FPGALover
/
neorv32
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
neorv32/sw/example/processor_check/main.c

2386 lines
76 KiB
C
Raw Permalink Blame History

// #################################################################################################
// # << NEORV32 - Processor Test Program >> #
// # ********************************************************************************************* #
// # BSD 3-Clause License #
// # #
// # Copyright (c) 2024, Stephan Nolting. All rights reserved. #
// # #
// # Redistribution and use in source and binary forms, with or without modification, are #
// # permitted provided that the following conditions are met: #
// # #
// # 1. Redistributions of source code must retain the above copyright notice, this list of #
// # conditions and the following disclaimer. #
// # #
// # 2. Redistributions in binary form must reproduce the above copyright notice, this list of #
// # conditions and the following disclaimer in the documentation and/or other materials #
// # provided with the distribution. #
// # #
// # 3. Neither the name of the copyright holder nor the names of its contributors may be used to #
// # endorse or promote products derived from this software without specific prior written #
// # permission. #
// # #
// # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS #
// # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF #
// # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
// # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, #
// # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
// # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED #
// # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING #
// # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED #
// # OF THE POSSIBILITY OF SUCH DAMAGE. #
// # ********************************************************************************************* #
// # The NEORV32 Processor - https://github.com/stnolting/neorv32 (c) Stephan Nolting #
// #################################################################################################
/**********************************************************************//**
* @file processor_check/main.c
* @author Stephan Nolting
* @brief CPU/Processor test/verification program.
**************************************************************************/
#include <neorv32.h>
#include <string.h>
/**********************************************************************//**
* @name User configuration
**************************************************************************/
/**@{*/
//** UART BAUD rate */
#define BAUD_RATE (19200)
//** Reachable but unaligned address */
#define ADDR_UNALIGNED_1 (0x00000001UL)
//** Reachable but unaligned address */
#define ADDR_UNALIGNED_3 (0x00000003UL)
//** Unreachable word-aligned address */
#define ADDR_UNREACHABLE ((uint32_t)&NEORV32_DM->SREG)
//** Read-only word-aligned address */
#define ADDR_READONLY ((uint32_t)&NEORV32_SYSINFO->CLK)
//** External memory base address */
#define EXT_MEM_BASE (0xF0000000UL)
/**@}*/
/**********************************************************************//**
* @name UART print macros
**************************************************************************/
/**@{*/
//** for simulation only! */
#ifdef SUPPRESS_OPTIONAL_UART_PRINT
//** print standard output to UART0 */
#define PRINT_STANDARD(...)
//** print critical output to UART1 */
#define PRINT_CRITICAL(...) neorv32_uart1_printf(__VA_ARGS__)
#else
//** print standard output to UART0 */
#define PRINT_STANDARD(...) neorv32_uart0_printf(__VA_ARGS__)
//** print critical output to UART0 */
#define PRINT_CRITICAL(...) neorv32_uart0_printf(__VA_ARGS__)
#endif
/**@}*/
// Prototypes
void sim_irq_trigger(uint32_t sel);
void global_trap_handler(void);
void rte_service_handler(void);
void vectored_irq_table(void) __attribute__((naked, aligned(128)));
void vectored_global_handler(void) __attribute__((interrupt("machine")));
void vectored_mei_handler(void) __attribute__((interrupt("machine")));
void __attribute__ ((interrupt)) hw_breakpoint_handler(void);
void __attribute__ ((noinline)) trigger_module_dummy(void);
void xirq_trap_handler0(void);
void xirq_trap_handler1(void);
void test_ok(void);
void test_fail(void);
// MCAUSE value that will be NEVER set by the hardware
const uint32_t mcause_never_c = 0x80000000UL; // = reserved
// Global variables
volatile int cnt_fail = 0; // global counter for failing tests
volatile int cnt_ok = 0; // global counter for successful tests
volatile int cnt_test = 0; // global counter for total number of tests
volatile uint32_t num_hpm_cnts_global = 0; // global number of available hpms
volatile int vectored_mei_handler_ack = 0; // vectored mei trap handler acknowledge
volatile uint32_t xirq_trap_handler_ack = 0; // xirq trap handler acknowledge
volatile uint32_t hw_brk_mscratch_ok = 0; // set when mepc was correct in trap handler
volatile uint32_t dma_src; // dma source & destination data
volatile uint32_t store_access_addr[2]; // variable to test store accesses
volatile uint32_t amo_var; // variable for testing atomic memory accesses
volatile uint32_t __attribute__((aligned(4))) pmp_access[2]; // variable to test pmp
volatile uint32_t trap_cnt; // number of triggered traps
volatile uint32_t pmp_num_regions; // number of implemented pmp regions
/**********************************************************************//**
* High-level CPU/processor test program.
*
* @warning This test is intended for simulation only.
* @warning This test requires all optional extensions/modules to be enabled.
*
* @return 0 if execution was successful
**************************************************************************/
int main() {
uint32_t tmp_a, tmp_b;
uint8_t id;
// disable machine-mode interrupts
neorv32_cpu_csr_clr(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
// setup UARTs at default baud rate, no interrupts
neorv32_uart0_setup(BAUD_RATE, 0);
NEORV32_UART1->CTRL = 0;
NEORV32_UART1->CTRL = NEORV32_UART0->CTRL;
#ifdef SUPPRESS_OPTIONAL_UART_PRINT
neorv32_uart0_disable(); // do not generate any UART0 output
#endif
// setup RTE
// -----------------------------------------------
neorv32_rte_setup(); // this will install a full-detailed debug handler for ALL traps
int install_err = 0;
// initialize ALL provided trap handler (overriding the default debug handlers)
for (id=0; id<NEORV32_RTE_NUM_TRAPS; id++) {
install_err += neorv32_rte_handler_install(id, global_trap_handler);
}
if (install_err) {
PRINT_CRITICAL("RTE fail!\n");
return 1;
}
// clear GPIOs (they are used by the TB to trigger external events)
neorv32_gpio_port_set(0);
// prepare counters
neorv32_cpu_csr_write(CSR_MCOUNTINHIBIT, 0); // enable counter auto increment (ALL counters)
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U)) {
