR("/opt/riscv/riscv32-unknown-elf/lib")
SEARCH_DIR("=/usr/local/lib")
SEARCH_DIR("=/lib")
SEARCH_DIR("=/usr/lib")
/* ************************************************************************************************* */
/* +++ NEORV32 memory layout configuration +++ */
/* If the symbols are not explicitly defined the default configurations are used. If required, only */
/* edit the very last entry in each row. */
/* NOTE: section sizes have to be a multiple of 4 bytes; base addresses have to be 32-bit-aligned. */
/* ************************************************************************************************* */
/* Default rom/ram (IMEM/DMEM) sizes */
__neorv32_rom_size = DEFINED(__neorv32_rom_size) ? __neorv32_rom_size : 2048M;
__neorv32_ram_size = DEFINED(__neorv32_ram_size) ? __neorv32_ram_size : 8K;
/* Default HEAP size (= 0; no heap at all) */
__neorv32_heap_size = DEFINED(__neorv32_heap_size) ? __neorv32_heap_size : 0;
/* Default section base addresses */
__neorv32_rom_base = DEFINED(__neorv32_rom_base) ? __neorv32_rom_base : 0x00000000;
__neorv32_ram_base = DEFINED(__neorv32_ram_base) ? __neorv32_ram_base : 0x80000000;
/* ************************************************************************************************* */
/* when compiling the bootloader the ROM section is automatically re-mapped to the */
/* processor-internal bootloader ROM address space. */
/* ************************************************************************************************* */
MEMORY
{
rom (rx) : ORIGIN = DEFINED(make_bootloader) ? 0xFFFFC000 : __neorv32_rom_base, LENGTH = DEFINED(make_bootloader) ? 8K : __neorv32_rom_size
ram (rwx) : ORIGIN = __neorv32_ram_base, LENGTH = DEFINED(make_bootloader) ? 512 : __neorv32_ram_size
}
/* ************************************************************************************************* */
/* Section ".text" - program code */
/* This is the first part of the actual/final executable */
/* ************************************************************************************************* */
SECTIONS
{
.text : ALIGN(4)
{
PROVIDE(__text_start = .);
PROVIDE(__textstart = .);
KEEP(*(.text.crt0)); /* keep start-up code crt0 right at the beginning of rom */
*(.text.unlikely .text.*_unlikely .text.unlikely.*)
*(.text.exit .text.exit.*)
*(.text.startup .text.startup.*)
*(.text.hot .text.hot.*)
*(SORT(.text.sorted.*))
*(.text .stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf.em. */
*(.gnu.warning)
/* these are a list of 32-bit pointers that point to functions
* that are called before/after executing "main". */
/* The following defines an array with constructors, which are called
* from crt0.s before "main", but of course after data init / bss clear. */
PROVIDE_HIDDEN(__init_array_start = .);
KEEP (*(.preinit_array))
KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
PROVIDE_HIDDEN(__init_array_end = .);
KEEP (*(SORT_NONE(.init)))
KEEP (*(SORT_NONE(.fini)))
/* main should never return, but if it does, the destructors are called. */
PROVIDE_HIDDEN(__fini_array_start = .);
KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
PROVIDE_HIDDEN(__fini_array_end = .);
/* finish section on WORD boundary */
. = ALIGN(4);
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
} > rom
/* ************************************************************************************************* */
/* Section ".rodata" - read-only constants and ".data" initialization */
/* This is the second part of the actual/final executable the will be places right after ".text" */
/* ************************************************************************************************* */
.rodata __etext :
{
/* constant data like strings */
*(.rodata .rodata.* .gnu.linkonce.r.*)
*(.rodata1)
/* finish section on WORD boundary */
. = ALIGN(4);
__RODATA_END__ = .;
} > rom
/* ************************************************************************************************* */
/* Section ".data" - pre-initialized variables */
/* The start-up code will initialize this RAM section from the executable's ".rodata" section */
/* ************************************************************************************************* */
.data : ALIGN(4)
{
__DATA_BEGIN__ = .;
__SDATA_BEGIN__ = .;
*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
*(.data1)
*(.data .data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
*(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*)
*(.dynamic)
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
*(.srodata.cst16) *(.srodata.cst8) *(.srodata.cst4) *(.srodata.cst2) *(.srodata .srodata.*)
*(.sdata .sdata.* .gnu.linkonce.s.*)
PROVIDE_HIDDEN (__tdata_start = .);
*(.tdata .tdata.* .gnu.linkonce.td.*)
/* finish section on WORD boundary */
. = ALIGN(4);
_edata = .;
PROVIDE (edata = .);
__DATA_END__ = .;
__global_pointer$ = __DATA_END__ + 0x800;
} > ram AT > rom
/* ************************************************************************************************* */
/* Section ".bss" - non-initialized variables */
/* The start-up code will clear this section during boot-up */
/* ************************************************************************************************* */
.bss (NOLOAD): ALIGN(4)
{
__BSS_START__ = .;
*(.dynsbss)
*(.sbss .sbss.* .gnu.linkonce.sb.*)
*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)
*(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon)
*(.scommon)
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections.
