neorv32/CHANGELOG.md

126 KiB
Raw Blame History

Project Change Log

release commits-since-latest-release

This project uses semantic versioning. The version identifier uses an additional custom element (MAJOR.MINOR.PATCH.custom) to track individual changes. The identifier is incremented by every core hardware modification and also by major software/project changes.

The version identifier is globally defined by the hw_version_c constant in the main VHDL package file. Software can determine this version by reading the RISC-V-compatible mimpid CSR, which uses a 8x4-bit BCD (binary-coded decimal) representation. Example:

mimpid = 0x01040312 -> Version 01.04.03.12 -> v1.4.3.12

Version History

  • 🐛 bug-fix
  • new feature
  • 🧪 new experimental feature
  • ⚠️ changes that might impact compatibility with previous versions
  • 🔒 security/safety-related
  • 🚀 official release
  • Date format is "dd.mm.yyyy"
Date Version Comment Link
23.02.2024 1.9.5.8 optimize FIFO component to improve technology mapping (inferring blockRAM for "async read" configuration); 🐛 fix SLINK status flag delay #828
23.02.2024 1.9.5.7 fix FIFO synthesis issue (Vivado cannot infer block RAM nor LUT-RAM) #827
20.02.2024 1.9.5.6 🐛 fix bug in mip.firq CSR access; mip.firq bits are now read-write - software can trigger FIRQs by writing 1 to the according CSR bit #821
19.02.2024 1.9.5.5 SLINK: add native hardware support for AXI-stream's "tlast" signal #815
19.02.2024 1.9.5.4 ⚠️ remove support of Smcntrpmf ISA extension (counter privilege mode filtering) #814
17.02.2024 1.9.5.3 ⚠️ reworked CPU's hardware performance monitor (HPMs) events #811
16.02.2024 1.9.5.2 ⚠️ revert support for page faults (keep that in mmu branch for now) #809
16.02.2024 1.9.5.1 add two new generics to exclude certain PMP modes from synthesis #808
16.02.2024 🚀1.9.5 New release
15.02.2023 1.9.4.13 allow the DMA to issue a FENCE operation #807
14.02.2024 1.9.4.12 🐛 close another illegal compressed instruction encoding loophole #806
11.02.2024 1.9.4.11 🐛 fix several FPU bugs and design flaws #794
11.02.2024 1.9.4.10 minor additions to previous version (1.9.4.9): fix HPM configuration read-back #804
10.02.2024 1.9.4.9 fixing HPM configuration's null range assertions #803
10.02.2024 1.9.4.8 🐛 fix missing fence pass-through in caches #802
09.02.2024 1.9.4.7 ⚠️ integrate fence signal into CPU bus, remove top entity's fence signals #800
09.02.2024 1.9.4.6 add configurable XIP cache #799
09.02.2024 1.9.4.5 🐛 close further illegal compressed instruction encoding loopholes #797
04.02.2024 1.9.4.4 🐛 fix minor bug: CPU instruction bus privilege signal did not remain stable during the entire request #792
03.02.2024 1.9.4.3 🐛 fix minor bug: CPU instruction bus privilege signal was hardwired to "user-mode" #790
01.02.2024 1.9.4.2 add support for page fault exceptions (yet unused) #786
31.01.2024 1.9.4.1 fix trap priority #784
31.01.2024 🚀1.9.4 New release
31.01.2024 1.9.3.10 close illegal compressed instruction decoding loophole #783
29.01.2024 1.9.3.9 🧪 extend switchable clock domain (CPU bus switch, i-cache, d-cache) #780
29.01.2024 1.9.3.8 top entity input ports now have default values 'L' or 'h' modeling a pull-down or pull-resistor in case they are not explicitly assigned during instantiation #779
28.01.2024 1.9.3.7 FIFO module NULL assertion fix #778
27.01.2024 1.9.3.6 improve CPU's front end (instruction fetch) increasing overall performance #777
27.01.2024 1.9.3.5 🐛 fix typo that renders the clock gating (added in v1.9.3.4) useless: CPU sleep output stuck at zero #776
24.01.2024 1.9.3.4 add optional CPU clock gating (via new generic CLOCK_GATING_EN): shut down the CPU clock during sleep mode; ⚠️ add new HDL design file for the clock gate (neorv32_clockgate.vhd) #775
23.01.2024 1.9.3.3 🐛 remove compressed floating point load/store operations as they are not supported by Zfinx #771
20.01.2024 1.9.3.2 optimize bus switch; minor RTL and comment edits #769
14.01.2024 1.9.3.1 minor rtl cleanups and optimizations #764
11.01.2024 🚀1.9.3 New release
10.01.2024 1.9.2.11 minor HDL fix (introduced in v1.9.2.9) #763
10.01.2024 1.9.2.10 re-add MTIME system time output to processor top (mtime_time_o) #762
08.01.2024 1.9.2.9 minor rtl code cleanups #760
06.01.2024 1.9.2.8 add timer-capture mode to General Purpose Timer (GPTMR); ⚠️ remove "single-shot" mode, change control register layout #759
19.12.2023 1.9.2.7 minor rtl code cleanups, edits and optimization; 🔒 reset mtvec, mepc and dpc CSRs to CPU boot address (CPU_BOOT_ADDR CPU generic) #755
19.12.2023 1.9.2.6 rework FIFO component fixing problems with inferring block RAM #754
11.12.2023 1.9.2.5 clean-up software framework #752
09.12.2023 1.9.2.4 minor rtl code cleanups #747
09.12.2023 1.9.2.3 refine behavior of CPU's sleep state & signal #746
05.12.2023 1.9.2.2 reset mstatus.mpp to "machine-mode" #745
02.12.2023 1.9.2.1 add RISC-V Zicond ISA extension (integer conditional operations) #743
01.12.2023 🚀1.9.2 New release
01.12.2023 1.9.1.9 add menvcfg[h] CSRs #741
30.11.2023 1.9.1.8 🐛 upgrade RISC-V hardware trigger module (Sdtrig ISA extension) to spec. version v1.0 (fixing several minor bugs) #739
25.11.2023 1.9.1.7 cleanup/update assertions and auto-adjusting of invalid generic configurations #738
25.11.2023 1.9.1.6 add option for "ASIC style" register file that provides a full/dedicated hardware reset #736
23.11.2023 1.9.1.5 clean-up & rework CPU branch logic #735
21.11.2023 1.9.1.4 🐛 fix bug in handling of "misaligned instruction exception" #734
20.11.2023 1.9.1.3 🐛 fix wiring of FPU exception flags #733
18.11.2023 1.9.1.2 add XIP clock divider to fine-tune SPI frequency #731
18.11.2023 1.9.1.1 (re-)add SPI high-speed mode, 🐛 fix bug in SPI shift register - introduced in v1.9.0.9 #730