neorv32_cpu_csr_write(CSR_MCOUNTEREN, -1); // allow counter access from user-mode code
}
// set CMP of machine system timer MTIME to max to prevent an IRQ
neorv32_mtime_set_timecmp(-1);
neorv32_mtime_set_time(0);
// get number of implemented PMP regions
pmp_num_regions = neorv32_cpu_pmp_get_num_regions();
// fancy intro
// -----------------------------------------------
neorv32_rte_print_logo(); // show NEORV32 ASCII logo
neorv32_rte_print_credits(); // show project credits
neorv32_rte_print_hw_config(); // show full hardware configuration report
// **********************************************************************************************
// Run CPU and SoC tests
// **********************************************************************************************
// tests intro
PRINT_STANDARD("\nStarting tests...\n\n");
// clear testbench IRQ triggers
sim_irq_trigger(0);
// clear all interrupts, enable only where needed
neorv32_cpu_csr_write(CSR_MIE, 0);
neorv32_cpu_csr_write(CSR_MIP, 0);
// enable machine-mode interrupts
neorv32_cpu_csr_set(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
// no traps so far
trap_cnt = 0;
// ----------------------------------------------------------
// Setup HPMs
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] HPM setup ", cnt_test);
num_hpm_cnts_global = neorv32_cpu_hpm_get_num_counters();
if (num_hpm_cnts_global != 0) {
cnt_test++;
neorv32_cpu_csr_write(CSR_MHPMCOUNTER3, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT3, 1 << HPMCNT_EVENT_COMPR);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER4, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT4, 1 << HPMCNT_EVENT_WAIT_DIS);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER5, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT5, 1 << HPMCNT_EVENT_WAIT_ALU);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER6, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT6, 1 << HPMCNT_EVENT_BRANCH);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER7, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT7, 1 << HPMCNT_EVENT_BRANCHED);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER8, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT8, 1 << HPMCNT_EVENT_LOAD);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER9, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT9, 1 << HPMCNT_EVENT_STORE);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER10, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT10, 1 << HPMCNT_EVENT_WAIT_LSU);
neorv32_cpu_csr_write(CSR_MHPMCOUNTER11, 0); neorv32_cpu_csr_write(CSR_MHPMEVENT11, 1 << HPMCNT_EVENT_TRAP);
// make sure there was no exception
if (neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
neorv32_cpu_csr_write(CSR_MCOUNTINHIBIT, 0); // enable all counters
// ----------------------------------------------------------
// Setup PMP for tests
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP setup ", cnt_test);
if (pmp_num_regions >= 3) { // sufficient regions for tests
// check if PMP is already locked
tmp_a = neorv32_cpu_csr_read(CSR_PMPCFG0);
tmp_b = ((1 << PMPCFG_L) << 0) | ((1 << PMPCFG_L) << 8) | ((1 << PMPCFG_L) << 16);
if (tmp_a & tmp_b) {
PRINT_CRITICAL("\nERROR! PMP LOCKED!\n");
return 1;
}
// check if NAPOT and TOR modes are supported
neorv32_cpu_csr_write(CSR_PMPCFG0, (PMP_TOR << PMPCFG_A_LSB)); // try to set mode "TOR"
if ((neorv32_cpu_csr_read(CSR_PMPCFG0) & 0xff) != (PMP_TOR << PMPCFG_A_LSB)) {
PRINT_CRITICAL("\nERROR! PMP TOR mode not supported!\n");
return 1;
}
neorv32_cpu_csr_write(CSR_PMPCFG0, (PMP_NAPOT << PMPCFG_A_LSB)); // try to set mode "NAPOT"
if ((neorv32_cpu_csr_read(CSR_PMPCFG0) & 0xff) != (PMP_NAPOT << PMPCFG_A_LSB)) {
PRINT_CRITICAL("\nERROR! PMP NAPOT mode not supported!\n");
return 1;
}
neorv32_cpu_csr_write(CSR_PMPCFG0, 0); // disable test entry again
cnt_test++;
// set execute permission for u-mode
// use entry 2 so we can use entries 0 & 1 later on for higher-prioritized configurations
tmp_a = neorv32_cpu_pmp_configure_region(2, -1, (PMP_NAPOT << PMPCFG_A_LSB) | (1 << PMPCFG_X));
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c) && (tmp_a == 0)) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test fence instructions
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FENCEs ", cnt_test);
cnt_test++;
asm volatile ("fence"); // flush/reload d-cache
asm volatile ("fence.i"); // clear instruction prefetch buffer and clear i-cache
asm volatile ("fence");
asm volatile ("fence.i");
if (neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c) {
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Test standard RISC-V counters
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Zicntr CNTs ", cnt_test);
cnt_test++;
// make sure counters are enabled
neorv32_cpu_csr_clr(CSR_MCOUNTINHIBIT, (1<<CSR_MCOUNTINHIBIT_CY) | (1<<CSR_MCOUNTINHIBIT_IR));
// prepare overflow
neorv32_cpu_set_mcycle( 0x00000000FFFFFFFFULL);
neorv32_cpu_set_minstret(0x00000001FFFFFFFFULL);
asm volatile ("nop");
// get current counter HIGH words
asm volatile ("rdcycleh %[rd]" : [rd] "=r" (tmp_a) : );
asm volatile ("rdinstreth %[rd]" : [rd] "=r" (tmp_b) : );
// make sure cycle counter high has incremented and there was no exception during access
if ((tmp_a == 1) && // cycle overflow
(tmp_b == 2) && // instret overflow
(neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c)) { // no exception
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Test mcounteren: constrain user-level access to counter CSRs
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] mcounteren CSR ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U)) {
cnt_test++;
// stop base counters
neorv32_cpu_csr_set(CSR_MCOUNTINHIBIT, 0b101);
// no access to counter CSRs
neorv32_cpu_csr_write(CSR_MCOUNTEREN, 0);
// read counter from user mode
neorv32_cpu_goto_user_mode();
{
asm volatile ("addi %[rd], zero, 123 \n" // this value must not change
"rdinstret %[rd]" : [rd] "=r" (tmp_a) : ); // has to trap
}
if ((tmp_a == 123) && ((neorv32_cpu_csr_read(CSR_MCOUNTEREN) & 7) == 0b000) &&
(neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL)) {
test_ok();
}
else {
test_fail();
}
// re-enable counters
neorv32_cpu_csr_write(CSR_MCOUNTEREN, -1);
neorv32_cpu_csr_set(CSR_MCOUNTINHIBIT, 0);
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test mcountinhibit: inhibit counter auto-inc
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] mcountinhibit CSR ", cnt_test);
cnt_test++;
// inhibit cycle and instret CSRs
neorv32_cpu_csr_set(CSR_MCOUNTINHIBIT, (1<<CSR_MCOUNTINHIBIT_CY) | (1<<CSR_MCOUNTINHIBIT_IR));
// get current counters
asm volatile ("rdcycle %[rd]" : [rd] "=r" (tmp_a) : );
asm volatile ("rdinstret %[rd]" : [rd] "=r" (tmp_b) : );
// wait some time to have a nice "increment" (there should be NO increment at all!)