FIXME: Why do we need it? When there is no .bss section, we do not
pad the .data section. */
. = ALIGN(. != 0 ? 32 / 8 : 1);
/* finish section on WORD boundary */
. = ALIGN(4);
__BSS_END__ = .;
_end = .; PROVIDE (end = .);
} > ram
/* ************************************************************************************************* */
/* Section ".heap" - dynamic memory (e.g. malloc) */
/* ************************************************************************************************* */
.heap : ALIGN(4)
{
PROVIDE(__heap_start = .);
. = __neorv32_heap_size;
/* finish section on WORD boundary */
. = ALIGN(4);
PROVIDE(__heap_end = .);
} > ram
/* ************************************************************************************************* */
/* Unused sections */
/* ************************************************************************************************* */
.jcr : { KEEP (*(.jcr)) }
.got : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) } .interp : { *(.interp) }
.note.gnu.build-id : { *(.note.gnu.build-id) }
.hash : { *(.hash) }
.gnu.hash : { *(.gnu.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.rela.init : { *(.rela.init) }
.rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
.rela.fini : { *(.rela.fini) }
.rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
.rela.data.rel.ro : { *(.rela.data.rel.ro .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*) }
.rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
.rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
.rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
.rela.ctors : { *(.rela.ctors) }
.rela.dtors : { *(.rela.dtors) }
.rela.got : { *(.rela.got) }
.rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
.rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
.rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
.rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
.rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
/* ************************************************************************************************* */
/* Debug symbols */
/* ************************************************************************************************* */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.gnu.build.attributes : { *(.gnu.build.attributes .gnu.build.attributes.*) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* DWARF 3 */
.debug_pubtypes 0 : { *(.debug_pubtypes) }
.debug_ranges 0 : { *(.debug_ranges) }
/* DWARF Extension. */
.debug_macro 0 : { *(.debug_macro) }
.debug_addr 0 : { *(.debug_addr) }
.gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
/* ************************************************************************************************* */
/* Export symbols for neorv32 crt0 start-up code */
/* ************************************************************************************************* */
PROVIDE(__crt0_max_heap = __neorv32_heap_size);
PROVIDE(__crt0_imem_begin = ORIGIN(rom));
PROVIDE(__crt0_dmem_begin = ORIGIN(ram));
PROVIDE(__crt0_stack_end = (ORIGIN(ram) + LENGTH(ram)) - 1);
PROVIDE(__crt0_bss_start = __BSS_START__);
PROVIDE(__crt0_bss_end = __BSS_END__);
PROVIDE(__crt0_copy_data_src_begin = LOADADDR(.data));
PROVIDE(__crt0_copy_data_dst_begin = ADDR(.data));
PROVIDE(__crt0_copy_data_dst_end = ADDR(.data) + SIZEOF(.data));
}