14.11.2023 🚀1.9.1 New release
11.11.2023 1.9.0.9 🧪 add full hardware reset for all flip flops in CPU/processor #724
09.11.2023 1.9.0.8 minor rtl code cleanups #723
04.11.2023 1.9.0.7 upgrade true random number generator to neoTRNG version 3 #721
31.10.2023 1.9.0.6 update crt0's early-boot trap handler #719
30.10.2023 1.9.0.5 minor rtl cleanups and code beautification #718
28.10.2023 1.9.0.4 ⚠️ move FreeRTOS port and demo to a new repository: https://github.com/stnolting/neorv32-freertos #716
18.10.2023 1.9.0.3 ⚠️ remove top's CPU_EXTENSION_RISCV_Zifencei generic - Zifencei ISA extension is now always enabled #709
16.10.2023 1.9.0.2 minor CPU control cleanups and optimizations (branch system) #707
13.10.2023 1.9.0.1 update software framework to GCC-13.2.0 #705
13.10.2023 🚀1.9.0 New release
13.10.2023 1.8.9.9 minor hardware edits and optimizations #703
07.10.2023 1.8.9.8 add "transfer done" flag to DMA #699
04.10.2023 1.8.9.7 ⚠️ rework internal bus protocol #697
29.09.2023 1.8.9.6 optimize PMP logic (reducing area requirements) #695
29.09.2023 1.8.9.5 minor CPU optimizations and code clean-ups #694
23.09.2023 1.8.9.4 added vectored trap handling mode of mtvec for reduced latency from IRQ to ISR #691
22.09.2023 1.8.9.3 🔒 watchdog: add reset password and optional "strict" mode for increased safety #692
15.09.2023 1.8.9.2 ⚠️ rework CFU CSRs; minor rtl edits #690
11.09.2023 1.8.9.1 minor rtl edits and updates #684
09.09.2023 🚀1.8.9 New release
08.09.2023 1.8.8.9 removed unused mcontext and scontext CSRs (Sdtrig ISA extension); CPU optimizations (area and timing) #683
02.09.2023 1.8.8.8 add option to implement up to 2^32 CFU-internal user-defined CSRs (via indirect CSR access) #681
02.09.2023 1.8.8.7 🔒 (re-)add execution monitor: raise an exception if a multi-cycle ALU operation does not complete within a bound amount of time #680
01.09.2023 1.8.8.6 minor rtl edits and cleanups #679
30.08.2023 1.8.8.5 remove "branch prediction" logic - core is smaller and even faster without it #678
25.08.2023 1.8.8.4 add new generic to downgrade on-chip debugger's debug module back to spec. version 0.13 (DM_LEGACY_MODE generic) #677
23.08.2023 1.8.8.3 🧪 add experimental Smcntrpmf ISA extension (counter privilege mode filtering; spec. is frozen but not yet ratified); remove unused menvcfg CSRs #676
19.08.2023 1.8.8.2 ⚠️ constrain mtval CSR; add support for mtinst CSR (trap instruction) #674
19.08.2023 1.8.8.1 🧪 update RTE to support easy emulation of instructions; add example program to showcase how to emulate unaligned memory accesses #673
18.08.2023 🚀1.8.8 New release
17.08.2023 1.8.7.9 minor rtl edits and cleanups #672
13.08.2023 1.8.7.8 ⚠️ constrain/optimize mtval and mcounteren CSRs #671
12.08.2023 1.8.7.7 remove unratified Zicond ISA extension; minor rtl code cleanups and optimizations #670
05.08.2023 1.8.7.6 🐛 fix bug: HPM width configurations below 32 bit fail #665
04.08.2023 1.8.7.5 ⚠️ major code edits/cleanups and file renaming #664
29.07.2023 1.8.7.4 RTL cleanup and optimizations (less synthesis warnings, less resource requirements) #660
28.07.2023 1.8.7.3 ⚠️ reworked SYSINFO module; clean-up address space layout; clean-up assertion notes #659
27.07.2023 1.8.7.2 🐛 make sure that IMEM/DMEM size is always a power of two #658
27.07.2023 1.8.7.1 ⚠️ remove CUSTOM_ID generic; cleanup and re-layout NEORV32_SYSINFO.SOC bits; (🐛) fix gateway's generics (positive -> natural as these generics are allowed to be zero) #657
26.07.2023 🚀1.8.7 New release
24.07.2023 1.8.6.10 🐛 fixing some LR/SC design flaws #654
23.07.2023 1.8.6.9 optimize bus system and customization options #653
22.07.2023 1.8.6.8 minor rtl edits #652
21.07.2023 1.8.6.7 add support for RISC-V A ISA Extension (atomic memory accesses; lr.w/sc.w only!) #651
18.07.2023 1.8.6.6 ⚠️ remove 32-bit data dump mode from UART0/1 sim-mode #650
16.07.2023 1.8.6.5 ⚠️ rework SoC bus system & memory map - part 3: re-enforce PMAs (physical memory attributes) #648
15.07.2023 1.8.6.4 ⚠️ rework SoC bus system & memory map - part 2: move IO address decoding to central IO switch; add i-cache uncached accesses #648
14.07.2023 1.8.6.3 ⚠️ rework SoC bus system & memory map - part 1: add central bus gateway to control core accesses to the main address regions #648
14.07.2023 1.8.6.2 minor rtl edits #646
30.06.2023 1.8.6.1 minor rtl edits, cleanups and optimizations #641
27.06.2023 🚀1.8.6 New release
24.06.2023 1.8.5.9 🧪 VHDL code: use entity instantiation instead of component instantiation #637
24.06.2023 1.8.5.8 optimize CPU control logic; closed further invalid instruction word detection holes #636
23.06.2023 1.8.5.7 ⚠️ remove buskeeper's status register #635
17.06.2023 1.8.5.6 add new Cyclic Redundancy Check module (CRC) #632
03.06.2023 1.8.5.5 re-add (simplified) Stream Link Interface (SLINK) #628
03.06.2023 1.8.5.4 ⚠️ rearrange bits in SYSINFO #627
02.06.2023 1.8.5.3 🐛 executable generation: fix address continuity between .text and .rodata segments #626
19.05.2023 1.8.5.2 add automatic trigger mode to DMA (trigger transfer if a processor-internal peripheral issues an interrupt request) #618
18.05.2023 1.8.5.1 software can now retrieve the configured FIFO size of the TRNG #616
18.05.2023 🚀1.8.5 New release
18.05.2023 1.8.4.9 remove is_simulation flag from SYSINFO; add programmable interrupt to TRNG module #615
12.05.2023 1.8.4.8 mtval CSR now provides the address of ebreak exceptions (re-added temporarily to pass RISC-V ISA tests) #611
03.05.2023 1.8.4.7 🐛 fix bug in FPU (terminate FPU sub-module operations if an exception has been raised) #609
02.05.2023 1.8.4.6 make SDI FIFO access entirely synchronous; upgrade processor memory modules; update test setup wrappers #608
30.04.2023 1.8.4.5 rework processor-internal bus system #607