asm volatile ("nop");
asm volatile ("nop");
// make sure counter have NOT incremented and there was no exception during access
if ((tmp_a == neorv32_cpu_csr_read(CSR_MCYCLE)) &&
(tmp_b == neorv32_cpu_csr_read(CSR_MINSTRET)) &&
((neorv32_cpu_csr_read(CSR_MCOUNTINHIBIT) & 0x7U) == ((1<<CSR_MCOUNTINHIBIT_CY) | (1<<CSR_MCOUNTINHIBIT_IR))) &&
(neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c)) {
test_ok();
}
else {
test_fail();
}
// re-enable all counters
neorv32_cpu_csr_write(CSR_MCOUNTINHIBIT, 0);
// ----------------------------------------------------------
// Execute MRET in U-mode (has to trap!)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] MRET in U-mode ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U)) {
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
asm volatile ("mret");
}
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// External memory interface test
// (and iCache block-/word-wise error check)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Ext. memory (@0x%x) ", cnt_test, (uint32_t)EXT_MEM_BASE);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_MEM_EXT)) {
cnt_test++;
// clear scratch CSR
neorv32_cpu_csr_write(CSR_MSCRATCH, 0);
// setup test program in external memory
neorv32_cpu_store_unsigned_word((uint32_t)EXT_MEM_BASE+0, 0x3407D073); // csrwi mscratch, 15 (32-bit)
neorv32_cpu_store_unsigned_word((uint32_t)EXT_MEM_BASE+4, 0x00008067); // ret (32-bit)
// execute program
asm volatile ("fence.i"); // flush i-cache
tmp_a = (uint32_t)EXT_MEM_BASE; // call the dummy sub program
asm volatile ("jalr ra, %[input_i]" : : [input_i] "r" (tmp_a));
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c) && // make sure there was no exception
(neorv32_cpu_csr_read(CSR_MSCRATCH) == 15)) { // make sure the program was executed in the right way
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Illegal CSR access
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Illegal CSR ", cnt_test);
cnt_test++;
// DSCRATCH0 is accessible in only debug mode
asm volatile ("addi %[rd], zero, 789 \n" // this value must not change
"csrr %[rd], %[csr]" : [rd] "=r" (tmp_a) : [csr] "i" (CSR_DSCRATCH0));
if ((tmp_a == 789) && (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL)) {
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Write-access to read-only CSR
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Read-only CSR ", cnt_test);
cnt_test++;
neorv32_cpu_csr_write(CSR_CYCLE, 0); // cycle CSR is read-only
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL) {
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// No "real" CSR write access (because rs1 = r0)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Read-only CSR 'no-write' ", cnt_test);
cnt_test++;
// cycle CSR is read-only, but no actual write is performed because rs1=r0
// -> should cause no exception
asm volatile ("csrrs zero, cycle, zero");
if (neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c) {
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Unaligned instruction address
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] IF align EXC ", cnt_test);
// skip if C-mode is implemented
if ((neorv32_cpu_csr_read(CSR_MISA) & (1<<CSR_MISA_C)) == 0) {
cnt_test++;
tmp_a = 0;
tmp_b = (uint32_t)ADDR_UNALIGNED_3;
asm volatile ("li %[link], 0x123 \n" // initialize link register with known value
"jalr %[link], 0(%[addr])" // must not update link register due to exception
: [link] "=r" (tmp_a) : [addr] "r" (tmp_b));
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_MISALIGNED) && (tmp_a == 0x123)) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Instruction access fault
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] IF access EXC ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_IS_SIM)) {
cnt_test++;
// put "ret" instruction to the beginning of the external memory module
neorv32_cpu_store_unsigned_word((uint32_t)EXT_MEM_BASE+0, 0x00008067); // exception handler hack will try to resume execution here
// jump to beginning of external memory minus 4 bytes
// this will cause an instruction access fault as there is no module responding to the fetch request
// the exception handler will try to resume at the instruction 4 bytes ahead, which is the "ret" we just created
asm volatile ("fence.i"); // flush i-cache
tmp_a = ((uint32_t)EXT_MEM_BASE) - 4;
asm volatile ("jalr ra, %[input_i]" : : [input_i] "r" (tmp_a));
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ACCESS) && // correct exception cause
((neorv32_cpu_csr_read(CSR_MEPC)-4) == tmp_a)) { // correct trap value (address of instruction that caused ifetch error)
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Illegal instruction
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Illegal instr. EXC ", cnt_test);
cnt_test++;
// disable machine-mode interrupts
neorv32_cpu_csr_clr(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
tmp_a = trap_cnt; // current number of traps
{
asm volatile (".align 4");
if (neorv32_cpu_csr_read(CSR_MISA) & (1<<CSR_MISA_C)) { // C extension enabled
asm volatile (".half 0x0000"); // canonical compressed illegal
asm volatile (".half 0x66aa"); // c.flwsp (illegal since F is not supported)
}
asm volatile (".word 0x0e00202f"); // amoswap.w x0, x0, (x0)
asm volatile (".word 0x34004073"); // illegal CSR access funct3 (using mscratch)
asm volatile (".word 0x30200077"); // mret with illegal opcode
asm volatile (".word 0x3020007f"); // mret with illegal opcode
asm volatile (".word 0x7b200073"); // dret outside of debug mode
asm volatile (".word 0x7b300073"); // illegal system funct12
asm volatile (".word 0xfe000033"); // illegal add funct7
asm volatile (".word 0x80002063"); // illegal branch funct3
asm volatile (".word 0x0000200f"); // illegal fence funct3
asm volatile (".word 0xfe002fe3"); // illegal store funct3
asm volatile (".align 4");
}
// number of traps we are expecting
if (neorv32_cpu_csr_read(CSR_MISA) & (1<<CSR_MISA_C)) { // C extension enabled
tmp_a += 12;
}
else { // C extension disabled
tmp_a += 10;
}
tmp_b = trap_cnt; // number of traps we have seen here
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL) && // illegal instruction exception
(neorv32_cpu_csr_read(CSR_MTINST) == 0xfe002fe3) && // instruction word of last illegal instruction
(tmp_a == tmp_b)) { // right amount of illegal instruction exceptions
test_ok();
}
else {
test_fail();
}
// re-enable machine-mode interrupts
neorv32_cpu_csr_set(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
// ----------------------------------------------------------
// Illegal compressed instruction
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Illegal C instr. EXC ", cnt_test);
// skip if C-mode is not implemented
if ((neorv32_cpu_csr_read(CSR_MISA) & (1<<CSR_MISA_C))) {
cnt_test++;
// illegal 16-bit instruction (official UNIMP instruction)
asm volatile (".align 2 \n"
".half 0x0001 \n" // NOP
".half 0x0000"); // UNIMP
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Breakpoint instruction
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] BREAK EXC ", cnt_test);
// skip on real hardware since ebreak will make problems when running this test program via gdb
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_IS_SIM)) {
cnt_test++;
asm volatile ("ebreak");
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_BREAKPOINT) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Unaligned load address
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] LD align EXC ", cnt_test);
cnt_test++;
// load from unaligned address
asm volatile ("li %[da], 0xcafe1230 \n" // initialize destination register with known value
"lw %[da], 0(%[ad]) " // must not update destination register to to exception
: [da] "=r" (tmp_b) : [ad] "r" (ADDR_UNALIGNED_1));
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_L_MISALIGNED) &&