27.04.2023 1.8.4.4 minor hardware edits and switching activity optimizations of CPU bus unit #605
25.04.2023 1.8.4.3 🐛 fix bug in DMA (corrupted write-back when there are bus wait cycles - e.g. when no caches are implemented) #601
24.04.2023 1.8.4.2 minor rtl edits; shorten critical path of d-cache setup #599
22.04.2023 1.8.4.1 add optional direct memory access controller (DMA) #593
21.04.2023 🚀1.8.4 New release
21.04.2023 1.8.3.9 🐛 fix timeout bug in FPU normalizer #592
19.04.2023 1.8.3.8 minor processor bus system optimizations and clean-ups #591
15.04.2023 1.8.3.7 🐛 ⚠️ wfi and XIRQ bug fixes; massive RTL code cleanup and optimization of CPU control #586
14.04.2023 1.8.3.6 [UARTs] software can now retrieve the configured RX/TX FIFO sizes from the DATA register #581
13.04.2023 1.8.3.5 🐛 fixed bug in FPU control logic (introduced in some earlier clean-up commit); minor code edits and optimizations #578
07.04.2023 1.8.3.4 rtl edits and cleanups #571
05.04.2023 1.8.3.3 update external interrupt controller (XIRQ) #570
05.04.2023 1.8.3.2 time CSR struggles (again) and logic optimization #569
01.04.2023 1.8.3.1 add full NA4 and NAPOT support to the (now) RISC-V-compatible physical memory protection (PMP) #566
31.03.2023 🚀1.8.3 New release
29.03.2023 1.8.2.9 ⚠️ remove CPU_EXTENSION_RISCV_Zicsr generic - Zicsr ISA extension is always enabled; optimize bus switch; VHDL code cleanups #562
25.03.2023 1.8.2.8 🧪 add configurable data cache (dCACHE) #560
24.03.2023 1.8.2.7 add full support of mcounteren CSR; cleanup counter and PMP CSRs; i-cache optimization #559
18.03.2023 1.8.2.6 add new generic JEDEC_ID (official JEDEC identifier; used for mvendorid CSR); further generics cleanups #557
17.03.2023 1.8.2.5 add RISC-V time[h] CSRs (part of the Zicntr ISA extension) #556
17.03.2023 1.8.2.4 re-add VHDL process names #555
15.03.2023 1.8.2.3 rtl reworks, cleanups and optimizations #550
11.03.2023 1.8.2.2 add support for RISC-V Zicond ISA extension (conditional operations) #546
10.03.2023 1.8.2.1 rtl code edits, clean-ups and minor optimizations (improve branch prediction) #545
10.03.2023 🚀1.8.2 New release
09.03.2023 1.8.1.10 ⚠️ move tri-state drivers (ONEWIRE and TWI) out of the core #543
08.03.2023 1.8.1.9 reintegrate UART RTS/CTS hardware flow-control #541
07.03.2023 1.8.1.8 update smart LED controller NEOLED #536
05.03.2023 1.8.1.7 ⚠️ rework and update UART0 & UART1 #533
04.03.2023 1.8.1.6 ⚠️ rework and update SPI module #530
02.03.2023 1.8.1.5 minor general purpose timer (GPTMR) code edits #529
02.03.2023 1.8.1.4 🐛 fix timeout bug in FPU (conversion and add/sub instructions) #528
25.02.2023 1.8.1.3 add new processor module: Serial Data Interface (SDI) - a SPI device-class interface #505
24.02.2023 1.8.1.2 ⚠️ rename top interface signals of XIP and SIP modules #504
23.02.2023 1.8.1.1 CFS: add another 32 interface register (now having 64 memory-mapped registers for custom usage) #503
23.02.2023 🚀1.8.1 New release
22.02.2023 1.8.0.10 ⚠️ remove stream link interface (SLINK) #502
19.02.2023 1.8.0.9 ⚠️ constrain number of PWM channels to 12 (was 60); change base address of PWM module #501
18.02.2023 1.8.0.8 🐛 fix minor bug in CPU's co-processor monitor; minor VHDL clean-ups and edits #500
13.02.2023 1.8.0.7 minor CPU optimization and fixes #497
11.02.2023 1.8.0.6 ⚠️ replace boolean IO_GPIO_EN generic by natural IO_GPIO_NUM generic to fine-tune GPIO pin number #491
10.02.2023 1.8.0.5 🧪 add CPU co-processor monitor (to auto-terminate operation if a co-processor operation takes too long) #490
10.02.2023 1.8.0.4 replace CPU-internal control bus by a VHDL record (much cleaner code); minor control optimizations; add 6ht CPU co-processor slot (yet unused) #489
05.02.2023 1.8.0.3 CPU control optimizations #487
04.02.2023 1.8.0.2 fix RISC-V-incompatible behavior of mip CSR #486
01.02.2023 1.8.0.1 clean-up CPU's interrupt controller; fix race condition in FIRQ trigger/acknowledge #484
25.01.2023 🚀1.8.0 New release
21.01.2023 1.7.9.10 update software framework; 🐛 fix bug in constructor calling in crt0 start-up code #478
15.01.2023 1.7.9.9 ⚠️ rework CPU counters; remove mtime_i/o top entity ports; remove time[h] CSRs #477
14.01.2023 1.7.9.8 minor CPU control edits, optimizations and fixes #476
10.01.2023 1.7.9.7 ⚠️ rework watchdog timer (WDT) #474
06.01.2023 1.7.9.6 update neoTRNG v2 #472
06.01.2023 1.7.9.5 CPU control: logic optimization and fix minor bug in trigger module #470
04.01.2023 1.7.9.4 update on-chip debugger: 🧪 remove debug module's haltsum0 register; rework DMI to comply with RISC-V debug spec.; minor edits, updates and fixes #468
23.12.2022 1.7.9.3 ⚠️ add explicit Sdext and Sdtrig ISA extension generics (replacing DEBUG); trigger-module can now also be used by machine-mode software without the on-chip debugger, add minimal example program sw/example/demo_trigger_module #465
23.12.2022 1.7.9.2 upgrade the on-chip debugger (OCD) to spec. version 1.0; major logic and debugging response time optimizations #463
22.12.2022 1.7.9.1 remove signal initialization (in reset generator) as some FPGAs do not support FF initialization via bitstream #464
21.12.2022 🚀1.7.9 New release
21.12.2022 1.7.8.11 CPU: remove explicit reset-to-don't-care; branch and CSR access check logic optimizations; close further illegal instruction encoding hole #462
20.12.2022 1.7.8.10 SOC: rework r/w access logic; split read and write accesses into two processes; removed explicit reset-to-don't-care #461
18.12.2022 1.7.8.9 mtval is no longer read-only and can now be written by machine-mode software #460
17.12.2022 1.7.8.8 🐛 fix incorrect value written to mepc when encountering an "instruction access fault" exception #458
16.12.2022 1.7.8.7 🐛 fix instruction cache block invalidation when a bus access error occurs during memory block fetch (after cache miss) #457
16.12.2022 1.7.8.6 🧪 optimized park-loop code (on-chip debugger firmware) providing slightly faster debugging response; added explicit address generics for defining debug mode entry points #456
13.12.2022 1.7.8.5 code cleanup of FIFO module; improved instruction prefetch buffer (IPB) - IPD depth can be as small as "1" and will be adjusted automatically when enabling the C ISA extension; update hardware implementation results #455
09.12.2022 1.7.8.4 new option to add custom R5-type (4 source registers, 1 destination register) instructions to Custom Functions Unit (CFU) #452
08.12.2022 1.7.8.3 🐛 fix interrupt behavior when in user-mode; minor core rtl fixes; do not check registers specifiers in CFU instructions (i.e. using registers above x15 when E ISA extension is enabled) #450
03.12.2022 1.7.8.2 new option to add custom R4-type RISC-V instructions to Custom Functions Unit (CFU); rework CFU hardware module, intrinsic library and example program #449
01.12.2022 1.7.8.1 package cleanup #447
28.11.2022 🚀1.7.8 New release
14.11.2022 1.7.7.9 minor rtl edits and code optimizations #442
05.11.2022 1.7.7.8 minor rtl edits #441
03.11.2022 1.7.7.7 add fine-grained clock configuration for TWI module: add fine-grained clock configuration, add clock stretching configuration flag #440
01.11.2022 1.7.7.6 ⚠️ rework SPI module #438
24.10.2022 1.7.7.5 🧪 remove weird Quartus latch warnings by modifying VHDL coding style #434
19.10.2022 1.7.7.4 optimize UART's RTS (hardware flow control) behavior #433
15.10.2022 1.7.7.3 🐛 fix bug in is_power_of_two_f VHDL function (thanks Alan!) #428
12.10.2022 1.7.7.2 add dedicated hardware reset to all CPU counters ([m]cycle[h], [m]instret[h], [m]hpmcounter[h]); all CSRs now provide a dedicated hardware reset #426
09.10.2022 1.7.7.1 fix Quartus synthesis issue (VHDL): make sure reset state is the first entry in a state list #423
24.09.2022 🚀1.7.7 New release
23.09.2022 1.7.6.10 cleanup native data path size (remove data_width_c package constant); initial preparations to support RV64 ISA extension somewhere in the future #417
18.09.2022 1.7.6.9 🐛 fixed instruction decoding collision in B ISA extensions - B extension is now fully operational and verified (see neorv32-riscof)! #413
13.09.2022 1.7.6.8 🐛 bug fix: clearing mie's FIRQ bits did not clear the according pending FIRQs #411
12.09.2022 1.7.6.7 minor rtl edits and cleanups #410
10.09.2022 1.7.6.6 ⚠️ set mtval to zero on any illegal instruction exception - removes redundancies, simplifies hardware #409
09.09.2022 1.7.6.5 minor rtl edits; add "output gate" to FIFO component #408
08.09.2022 1.7.6.4 ⚠️ cleanup CPU standard counters and remove CPU_CNT_WIDTH generic #407
07.09.2022 1.7.6.3 minor rtl edits and cleanups #406
03.09.2022 1.7.6.2 cleanup hardware reset logic #405
02.09.2022 1.7.6.1 add new processor module: 1-Wire Interface Controller (ONEWIRE) #402
28.08.2022 🚀1.7.6 New release
27.08.2022 1.7.5.9 fix minor core rtl issues that were found while experimenting with a low-level netlist of the processor #398
26.08.2022 1.7.5.8 cleanup crt0 start-up code: remove setup of mcountern and mcountinhibit CSRs #397
24.08.2022 1.7.5.7 minor rtl cleanups #396
20.08.2022 1.7.5.6 update software framework to GCC 12.1.0 (new prebuilt toolchains available!) #391
18.08.2022 1.7.5.5 🔒 add TRNG read data protection #389
18.08.2022 1.7.5.4 minor rtl cleanup in PWM module #388
17.08.2022 1.7.5.3 optimized CPU front-end - faster instruction fetch #387
16.08.2022 1.7.5.2 relocate TWI tri-state drivers #386
15.08.2022 1.7.5.1 change base address of BUSKEEPER #385
15.08.2022 🚀1.7.5 New release
14.08.2022 1.7.4.10 cleanup of FIFO rtl component #384
13.08.2022 1.7.4.9 minor rtl cleanups and optimizations #383
01.08.2022 1.7.4.8 add configurable data FIFO to SPI module #381
31.07.2022 1.7.4.7 ⚠️ rework SLINK module #377
25.07.2022 1.7.4.6 ⚠️ simplify memory configuration of linker script; add in-console configuration option #375
22.07.2022 1.7.4.5 add CUSTOM_ID generic; update bootloader #374
21.07.2022 1.7.4.4 🔒 specify physical memory attributes (PMA) #372
18.07.2022 1.7.4.3 minor rtl edits and updates #369
15.07.2022 1.7.4.2 🐛 fixed PMP configuration error when PMP_NUM_REGIONS = 0 #368
15.07.2022 1.7.4.1 🐛 fix permanent stall of [m]cycle[h] and [m]instret[h] counter if HPM_NUM_CNTS = 0; 🐛 fixed bug in Wishbone we signal when ASYNC_TX mode enabled; hardwire dcsr.mprven to 1 #367
14.07.2022 🚀1.7.4 New release
14.07.2022 1.7.3.11 reset all "core" CSRs to all-zero #366
13.07.2022 1.7.3.10 🐛 reworked/fixed physical memory protection; added mstatus.MPRV flag #365
12.07.2022 1.7.3.9 clean-up and rework bootloader; add "boot via XIP" option #364
11.07.2022 1.7.3.8 physical memory protection(PMP): locking entry i in TOR mode will now also prevent write access to pmpaddr(i-1) (RISC-V compatibility) #363
09.07.2022 1.7.3.7 🐛 fixed bootloader's byte order when using the flash for application storage: ⚠️ was BIG-endian, is now also LITTLE-endian #362
08.07.2022 1.7.3.6 🧪 added burst mode option to XIP module to accelerate consecutive flash read accesses; ⚠️ fixed XIP endianness: was BIG-endian and is now LITTLE-endian #361
08.07.2022 1.7.3.5 Update "raw" executable generation options of makefile and image generator #360
05.07.2022 1.7.3.4 add "infrastructure" for cached (burst) bus accesses #359
01.07.2022 1.7.3.3 minor rtl cleanups #357
29.06.2022 1.7.3.2 🧪 add experimental core complex wrapper for integration into the LiteX SoC builder framework #353
28.06.2022 1.7.3.1 🐛 fix bug that caused permanent CPU stall if illegal load/store instruction #356
23.06.2022 🚀1.7.3 New release two years NEORV32! 🎉