(neorv32_cpu_csr_read(CSR_MTVAL) == ADDR_UNALIGNED_1) &&
(tmp_b == 0xcafe1230)) { // make sure dest. reg is not updated
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Load access fault
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] LD access EXC ", cnt_test);
cnt_test++;
// load from unreachable aligned address
asm volatile ("li %[da], 0xcafe1230 \n" // initialize destination register with known value
"lw %[da], 0(%[ad]) " // must not update destination register due to exception
: [da] "=r" (tmp_b) : [ad] "r" (ADDR_UNREACHABLE));
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_L_ACCESS) && // load bus access error exception
(neorv32_cpu_csr_read(CSR_MTVAL) == ADDR_UNREACHABLE) &&
(tmp_b == 0xcafe1230)) { // make sure dest. reg is not updated
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Unaligned store address
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] ST align EXC ", cnt_test);
cnt_test++;
// initialize test variable
store_access_addr[0] = 0x11223344;
store_access_addr[1] = 0x55667788;
tmp_a = (uint32_t)(&store_access_addr[0]);
tmp_a += 2; // make word-unaligned
// store to unaligned address
neorv32_cpu_store_unsigned_word(tmp_a, 0);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_S_MISALIGNED) &&
(neorv32_cpu_csr_read(CSR_MTVAL) == tmp_a) &&
(store_access_addr[0] == 0x11223344) &&
(store_access_addr[1] == 0x55667788)) { // make sure memory was not altered
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Store access fault
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] ST access EXC ", cnt_test);
cnt_test++;
// store to unreachable aligned address
neorv32_cpu_store_unsigned_word(ADDR_READONLY, 0);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_S_ACCESS) && // store bus access error exception
(neorv32_cpu_csr_read(CSR_MTVAL) == ADDR_READONLY)) {
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Environment call from M-mode
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] ENVCALL M EXC ", cnt_test);
cnt_test++;
// clear mstatus.mie and set mstatus.mpie
neorv32_cpu_csr_clr(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
neorv32_cpu_csr_set(CSR_MSTATUS, 1 << CSR_MSTATUS_MPIE);
asm volatile ("ecall");
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_MENV_CALL) &&
((neorv32_cpu_csr_read(CSR_MSTATUS) & (1 << CSR_MSTATUS_MIE)) == 0)) { // MIE should still be cleared
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Environment call from U-mode
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] ENVCALL U EXC ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U)) {
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
asm volatile ("ecall");
}
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_UENV_CALL) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Machine timer interrupt (MTIME)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] MTI IRQ ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_MTIME)) {
cnt_test++;
// configure MTIME (and check overflow from low word to high word)
neorv32_mtime_set_timecmp(0x0000000100000000ULL);
neorv32_mtime_set_time( 0x00000000FFFFFFFEULL);
// enable interrupt
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MTIE);
// wait some time for the IRQ to trigger and arrive the CPU
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_MTI) &&
(neorv32_cpu_csr_read(CSR_MTVAL) == 0) && // has to be zero for interrupts
(neorv32_cpu_csr_read(CSR_MTINST) == 0)) { // has to be zero for interrupts
test_ok();
}
else {
test_fail();
}
// no more MTIME interrupts
neorv32_mtime_set_timecmp(-1);
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Machine software interrupt (MSI) via testbench
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] MSI (sim) IRQ ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_IS_SIM)) {
cnt_test++;
// enable interrupt
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MSIE);
// trigger IRQ
sim_irq_trigger(1 << CSR_MIE_MSIE);
// wait some time for the IRQ to arrive the CPU
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
sim_irq_trigger(0);
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_MSI) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Machine external interrupt (MEI) via testbench
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] MEI (sim) IRQ ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_IS_SIM)) {
cnt_test++;
// enable interrupt
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MEIE);
// trigger IRQ
sim_irq_trigger(1 << CSR_MIE_MEIE);
// wait some time for the IRQ to arrive the CPU
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
sim_irq_trigger(0);
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_MEI) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Permanent IRQ (make sure interrupted program proceeds)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Permanent IRQ (MTI) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_MTIME)) {
cnt_test++;
// fire MTIME IRQ
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MTIE);
neorv32_mtime_set_timecmp(0); // force interrupt
int test_cnt = 0;
while(test_cnt < 3) {
test_cnt++;
}
neorv32_cpu_csr_write(CSR_MIE, 0);
if (test_cnt == 3) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test pending interrupt
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Pending IRQ (MTI) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_MTIME)) {
cnt_test++;
// disable all interrupts
neorv32_cpu_csr_write(CSR_MIE, 0);
// fire MTIME IRQ
neorv32_mtime_set_timecmp(0); // force interrupt
// wait some time for the IRQ to arrive the CPU
asm volatile ("nop");
asm volatile ("nop");
uint32_t was_pending = neorv32_cpu_csr_read(CSR_MIP) & (1 << CSR_MIP_MTIP); // should be pending now
// clear pending MTI
neorv32_mtime_set_timecmp(-1);
uint32_t is_pending = neorv32_cpu_csr_read(CSR_MIP) & (1 << CSR_MIP_MTIP); // should NOT be pending anymore
if ((was_pending != 0) && (is_pending == 0)) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test vectored interrupt via testbench external interrupt
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Vectored IRQ (sim) ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_IS_SIM)) {
cnt_test++;
// back-up RTE
uint32_t mtvec_bak = neorv32_cpu_csr_read(CSR_MTVEC);
// install vector table and enable vector mode (mtvec[1:0] = 0b01)
neorv32_cpu_csr_write(CSR_MTVEC, (uint32_t)&vectored_irq_table | 0x1);
// enable interrupt
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MEIE);
// trigger IRQ
sim_irq_trigger(1 << CSR_MIE_MEIE);
// wait some time for the IRQ to arrive the CPU
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
sim_irq_trigger(0);
if (vectored_mei_handler_ack == 1) {
test_ok();
}
else {
test_fail();
}
// restore RTE
neorv32_cpu_csr_write(CSR_MTVEC, mtvec_bak);
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 0 (WDT)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ0 (WDT) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_WDT)) {
cnt_test++;
// enable fast interrupt
neorv32_cpu_irq_enable(WDT_FIRQ_ENABLE);
// configure WDT:
// timeout = 1*4096 cycles, no lock, disable in debug mode, enable in sleep mode, enable strict reset mode
neorv32_wdt_setup(1, 0, 0, 1, 1);
// sleep until interrupt
asm volatile ("wfi");
neorv32_cpu_csr_write(CSR_MIE, 0);
NEORV32_WDT->CTRL = 0;
if (neorv32_cpu_csr_read(CSR_MCAUSE) == WDT_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 1 (CFS)
// ----------------------------------------------------------
PRINT_STANDARD("[%i] FIRQ1 (CFS) ", cnt_test);
PRINT_STANDARD("[n.a.]\n");
// ----------------------------------------------------------
// Fast interrupt channel 2 (UART0.RX)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ2 (UART0.RX) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_UART0)) {
cnt_test++;
// wait for UART to finish transmitting
while(neorv32_uart0_tx_busy());
// backup current UART configuration
tmp_a = NEORV32_UART0->CTRL;
// enable IRQ if RX FIFO not empty
neorv32_uart0_setup(BAUD_RATE, 1 << UART_CTRL_IRQ_RX_NEMPTY);
// make sure sim mode is disabled
NEORV32_UART0->CTRL &= ~(1 << UART_CTRL_SIM_MODE);
// enable fast interrupt
neorv32_cpu_irq_enable(UART0_RX_FIRQ_ENABLE);
neorv32_uart0_putc(0);
while(neorv32_uart0_tx_busy());
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
// restore original configuration
NEORV32_UART0->CTRL = tmp_a;
if (neorv32_cpu_csr_read(CSR_MCAUSE) == UART0_RX_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 3 (UART0.TX)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ3 (UART0.TX) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_UART0)) {
cnt_test++;
// wait for UART to finish transmitting
while(neorv32_uart0_tx_busy());
// backup current UART configuration
tmp_a = NEORV32_UART0->CTRL;
// enable IRQ if TX FIFO empty
neorv32_uart0_setup(BAUD_RATE, 1 << UART_CTRL_IRQ_TX_EMPTY);
// make sure sim mode is disabled
NEORV32_UART0->CTRL &= ~(1 << UART_CTRL_SIM_MODE);
neorv32_uart0_putc(0);
while(neorv32_uart0_tx_busy());
// UART0 TX interrupt enable
neorv32_cpu_irq_enable(UART0_TX_FIRQ_ENABLE);
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
// restore original configuration
NEORV32_UART0->CTRL = tmp_a;
if (neorv32_cpu_csr_read(CSR_MCAUSE) == UART0_TX_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 4 (UART1.RX)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ4 (UART1.RX) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_UART1)) {
cnt_test++;
// backup current UART1 configuration
tmp_a = NEORV32_UART1->CTRL;
// enable IRQ if RX FIFO not empty
neorv32_uart1_setup(BAUD_RATE, 1 << UART_CTRL_IRQ_RX_NEMPTY);
// make sure sim mode is disabled
NEORV32_UART1->CTRL &= ~(1 << UART_CTRL_SIM_MODE);
// UART1 RX interrupt enable
neorv32_cpu_irq_enable(UART1_RX_FIRQ_ENABLE);
neorv32_uart1_putc(0);
while(neorv32_uart1_tx_busy());
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
// restore original configuration
NEORV32_UART1->CTRL = tmp_a;
if (neorv32_cpu_csr_read(CSR_MCAUSE) == UART1_RX_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 5 (UART1.TX)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ5 (UART1.TX) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_UART1)) {
cnt_test++;
// backup current UART1 configuration
tmp_a = NEORV32_UART1->CTRL;
// enable IRQ if TX FIFO empty
neorv32_uart1_setup(BAUD_RATE, 1 << UART_CTRL_IRQ_TX_EMPTY);
// make sure sim mode is disabled
NEORV32_UART1->CTRL &= ~(1 << UART_CTRL_SIM_MODE);
neorv32_uart1_putc(0);
while(neorv32_uart1_tx_busy());
// UART0 TX interrupt enable
neorv32_cpu_irq_enable(UART1_TX_FIRQ_ENABLE);
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
// restore original configuration
NEORV32_UART1->CTRL = tmp_a;
if (neorv32_cpu_csr_read(CSR_MCAUSE) == UART1_TX_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 6 (SPI)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ6 (SPI) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_SPI)) {
cnt_test++;
// configure SPI
neorv32_spi_setup(CLK_PRSC_8, 0, 0, 0, 1<<SPI_CTRL_IRQ_RX_AVAIL); // IRQ when RX FIFO is not empty
// enable fast interrupt
neorv32_cpu_irq_enable(SPI_FIRQ_ENABLE);
// trigger SPI IRQ
neorv32_spi_trans(0); // blocking
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if (neorv32_cpu_csr_read(CSR_MCAUSE) == SPI_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 7 (TWI)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ7 (TWI) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_TWI)) {
cnt_test++;
// configure TWI, fastest clock, no clock stretching
neorv32_twi_setup(CLK_PRSC_2, 0, 0);
// enable TWI FIRQ
neorv32_cpu_irq_enable(TWI_FIRQ_ENABLE);
// trigger TWI IRQ
neorv32_twi_start_trans(0xA5);
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TWI_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 8 (XIRQ)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ8 (XIRQ) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_XIRQ)) {
cnt_test++;
int xirq_err_cnt = 0;
xirq_trap_handler_ack = 0;
xirq_err_cnt += neorv32_xirq_setup(); // initialize XIRQ
xirq_err_cnt += neorv32_xirq_install(0, xirq_trap_handler0); // install XIRQ IRQ handler channel 0
xirq_err_cnt += neorv32_xirq_install(1, xirq_trap_handler1); // install XIRQ IRQ handler channel 1
// enable XIRQ FIRQ
neorv32_cpu_irq_enable(XIRQ_FIRQ_ENABLE);
// trigger XIRQ channel 1 and 0
neorv32_gpio_port_set(3);
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == XIRQ_TRAP_CODE) && // FIRQ8 IRQ
(xirq_err_cnt == 0) && // no errors during XIRQ configuration
(xirq_trap_handler_ack == 4)) { // XIRQ channel handler 0 executed before handler 1
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 9 (NEOLED)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ9 (NEOLED) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_NEOLED)) {
cnt_test++;
// enable fast interrupt
neorv32_cpu_irq_enable(NEOLED_FIRQ_ENABLE);
// configure NEOLED, IRQ if FIFO empty
neorv32_neoled_setup(CLK_PRSC_4, 0, 0, 0, 0);
// send dummy data
neorv32_neoled_write_nonblocking(0);
neorv32_neoled_write_nonblocking(0);
// sleep until interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if (neorv32_cpu_csr_read(CSR_MCAUSE) == NEOLED_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 10 (DMA) + CRC
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ10 (DMA) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_DMA)) {
cnt_test++;
// enable DMA, auto-fencing and according FIRQ channel
neorv32_dma_enable();
neorv32_dma_fence_enable();
neorv32_cpu_irq_enable(DMA_FIRQ_ENABLE);
// setup source data
dma_src = 0x7788ee11;
// setup CRC unit
neorv32_crc_setup(CRC_MODE32, 0x4C11DB7, 0xFFFFFFFF);
// configure and trigger DMA transfer
tmp_a = DMA_CMD_B2UW | DMA_CMD_SRC_INC | DMA_CMD_DST_CONST | DMA_CMD_ENDIAN;
neorv32_dma_transfer((uint32_t)(&dma_src), (uint32_t)(&NEORV32_CRC->DATA), 4, tmp_a);
// sleep until interrupt
asm volatile ("wfi");
neorv32_cpu_csr_write(CSR_MIE, 0);
// flush/reload d-cache
asm volatile ("fence");
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == DMA_TRAP_CODE) && // correct interrupt source
(neorv32_crc_get() == 0x31DC476E) && // correct CRC sum
(neorv32_dma_done() != 0) && // DMA has actually attempted a transfer
(neorv32_dma_status() == DMA_STATUS_IDLE)) { // DMA back in idle mode without errors
test_ok();
}
else {
test_fail();
}
// disable DMA
neorv32_dma_disable();
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 11 (SDI)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ11 (SDI) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_SDI)) {
cnt_test++;
// configure and enable SDI + SPI
neorv32_sdi_setup(1 << SDI_CTRL_IRQ_RX_AVAIL);
neorv32_spi_setup(CLK_PRSC_4, 0, 0, 0, 0);
// enable fast interrupt
neorv32_cpu_irq_enable(SDI_FIRQ_ENABLE);
// write test data to SDI
neorv32_sdi_rx_clear();
neorv32_sdi_put(0xab);
// trigger SDI IRQ by sending data via SPI
neorv32_spi_cs_en(7); // select SDI
tmp_a = neorv32_spi_trans(0x83);
neorv32_spi_cs_dis();
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == SDI_TRAP_CODE) && // correct trap code
(neorv32_sdi_get_nonblocking() == 0x83) && // correct SDI read data
((tmp_a & 0xff) == 0xab)) { // correct SPI read data
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 12 (GPTMR)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ12 (GPTMR) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_GPTMR)) {
cnt_test++;
// enable GPTMR FIRQ
neorv32_cpu_irq_enable(GPTMR_FIRQ_ENABLE);
// match-interrupt after CLK_PRSC_2*THRESHOLD = 2*2 = 8 clock cycles
neorv32_gptmr_setup(CLK_PRSC_2, 2, 1);
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == GPTMR_TRAP_CODE) && // correct interrupt?
(neorv32_gptmr_trigger_matched() == 1) && // IRQ caused by timer match?