21.06.2022 1.7.2.10 add option to implement an asynchronous Wishbone TX path; add new top generic MEM_EXT_ASYNC_TX #352
17.06.2022 1.7.2.9 minor rtl code clean-ups/optimization of CPU core and Neoled module #351
16.06.2022 1.7.2.8 ⚠️ rework SLINK module, add support for T_LAST signals #349
11.06.2022 1.7.2.7 reworked processor reset system; ⚠️ changed behavior of watchdog's "lock" bit; add watchdog "access password" #345
10.06.2022 1.7.2.6 Wishbone interface now gates all outgoing signals (= signals remain stable if there is no active Wishbone access) #344
09.06.2022 1.7.2.5 reworked TWI module fixing several interface timing issues; ⚠️ removed "START condition done interrupt" and "STOP condition done interrupt" #340
06.06.2022 1.7.2.4 split executable images into package and body #338
04.06.2022 1.7.2.3 🐛 fixed bug in SPI and XIP modules: phase offset between SPI clock and SPI data #336
03.06.2022 1.7.2.2 (finally) added a dedicated hardware reset to all IO/peripheral devices #334
02.06.2022 1.7.2.1 add watchdog pause flag to stop watchdog timeout counter when CPU is in sleep mode #331
02.06.2022 🚀1.7.2 New release
01.06.2022 1.7.1.11 🐛 fixed bug in debugger's single-stepping mode (bug introduced with version 1.7.1.9) #329
29.05.2022 1.7.1.10 rework bootloader's "SPI flash presence detection"; added new option (SPI_FLASH_ADDR_BYTES) to customize the bootloader SPI flash address width (16-, 24- or 32-bit) #321
29.05.2022 1.7.1.9 🐛 fixed bug in CPU trap logic: collision of synchronous and asynchronous exceptions #327
19.05.2022 1.7.1.8 🐛 fixed bug in XIP address conversion logic: sub-word read accesses (half-word, byte) returned wrong data #320
17.05.2022 1.7.1.7 add optional/configurable data FIFO to TRNG; new top generic IO_TRNG_FIFO #316
13.05.2022 1.7.1.6 🐛 fixed bug in BUSKEEPER timeout logic #315
10.05.2022 1.7.1.5 code clean-up and minor optimization of B extension (bit-manipulation) CPU co-processor #312
06.05.2022 1.7.1.4 upgrade TRNG module to new neoTRNG v2 #311
05.05.2022 1.7.1.3 🐛 bug fix in CPU counter overflow logic (cycle and instret counters); minor optimization of CPU execution unit #310
28.04.2022 1.7.1.2 add flag to mxisa CSR to check if this is a simulation (bit 20: CSR_MXISA_IS_SIM); add flag to mxisa CSR to check if all CPU core register have a dedicated reset (bit 21: CSR_MXISA_HW_RESET) #309
27.04.2022 1.7.1.1 ⚠️ removed RISC-V A ISA extension (atomic memory accesses); removed Wishbone "lock" signal #308
25.04.2022 🚀1.7.1 New release
23.04.2022 1.7.0.9 🐛 fixed minor bug in HPM event logic: imprecise "taken branch" (HPMCNT_EVENT_TBRANCH) event
23.04.2022 1.7.0.8 add simple branch prediction (predict "always taken") to CPU front-end to reduce branch penalty (less wait cycles); #306
22.04.2022 1.7.0.7 reworked CPU's MUL/DIV unit (M-extension): less area and shorter critical path; #305
21.04.2022 1.7.0.6 further VHDL code clean-ups and minor optimizations; #303
19.04.2022 1.7.0.5 minor clean-up and optimization of CPU's bus unit
13.04.2022 1.7.0.4 improve timing of CPU's barrel shifter (FAST_SHIFT_EN = true) by moving the register stage; #301
12.04.2022 1.7.0.3 CPU front-end is now controlled by a synchronous state machine (all outgoing signals are driven by registers), reducing critical path of memory system & reducing area costs; ⚠️ CPU_IPB_ENTRIES now has to be >= 2; #300
11.04.2022 1.7.0.2 cleanup of CPU front-end (instruction fetch); cleaner code, less area costs; #299
10.04.2022 1.7.0.1 rework handling of x0 register (zero): shortens critical path and reduces area costs; #298
08.04.2022 🚀1.7.0 New release
08.04.2022 1.6.9.11 🐛 fixed bug in interrupt setup of crt0 start-up code #297
08.04.2022 1.6.9.10 rework compressed instruction (C ISA extension) de-compressor: 🔒 closed further illegal compressed instruction holes; code clean-ups; mtval CSR now shows the decompressed 32-bit instruction when executing an illegal compressed instruction; minor RTL code cleanups (removing legacy stuff); PR #296
07.04.2022 1.6.9.9 AND-gate CSR read address: reduces CPU switching activity (= dynamic power consumption) and even reduces area costs; PR #295
06.04.2022 1.6.9.8 🐛 fixed instruction decoding collision in CPU B extension; 🔒 closed further illegal instruction encoding holes; optimized illegal instruction detection logic; PR #294
04.04.2022 1.6.9.7 major CPU logic optimization: reduced area costs and shortened critical path (higher f_max!); 🐛 fixed rare bug in RTE core (if C-extension is not implemented); 🔒 closed further illegal instruction encoding holes; PR #293
01.04.2022 1.6.9.6 rework CPU front-end: instruction issue engine; much cleaner code, slightly less HW required; PR #292
29.03.2022 1.6.9.5 minor clock generator edits: reset clock generator explicitly if not being used by any peripheral/IO device
19.03.2022 1.6.9.4 🧪 change usage of VHDL *_reduce_f functions for signals that might effect gate-level simulations; PR #290
19.03.2022 1.6.9.3 🐛 fixed minor bug in FPU - incorrect/missing reset (even if reset to '-') of some registers
18.03.2022 1.6.9.2 fixed minor bug in TRNG interface hand shake (that marked the same RND value as "valid" for several times); minor optimization of processor's reset generator
14.03.2022 1.6.9.1 mtval CSR is set to zero for software breakpoints ([c.]ebreak instruction(s)) - this is permitted by the RISC-V machine ISA spec. v1.12; PR #289
09.03.2022 🚀1.6.9 New release
09.03.2022 1.6.8.12 CPU core: minor code clean-up
08.03.2022 1.6.8.11 clean-up of CPU's privilege mode logic
07.03.2022 1.6.8.10 added compressed floating-point instructions (Zfinx ISA extensions); minor optimization of compressed instruction decoding logic
05.03.2022 1.6.8.9 CPU core: minor optimizations, code clean-ups and edits; added RISC-V mstatus.TW bit to allow/disallow execution of wfi instruction in user mode; PR #285
02.03.2022 1.6.8.8 🐛 fixed bug in layout of CPU's pmpaddr CSRs (physical memory protection); PR #283
01.03.2022 1.6.8.7 CPU core: minor optimizations, code clean-ups and edits
26.02.2022 1.6.8.6 ⚠️ 🔒 reworked Physical Memory Protection (PMP): replacing NAPOT mode by TOR mode and fixing several minor PMP CSR-access bugs; maximum number of PMP regions is now limited to 16 entries; ⚠️ removed BUSKEEPER's NULL address check (introduced in version 1.6.5.4) - use a single PMP entry instead; see PR #281
25.02.2022 1.6.8.5 minor BUSMUX (bus multiplexer for CPU's instruction and data buses) and CPU control edits (pipeline front-end)
24.02.2022 1.6.8.4 🐛 fixed bug in mip CSR (introduced in version 1.6.4.6 with #236): to clear/ack a pending interrupt software needs to clear the according mip bit; see PR #280
24.02.2022 1.6.8.3 reworked CPU's data path (use a few wide multiplexers instead of many small ones); PR #279
23.02.2022 1.6.8.2 CPU logic optimizations (less area): simplified CPU co-processor interface; minor optimization of bus unit access arbiters; optimized M extension's (mul/div co-processor) divider unit
18.02.2022 1.6.8.1 minor CPU control logic optimizations: simplified execute engine; faster execution of SYSTEM instructions (one cycle less)
17.02.2022 🚀1.6.8 New release
17.02.2022 1.6.7.10 hardwired dcsr.stopcount to 1: all standard counters ([m]cycle[h] and [m]instret[h], but NOT [m]time[h]!!) and all hardware performance monitor (HPM) counters are stopped when the CPU is in debug mode; PR #277
16.02.2022 1.6.7.9 ⚠️ added custom mxisa CSR replacing SYSINFO's NEORV32_SYSINFO.CPU memory-mapped register: bit-positions remain but names and the actual access mechanism (CSR vs. memory-mapped) have changed! see PR #276
11.02.2022 1.6.7.8 🧪 added newlib's system calls (stubs) and linker script symbols for heap memory to support dynamic memory allocation (e.g. malloc) and even standard IO functions like printf; see PR #275
10.02.2022 1.6.7.7 🧪 added RISC-V hardware trigger module to CPU - allows to set hardware breakpoints (via gdb's hb/hbreak command) to debug code from ROM; see PR #274; 🐛 minor bug fix in ebreak instruction's dcsr.cause value (was 0b010 but has to be 0b001)
08.02.2022 1.6.7.6 ⚠️ renamed default branch of repository to main
07.02.2022 1.6.7.5 removed default values for bi-directional top entity ports twi_sda_io and twi_scl_io
05.02.2022 1.6.7.4 added err_o signal to IMEM module; if the IMEM is implemented as true ROM any write attempt will raise a store access fault exception (with a [DEVICE_ERR] error); see PR #273
03.02.2022 1.6.7.3 🧪 using LTO (link-time-optimization) option for bootloader; improved bootloader user console; see PR #268
31.01.2022 1.6.7.2 🐛 fixed minor bug in bootloader's MTIME handling (bootloader crashed if Zicntr ISA extension not enabled), fixed minor issues in MTIME and time CSRs handling; added MTIME example program; see PR #267
30.01.2022 1.6.7.1 added Zxcfu ISA extension for user-defined custom RISC-V instructions; see PR #264
28.01.2022 🚀1.6.7 New release
28.01.2022 1.6.6.10 🐛 fixed bug in bit-manipulation co-processor: decoding collision between cpop and rol instructions; 🐛 fixed bug in co-processor arbitration when an illegal instruction is detected; added four additional (yet unused) CPU co-processor slots; PR #262
27.01.2022 1.6.6.9 reworked CFS "user" logic; added CFS demo program; see PR #261
27.01.2022 1.6.6.8 added support for RISC-V bit-manipulation (B) carry-less multiplication instructions Zbc sub-extension; added test cases and intrinsics; the NEORV32 bit-manipulation ISA extension (B) now fully complies to the RISC-V specs. v0.93; see PR #260
26.01.2022 1.6.6.7 added support for RISC-V bit-manipulation (B) single-bit instructions Zbs sub-extension; added test cases and intrinsics; see PR #259
26.01.2022 1.6.6.6 minor logic optimizations in CPU control unit
25.01.2022 1.6.6.5 🔒 on-chip debugger: the memory-mapped registers of the debug module (DM) are only accessible/visible when the CPU is actually in debug mode; any access outside of debug mode will now raise a bus exception
22.01.2022 1.6.6.4 minor logic optimizations in CPU control unit, minor improvement of critical path
21.01.2022 1.6.6.3 reworked CPU's instruction issue engine (area optimization: ~100 LUTs less on an Intel Cyclone IV), PR #256; minor CPU control unit code clean-ups and logic optimizations
18.01.2022 1.6.6.2 ⚠️ moved setups folder to new neorv32-setups repository, PR #254
18.01.2022 1.6.6.1 minor MTIME VHDL code clean-up; minor logic optimization of CPU's bus unit
17.01.2022 🚀1.6.6 New release
14.01.2022 1.6.5.9 GPIO module: write accesses to the GPIO module's "input" registers will now raise a bus exception; PR #255
11.01.2022 1.6.5.8 minor rtl code clean-ups and edits in rtl/core; any write access to the SYSINFO module will now show up as a BUSKEEPER's "DEVICE_ERR"
08.01.2022 1.6.5.7 🐛 fixed bug in BUSKEEPER's error type logic (introduced in version 1.6.5.4); removed "unexpected ERR/ACK" error codes; PR #253
07.01.2022 1.6.5.6 XIP & SPI: added high-speed SPI mode (SPI clocking at half of the processor clock), see PR #251
06.01.2022 1.6.5.5 ⚠️ optimized/reworked XIP (execute in place) module, see PR #249
04.01.2022 1.6.5.4 BUSKEEPER can now optionally check for NULL address accesses (address 0x00000000), see PR #247
02.01.2022 1.6.5.3 added Execute In Place (XIP) module allowing code to be directly executed from an external SPI flash, see PR #244
02.01.2022 1.6.5.2 🐛 fixed minor bug in CPU's instruction fetch unit (only issue new instruction fetch request when the previous one has been completed)
16.12.2021 🚀1.6.5 New release