(neorv32_gptmr_trigger_captured() == 0)) { // no capture trigger?
test_ok();
}
else {
test_fail();
}
// disable GPTMR
neorv32_gptmr_disable();
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 13 (ONEWIRE)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ13 (ONEWIRE) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_ONEWIRE)) {
cnt_test++;
// enable ONEWIRE FIRQ
neorv32_cpu_irq_enable(ONEWIRE_FIRQ_ENABLE);
// configure interface for minimal timing
neorv32_onewire_setup(200); // t_base = 200ns
// read single bit from bus
neorv32_onewire_read_bit_blocking();
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
// check if IRQ
if (neorv32_cpu_csr_read(CSR_MCAUSE) == ONEWIRE_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 14 (SLINK)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ14 (SLINK) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_SLINK)) {
cnt_test++;
// enable SLINK FIRQ
neorv32_cpu_irq_enable(SLINK_FIRQ_ENABLE);
// configure RX data available interrupt
neorv32_slink_setup(1 << SLINK_CTRL_IRQ_RX_NEMPTY);
// send data word and mark as end-of-stream
neorv32_slink_put_last(0xAABBCCDD);
// wait for interrupt
asm volatile ("nop");
asm volatile ("nop");
neorv32_cpu_csr_write(CSR_MIE, 0);
// check if IRQ
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == SLINK_TRAP_CODE) && // correct trap code
(neorv32_slink_get() == 0xAABBCCDD) && // correct RX data
(neorv32_slink_check_last() != 0)) { // is marked as "end of stream"
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Fast interrupt channel 15 (TRNG)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] FIRQ15 (TRNG) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_TRNG)) {
cnt_test++;
// enable TRNG FIRQ
neorv32_cpu_irq_enable(TRNG_FIRQ_ENABLE);
// configure interface
NEORV32_TRNG->CTRL = (1 << TRNG_CTRL_EN) |
(1 << TRNG_CTRL_IRQ_FIFO_FULL); // IRQ if FIFO is full
// sleep until interrupt
asm volatile ("wfi");
neorv32_cpu_csr_write(CSR_MIE, 0);
// check if IRQ
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRNG_TRAP_CODE) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// RTE context modification
// implemented as "system service call"
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] RTE context ", cnt_test);
cnt_test++;
// install ecall service handler
neorv32_rte_handler_install(RTE_TRAP_MENV_CALL, rte_service_handler);
neorv32_rte_handler_install(RTE_TRAP_UENV_CALL, rte_service_handler);
// make sure all arguments are passed via specific register
register uint32_t syscall_a0 asm ("a0");
register uint32_t syscall_a1 asm ("a1");
register uint32_t syscall_a2 asm ("a2");
uint32_t syscall_res = 0;
// try to execute service call in user mode
// hart will be back in MACHINE mode when trap handler returns
neorv32_cpu_goto_user_mode();
{
syscall_a0 = 127;
syscall_a1 = 12000;
syscall_a2 = 628;
asm volatile ("ecall" : "=r" (syscall_a0) : "r" (syscall_a0), "r" (syscall_a1), "r" (syscall_a2));
syscall_res = syscall_a0; // backup result before a0 is used for something else
}
// restore initial trap handlers
neorv32_rte_handler_install(RTE_TRAP_MENV_CALL, global_trap_handler);
neorv32_rte_handler_install(RTE_TRAP_UENV_CALL, global_trap_handler);
if (((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_MENV_CALL) ||
(neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_UENV_CALL)) &&
(syscall_res == 12628)) { // correct "service" result
test_ok();
}
else {
test_fail();
}
// ----------------------------------------------------------
// Test WFI ("sleep") instruction (executed in user mode), wakeup via MTIME
// mstatus.mie is cleared before to check if machine-mode IRQ still trigger in user-mode
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] User-mode WFI (wake-up via MTI) ", cnt_test);
if ((NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_MTIME)) &&
(neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U))) {
cnt_test++;
// program wake-up timer
neorv32_mtime_set_timecmp(neorv32_mtime_get_time() + 300);
// enable mtime interrupt
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MTIE);
// clear mstatus.TW to allow execution of WFI also in user-mode
// clear mstatus.MIE and mstatus.MPIE to check if IRQ can still trigger in User-mode
neorv32_cpu_csr_clr(CSR_MSTATUS, (1<<CSR_MSTATUS_TW) | (1<<CSR_MSTATUS_MIE) | (1<<CSR_MSTATUS_MPIE));
// put CPU into sleep mode (from user mode)
neorv32_cpu_goto_user_mode();
{
asm volatile ("wfi");
}
neorv32_cpu_csr_write(CSR_MIE, 0);
if (neorv32_cpu_csr_read(CSR_MCAUSE) != TRAP_CODE_MTI) {
test_fail();
}
else {
test_ok();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test if CPU wakes-up from WFI if m-mode interrupts are disabled globally
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] WFI (wakeup on pending MTI) ", cnt_test);
if (NEORV32_SYSINFO->SOC & (1 << SYSINFO_SOC_IO_MTIME)) {
cnt_test++;
// disable m-mode interrupts globally
neorv32_cpu_csr_clr(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
// program wake-up timer
neorv32_mtime_set_timecmp(neorv32_mtime_get_time() + 300);
// enable mtime interrupt
neorv32_cpu_csr_write(CSR_MIE, 1 << CSR_MIE_MTIE);
// put CPU into sleep mode -the CPU has to wakeup again if any enabled interrupt source
// becomes pending - even if we are in m-mode and mstatus.mie is cleared
asm volatile ("wfi");
neorv32_cpu_csr_write(CSR_MIE, 0);
neorv32_cpu_csr_set(CSR_MSTATUS, 1 << CSR_MSTATUS_MIE);
if (neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test un-allowed WFI ("sleep") instruction (executed in user mode)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] WFI (not allowed in u-mode) ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U)) {
cnt_test++;
// set mstatus.TW to disallow execution of WFI in user-mode
neorv32_cpu_csr_set(CSR_MSTATUS, 1 << CSR_MSTATUS_TW);
// put CPU into sleep mode (from user mode)
neorv32_cpu_goto_user_mode();
{
asm volatile ("wfi"); // this has to fail
}
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test invalid CSR access in user mode
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Invalid CSR access from U-mode ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_U)) {
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
// access to misa not allowed for user-level programs
asm volatile ("addi %[rd], zero, 234 \n" // this value must not change
"csrr %[rd], misa " : [rd] "=r" (tmp_a) : ); // has to fail
}
if ((tmp_a == 234) && (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ILLEGAL)) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test trigger module (hardware breakpoint)
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] Trigger module (HW breakpoint) ", cnt_test);
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_SDTRIG)) {
cnt_test++;
// back-up RTE
uint32_t rte_bak = neorv32_cpu_csr_read(CSR_MTVEC);
// install hardware-breakpoint handler
neorv32_cpu_csr_write(CSR_MTVEC, (uint32_t)&hw_breakpoint_handler);
// setup test registers
neorv32_cpu_csr_write(CSR_MSCRATCH, 0);
hw_brk_mscratch_ok = 0;
// setup hardware breakpoint
neorv32_cpu_csr_write(CSR_TDATA2, (uint32_t)(&trigger_module_dummy)); // triggering address
neorv32_cpu_csr_write(CSR_TDATA1, (1 << 2) | // exe = 1: enable trigger module execution
(0 << 12)); // action = 0: breakpoint exception, do not enter debug-mode
// call the hw-breakpoint triggering function
trigger_module_dummy();
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_BREAKPOINT) && // correct exception cause
(neorv32_cpu_csr_read(CSR_MSCRATCH) == 4) && // breakpoint-triggering function was finally executed
(neorv32_cpu_csr_read(CSR_MEPC) == neorv32_cpu_csr_read(CSR_TDATA2)) && // mepc has to be set to the triggering instruction address
(neorv32_cpu_csr_read(CSR_TDATA1) & (1 << 22)) && // trigger has fired
(hw_brk_mscratch_ok == 1)) { // make sure mepc was correct in trap handler
test_ok();
}
else {
test_fail();
}
// shut-down and reset trigger
neorv32_cpu_csr_write(CSR_TDATA1, 0);
// restore RTE
neorv32_cpu_csr_write(CSR_MTVEC, rte_bak);
}
else {
PRINT_STANDARD("[n.a.]\n");
}
// ----------------------------------------------------------
// Test atomic lr/sc memory access - failing access
// ----------------------------------------------------------
#if defined __riscv_atomic
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] AMO LR/SC (", cnt_test);
PRINT_STANDARD("failing) ");
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_A)) {
cnt_test++;
// [NOTE] LR/SC operations bypass the data cache so we need to flush/reload
// it before/after making "normal" load/store operations
neorv32_cpu_invalidate_reservations(); // invalidate all current reservations
amo_var = 0x00cafe00; // initialize
tmp_a = neorv32_cpu_load_reservate_word((uint32_t)&amo_var);
amo_var = 0x10cafe00; // break reservation
asm volatile ("fence"); // flush/reload d-cache
tmp_b = neorv32_cpu_store_conditional_word((uint32_t)&amo_var, 0xaaaaaaaa);
tmp_b = (tmp_b << 1) | neorv32_cpu_store_conditional_word((uint32_t)&amo_var, 0xcccccccc); // another SC: must fail
tmp_b = (tmp_b << 1) | neorv32_cpu_store_conditional_word((uint32_t)ADDR_UNREACHABLE, 0); // another SC: must fail; no bus exception!