15.12.2021 1.6.4.10 minor logic optimization of CPU's pipeline front-end (instruction fetch and instruction issue)
14.12.2021 1.6.4.9 optimized CPU's multiplication/division co-processor: divisions are 1 cycle faster, fast-multiplications (when using DSPs) are 1 cycle faster, slightly less resource utilization, see PR #240
11.12.2021 1.6.4.8 watchdog: added new DBEN and HALF flags to control register (enable WDT during debugging, check timeout counter level), see PR #239
10.12.2021 1.6.4.7 optimized CPU's multiplication/division co-processor: all mul/div operations are 1 cycle faster + slightly less resource utilization, see PR #238
08.12.2021 1.6.4.6 ⚠️ reworked Fast Interrupt Requests (FIRQ) system, see PR #236
03.12.2021 1.6.4.5 added SYSINFO_SOC_IS_SIM flag to SYSINFO to check if processor is being simulated (not guaranteed, depends on the toolchain's 'pragma' support), see PR #231
03.12.2021 1.6.4.4 🐛 fixed bug in Wishbone bus interface: timeout configurations (via MEM_EXT_TIMEOUT generic) that are a power of two (e.g. 256) caused immediate timeouts; timeout counter was one bit short; same problem for processor-internal bus monitor (BUSKEEPER); see PR #230
02.12.2021 1.6.4.3 ⚠️ removed legacy software compatibility wrappers (sw/lib/include/neorv32_legacy.h and neorv32_uart_* functions)
28.11.2021 1.6.4.2 🐛 fixed bug in UART[0/1] overrun flag (was not set/cleared correctly); fixed bug in UART0 enable function neorv32_uart0_enable()
28.11.2021 1.6.4.1 (⚠️) bootloader now stores executable in little-endian byte-order to SPI flash
26.11.2021 🚀1.6.4 New release
22.11.2021 1.6.3.11 on-chip debugger: reworked JTAG signal input/output synchronization logic (see PR #216)
22.11.2021 1.6.3.10 reworked TRNG (less hardware requirements, improved quality), see PR #212 and stnolting/neoTRNG
21.11.2021 1.6.3.9 minor rtl edits: configuring an IMEM or DMEM size (MEM_INT_IMEM_SIZE / MEM_INT_DMEM_SIZE generic) of 0 will now exclude the according memory from synthesis (and also clears the according NEORV32_SYSINFO.SOC flags)
18.11.2021 1.6.3.8 TWI: removed TWI_CTRL_CKSTEN flag (enable clock stretching) from control registers, clock-stretching is now always enabled
14.11.2021 1.6.3.7 major control unit and ALU logic optimizations, reduced hardware footprint; 🔒 closed further illegal instruction encoding holes (system environment instructions, ALU and ALU-immediate instructions, FENCE instructions); PR #204
10.11.2021 1.6.3.6 optimized BUSKEEPER: removed redundant logic - bus keeper now also shows an external interface access timeout (if implemented) as "timeout error"; removed BUSKEEPER_ERR_SRC status flag; ⚠️ added err_o (fault access operation) to the custom functions subsystem (CFS)
09.11.2021 1.6.3.5 ⚠️ reworked IRQ trigger logic of SPI, TWI, UART0, UART1, NELOED and SLINK; FIRQs now only trigger once when the programmed interrupt condition is met instead of triggering all the time (see PR #202)
06.11.2021 1.6.3.4 🐛 fixed bug in WISHBONE interface: pipelined Wishbone mode did not clear STB after first transfer cycle
05.11.2021 1.6.3.3 🐛 fixed bug in general purpose timer GPTMR - clock prescaler had no effect, the timer was always counting at full processor clock speed; minor watchdog (WDT) code edits
04.11.2021 1.6.3.2 added optional alternative IMEM and DMEM architecture-only design files (in rtl/core/mem); these are not device-specific ("cyclone 2") as they do not use any FPGA-specific primitives or macros - just a different HDL style for describing memories is used (see PR #192 and Issue #197)
03.11.2021 1.6.3.1 added new peripheral module - General Purpose 32-bit Timer GPTMR (see PR #195)
02.11.2021 🚀1.6.3 New release
01.11.2021 1.6.2.13 added new top generics to explicitly control implementation of Zicntr (CPU base counters) and Zihpm (hardware performance monitors, see PR #192
30.10.2021 1.6.2.12 🔒 added memory-mapped register to BUSKEEPER module - software can now retrieve the actual cause of an instruction / data-load / data-store bus access fault exception (access timeout or device error); see PR #191
28.10.2021 1.6.2.11 added Zba bit-manipulation sub-extension; ⚠️ removed configuration option for B sub-extensions: removed CPU_EXTENSION_RISCV_Zbb generic and according SYSINFO flag, added new CPU_EXTENSION_RISCV_B generic (to implement bit-manipulation B ISA extension with all currently supported subsets), see PR #190
27.10.2021 1.6.2.10 🐛 CPU control unit: fixed imprecise illegal instruction exceptions - MEPC and MTAVL did not reflect the correct exception-causing data for illegal ALU-class (non-multi-cycle like SUB) operations; optimized critical path of exception logic (illegal compressed instruction detection)
27.10.2021 1.6.2.9 CPU control unit: minor logic optimization - fence.i instruction needs 1 cycle less to execute, reduced HW footprint of control engine, shortened CPU's critical path (PC update logic)
26.10.2021 1.6.2.8 🐛 bootloader: fixed bug in stack pointer initialization (introduced in version 1.6.2.7); minor SPI unit VHDL code clean-up
24.10.2021 1.6.2.7 minor control unit fixes (add logic to check both half-words of a unaligned 32-bit instruction did not cause any bus exceptions); minor ALU logic optimization; optimized ctr0.S: bootloader stack pointer initialization (is now done based on the actual physical memory configuration) - bootloader is now even more independent of the actual platform configuration
24.10.2021 1.6.2.6 🐛 fixed HW bug introduced in version 1.6.2.4 (write access arbitration in BUSMUX)
21.10.2021 1.6.2.5 minor code edits; improved stability of UART receiver's start-bit detection (more "spike"-resistant)
21.10.2021 1.6.2.4 minor VHDL code fixes, clean-ups, optimizations and comment typo fixes (💄)