asm volatile ("fence"); // flush/reload d-cache
if ((tmp_a == 0x00cafe00) && // correct LR.W result
(amo_var == 0x10cafe00) && // atomic variable NOT updates by SC.W
(tmp_b == 0x00000007) && // SC.W[2] failed, SC.W[1] failed, SC.W[0] failed
(neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c)) { // no exception
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
#endif
// ----------------------------------------------------------
// Test atomic lr/sc memory access - succeeding access
// ----------------------------------------------------------
#if defined __riscv_atomic
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] AMO LR/SC (", cnt_test);
PRINT_STANDARD("succeed) ");
if (neorv32_cpu_csr_read(CSR_MISA) & (1 << CSR_MISA_A)) {
cnt_test++;
// [NOTE] LR/SC operations bypass the data cache so we need to flush/reload
// it before/after making "normal" load/store operations
neorv32_cpu_invalidate_reservations(); // invalidate all current reservations
amo_var = 0x00abba00; // initialize
tmp_a = neorv32_cpu_load_reservate_word((uint32_t)&amo_var);
asm volatile ("fence"); // flush/reload d-cache
neorv32_cpu_load_unsigned_word((uint32_t)&amo_var); // dummy read, must not alter reservation set state
tmp_b = neorv32_cpu_store_conditional_word((uint32_t)&amo_var, 0xcccccccc);
tmp_b = (tmp_b << 1) | neorv32_cpu_store_conditional_word((uint32_t)&amo_var, 0xcccccccc); // another SC: must fail
tmp_b = (tmp_b << 1) | neorv32_cpu_store_conditional_word((uint32_t)ADDR_UNREACHABLE, 0); // another SC: must fail; no bus exception!
asm volatile ("fence"); // flush/reload d-cache
if ((tmp_a == 0x00abba00) && // correct LR.W result
(amo_var == 0xcccccccc) && // atomic variable WAS updates by SC.W
(tmp_b == 0x00000003) && // SC.W[2] succeeded, SC.W[1] failed, SC.W[0] failed
(neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c)) { // no exception
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[n.a.]\n");
}
#endif
// ----------------------------------------------------------
// Test physical memory protection
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
// check if PMP is implemented
if (pmp_num_regions >= 3) {
// initialize protected variable
pmp_access[0] = 0x00000013; // nop (32-bit)
pmp_access[1] = 0x00008067; // ret (32-bit)
// General memory access from user mode - has to
// fail as u-mode has no permissions by default
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP U-mode read (denied) ", cnt_test);
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
asm volatile ("addi %[rd], zero, 0 \n"
"lw %[rd], 0(%[rs])" : [rd] "=r" (tmp_a) : [rs] "r" ((uint32_t)(&pmp_access[0])) );
}
if ((tmp_a == 0) && (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_L_ACCESS)) {
test_ok();
}
else {
test_fail();
}
// Create PMP protected region
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP config ", cnt_test);
cnt_test++;
tmp_a = (uint32_t)(&pmp_access[0]); // base address of protected region
// configure new region (with highest priority)
PRINT_STANDARD("[0]: OFF @ 0x%x, ", tmp_a); // base
tmp_b = neorv32_cpu_pmp_configure_region(0, tmp_a >> 2, 0);
PRINT_STANDARD("[1]: TOR (!L,!X,!W,R) @ 0x%x ", tmp_a+4); // bound
tmp_b += neorv32_cpu_pmp_configure_region(1, (tmp_a+4) >> 2, (PMP_TOR << PMPCFG_A_LSB) | (1 << PMPCFG_R)); // read-only
if ((tmp_b == 0) && (neorv32_cpu_csr_read(CSR_MCAUSE) == mcause_never_c)) {
test_ok();
}
else {
test_fail();
}
// LOAD from U-mode: should succeed
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP U-mode R (granted) ", cnt_test);
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
asm volatile ("addi %[rd], zero, 0 \n"
"lw %[rd], 0(%[rs])" : [rd] "=r" (tmp_b) : [rs] "r" ((uint32_t)(&pmp_access[0])) );
}
asm volatile ("ecall"); // go back to m-mode
if (tmp_b == 0x00000013) {
test_ok();
}
else {
test_fail();
}
// STORE from U-mode: should fail
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP U-mode W (denied) ", cnt_test);
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
neorv32_cpu_store_unsigned_word((uint32_t)(&pmp_access[0]), 0); // store access -> should fail
}
if ((pmp_access[0] == 0x00000013) && (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_S_ACCESS)) {
test_ok();
}
else {
test_fail();
}
// EXECUTE from U-mode: should fail
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP U-mode X (denied) ", cnt_test);
cnt_test++;
// switch to user mode (hart will be back in MACHINE mode when trap handler returns)
neorv32_cpu_goto_user_mode();
{
asm volatile ("jalr ra, %[rs]" : : [rs] "r" ((uint32_t)(&pmp_access[0])));
}
if (neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_I_ACCESS) {
test_ok();
}
else {
test_fail();
}
// STORE from M mode using U mode permissions: should fail
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP M-mode (U-mode perm.) W (denied) ", cnt_test);
cnt_test++;
// make M-mode load/store accesses use U-mode rights
neorv32_cpu_csr_set(CSR_MSTATUS, 1 << CSR_MSTATUS_MPRV); // set MPRV: M uses U permissions for load/stores
neorv32_cpu_csr_clr(CSR_MSTATUS, 3 << CSR_MSTATUS_MPP_L); // clear MPP: use U as effective privilege mode
neorv32_cpu_store_unsigned_word((uint32_t)(&pmp_access[0]), 0); // store access -> should fail
neorv32_cpu_csr_clr(CSR_MSTATUS, 1 << CSR_MSTATUS_MPRV);
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_S_ACCESS) && (pmp_access[0] == 0x00000013)) {
test_ok();
}
else {
test_fail();
}
// STORE from M mode with LOCKED: should fail
// ---------------------------------------------
neorv32_cpu_csr_write(CSR_MCAUSE, mcause_never_c);
PRINT_STANDARD("[%i] PMP M-mode (LOCKED) W (denied) ", cnt_test);
cnt_test++;
// set lock bit
neorv32_cpu_csr_set(CSR_PMPCFG0, (1 << PMPCFG_L) << 8); // set lock bit in entry 1
neorv32_cpu_store_unsigned_word((uint32_t)(&pmp_access[0]), 0); // store access -> should fail
if ((neorv32_cpu_csr_read(CSR_MCAUSE) == TRAP_CODE_S_ACCESS) && (pmp_access[0] == 0x00000013)) {
test_ok();
}
else {
test_fail();
}
}
else {
PRINT_STANDARD("[%i] PMP [n.a.]\n", cnt_test);
}
// ----------------------------------------------------------
// HPM reports
// ----------------------------------------------------------
neorv32_cpu_csr_write(CSR_MCOUNTINHIBIT, -1); // stop all HPM counters
if (neorv32_cpu_csr_read(CSR_MXISA) & (1 << CSR_MXISA_ZIHPM)) {
PRINT_STANDARD(
"\n\nHPMs:\n"
"#00 clock cycles : %u\n"
"#02 instructions : %u\n"
"#03 compr. instr. : %u\n"
"#04 DISP waits : %u\n"
"#05 ALU waits : %u\n"
"#06 branch instr. : %u\n"
"#07 ctrl flow tr. : %u\n"
"#08 MEM loads : %u\n"
"#09 MEM stores : %u\n"
"#10 MEM waits : %u\n"
"#11 traps : %u\n",
neorv32_cpu_csr_read(CSR_CYCLE),
neorv32_cpu_csr_read(CSR_INSTRET),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER3),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER4),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER5),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER6),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER7),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER8),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER9),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER10),
neorv32_cpu_csr_read(CSR_MHPMCOUNTER11)
);
}
// ----------------------------------------------------------
// Final test reports
// ----------------------------------------------------------
PRINT_CRITICAL("\n\nTest results:\nPASS: %i/%i\nFAIL: %i/%i\n\n", cnt_ok, cnt_test, cnt_fail, cnt_test);
// final result
if (cnt_fail == 0) {
PRINT_STANDARD("%c[1m[PROCESSOR TEST COMPLETED SUCCESSFULLY!]%c[0m\n", 27, 27);
}
else {
PRINT_STANDARD("%c[1m[PROCESSOR TEST FAILED!]%c[0m\n", 27, 27);
}
// make sure sim mode is disabled and UARTs are actually enabled
NEORV32_UART0->CTRL |= (1 << UART_CTRL_EN);
NEORV32_UART0->CTRL &= ~(1 << UART_CTRL_SIM_MODE);
NEORV32_UART1->CTRL = NEORV32_UART0->CTRL;
// minimal result report
PRINT_CRITICAL("%u/%u\n", (uint32_t)cnt_fail, (uint32_t)cnt_test);
return 0;
}
/**********************************************************************//**
* Simulation-based function to set/clear CPU interrupts (MSI, MEI).
*
* @param[in] sel IRQ select mask (bit positions according to #NEORV32_CSR_MIE_enum).
**************************************************************************/
void sim_irq_trigger(uint32_t sel) {
*((volatile uint32_t*) (0xFF000000)) = sel;
}
/**********************************************************************//**
* Trap handler for ALL exceptions/interrupts.
**************************************************************************/
void global_trap_handler(void) {
uint32_t cause = neorv32_cpu_csr_read(CSR_MCAUSE);
// clear pending FIRQ
if (cause & (1<<31)) {
neorv32_cpu_csr_write(CSR_MIP, ~(1 << (cause & 0xf)));
}
// hack: make "instruction access fault" exception resumable as we *exactly* know how to handle it in this case
if (cause == TRAP_CODE_I_ACCESS) {
neorv32_cpu_csr_write(CSR_MEPC, (uint32_t)EXT_MEM_BASE+0);
}
// increment global trap counter
trap_cnt++;
// hack: always come back in MACHINE MODE
neorv32_cpu_csr_set(CSR_MSTATUS, (1<<CSR_MSTATUS_MPP_H) | (1<<CSR_MSTATUS_MPP_L));
}
/**********************************************************************//**
* RTE's ecall "system service handler"; modifies application context to provide "system services"
**************************************************************************/
void rte_service_handler(void) {
// get service arguments
uint32_t arg0 = neorv32_rte_context_get(10); // a0
uint32_t arg1 = neorv32_rte_context_get(11); // a1
uint32_t arg2 = neorv32_rte_context_get(12); // a2
// valid service?
if (arg0 == 127) {
neorv32_rte_context_put(10, arg1 + arg2); // service result in a0
}
// hack: return in MACHINE MODE
neorv32_cpu_csr_set(CSR_MSTATUS, (1<<CSR_MSTATUS_MPP_H) | (1<<CSR_MSTATUS_MPP_L));
}
/**********************************************************************//**
* Vectored mtvec mode jump table.
**************************************************************************/
void vectored_irq_table(void) {
asm volatile(
".org vectored_irq_table + 0*4 \n"
"jal zero, %[glb] \n" // 0
".org vectored_irq_table + 3*4 \n"
"jal zero, %[glb] \n" // 3
".org vectored_irq_table + 7*4 \n"
"jal zero, %[glb] \n" // 7
".org vectored_irq_table + 11*4 \n"
"jal zero, %[mei] \n" // 11
".org vectored_irq_table + 16*4 \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] \n"
"jal zero, %[glb] "
: : [glb] "i" ((uint32_t)&vectored_global_handler), [mei] "i" ((uint32_t)&vectored_mei_handler)
);
}
/**********************************************************************//**
* Vectored trap handler for ALL exceptions/interrupts.
**************************************************************************/
void vectored_global_handler(void) {
// Call the default trap handler, cannot be put into the vector table directly
// as all function in the table must have the gcc attribute "interrupt".
global_trap_handler();
}
/**********************************************************************//**
* Machine external interrupt handler.
**************************************************************************/
void vectored_mei_handler(void) {
vectored_mei_handler_ack = 1; // successfully called
}
/**********************************************************************//**
* Hardware-breakpoint trap handler
**************************************************************************/
void __attribute__ ((interrupt)) hw_breakpoint_handler(void) {
// make sure mscratch has not been updated yet
if (neorv32_cpu_csr_read(CSR_MSCRATCH) == 0) {
hw_brk_mscratch_ok += 1;
}
// [NOTE] do not update MEPC here as hardware-breakpoint exceptions will set
// MEPC to the address of the instruction thats has NOT BEEN EXECUTED yet
}
/**********************************************************************//**
* Test function for the trigger module
**************************************************************************/
void __attribute__ ((noinline,naked)) trigger_module_dummy(void) {
asm volatile ("csrwi mscratch, 4 \n" // hardware breakpoint should trigger before executing this
"ret \n");
}
/**********************************************************************//**
* XIRQ handler channel 0.
**************************************************************************/
void xirq_trap_handler0(void) {
xirq_trap_handler_ack += 2;
}
/**********************************************************************//**
* XIRQ handler channel 1.
**************************************************************************/
void xirq_trap_handler1(void) {
xirq_trap_handler_ack *= 2;
}
/**********************************************************************//**
* Test results helper function: Shows "[ok]" and increments global cnt_ok
**************************************************************************/
void test_ok(void) {
PRINT_STANDARD("%c[1m[ok]%c[0m\n", 27, 27);
cnt_ok++;
}
/**********************************************************************//**
* Test results helper function: Shows "[FAIL]" and increments global cnt_fail
**************************************************************************/
void test_fail(void) {
PRINT_CRITICAL("%c[1m[fail(%u)]%c[0m\n", 27, cnt_test-1, 27);
cnt_fail++;
}
Reference in New Issue View Git Blame Copy Permalink