20.10.2021 1.6.2.3 SPI: minor VHDL code optimization and clean-up; NOTE: all serial interfaces (SPI, TWI, UARTs) allow to terminate a running transmission by clearing the enable flag in the module's control register
18.10.2021 1.6.2.2 🐛 *_reduce_f VHDL functions did not work for single-bit operands (see PR #186)
18.10.2021 1.6.2.1 SPI: added option to configure clock polarity - the SPI module now supports all standard clock modes (0,1,2,3) (see PR #185); logic optimization of SPI module
17.10.2021 🚀1.6.2 New release
17.10.2021 1.6.1.13 ⚠️ ⚠️ main software makefile: modified behavior of MARCH and MABI variables - the -march and -mabi flags are no longer required/allowed (example: overriding makefile's default MARCH is now done using make MARCH=rv32imac ...) (see PR #184)
15.10.2021 1.6.1.12 ⚠️ Custom Functions Subsystem (CFS): removed sleep input (indicating CPU is in sleep mode); minor CPU control logic optimization
15.10.2021 1.6.1.11 UARTs: added optional configurable RX and TX FIFOs, added fine-grained RX/TX IRQ configuration options (see PR #183)
14.10.2021 1.6.1.10 SLINK: added fine-grained, per-link interrupt configuration (see PR #182)
13.10.2021 1.6.1.9 NEOLED: added new control register bit NEOLED_CTRL_IRQ_CONF to configure IRQ condition: 0 = IRQ if FIFO is less than half-full, 1 = IRQ if FIFO is empty; IRQ behavior is fully backwards compatible if NEOLED_CTRL_IRQ_CONF is ignored (kept zero)
12.10.2021 1.6.1.8 added dedicated half_o signal to FIFO component (FIFO at least half-full), simplifies half-full test logic in FIFO-utilizing modules (area footprint and critical path); minor logic/hardware optimization of NEOLED module
09.10.2021 1.6.1.7 ⚠️ reworked fast interrupt requests (FIRQ) CPU interrupt system: fast interrupt requests are now also high-level-triggered (like the RISC-V standard interrupts) and stay asserted until explicitly acknowledged by software (PR #176)
06.10.2021 1.6.1.6 🐛 fixed bugs in signal assignments and processor configuration of setups/radiant/UPduino_v3 setup; minor CPU HPM counter fix (architecture condition for "multi-cycle ALU wait cycle" HPM event)
05.10.2021 1.6.1.5 🔒 the CPU now ensures that all illegal instructions do not commit any potential architecture state changes (like writing registers or triggering memory accesses); CPU logic optimization (smaller footprint)
04.10.2021 1.6.1.4 moved CPU's comparator logic from register file unit to ALU unit (to allow easier replacement of register file design unit by technology-optimized one)
03.10.2021 1.6.1.3 🐛 fixed UART signal connection in rtl/system_integration wrappers
01.10.2021 1.6.1.2 ⚠️ removed mstatus.TW (timeout wait) bit, wfi instruction is now always allowed to be executed in less-privileged modes; minor CPU control unit logic optimizations
01.10.2021 1.6.1.1 on-chip-debugger: wfi instruction acts as a simple nop when in debug mode or during single-stepping
28.09.2021 🚀1.6.1 New release
28.09.2021 1.6.0.13 🐛 fixed elementary bug in MTIME comparator logic (interrupt condition mtime >= mtimecmp was not always evaluated correctly)
28.09.2021 1.6.0.12 fixed CPU's IRQ prioritization: (re-)enter debug mode interrupts have to be evaluated before all other interrupts
27.09.2021 1.6.0.11 ⚠️ Zifencei extension is required for the on-chip debugger; executing fence.i without having the Zifencei extension enabled will now cause an illegal instruction exception
22.09.2021 1.6.0.10 reworked CPU/software handshake of external interrupt controller XIRQ to avoid "external IRQ -> CPU IRQ" race conditions
22.09.2021 1.6.0.9 if CPU_CNT_WIDTH generic (actual width of [m]cycle and [m]instret counters) is less than 64 the remaining bits are now just hardwired to zero ignoring any write access instead of causing an exception; minor CPU hardware optimizations
22.09.2021 1.6.0.8 🐛 fixed bug introduced in previous version: misaligned instruction address - PC and all instruction address-related registers need to have bit 0 hardwired to zero, misaligned instructions can only appear if NOT using C ISA extension
21.09.2021 1.6.0.7 ⚠️ reworked CPU trap/exception system (in order to comply with RISC-V specs.): removed non-maskable interrupt (NMI, top signal nm_irq_i); reworked CPU trap prioritization (sync before async); RISC-V interrupts (MTI, MSI, MEI) are now high-level-triggered and require to stay asserted until they are explicitly acknowledged; fixed minor bug in misaligned instruction check logic (PC(0) = '1' will always cause a misalignment exception); updated trap/interrupt-related documentation
20.09.2021 1.6.0.6 the NEORV32's misa, mip and mtval CSRs are read-only; however, write accesses to these CSRs do not raise an illegal instruction exception (anymore) to be compatible to the RISC-V specs.
19.09.2021 1.6.0.5 added menvcfg[h] CSRs (only available if U ISA extension is enabled; not used yet - hardwired to zero, but required by RISC-V spec.)
18.09.2021 1.6.0.4 ⚠️ ⚠️ major change modified low-level hardware access (memory-mapped registers) PR #158: now using struct-based access concept (IO module = struct, interface registers = members of struct) instead of #define single-pointers (inspired by https://blog.feabhas.com/2019/01/peripheral-register-access-using-c-structs-part-1/), format: NEORV32_<module_name>.<register_name>; renamed all control registers and bits from *CT* to *CTRL*; added sw/lib/include/neorv32_legacy.h compatibility layer (maps deprecated "defines" to according struct registers, provides old control register/bit names, do not use for new designs!)
16.09.2021 1.6.0.3 🐛 fixed another missing IRQ signal connection (NMI) in system_integration wrappers
15.09.2021 1.6.0.2 ⚠️ split processor-internal memory VHDL sources (IMEM and DMEM) into separated files (#151): entity-only (rtl/core/neorv32_*mem.entity.vhd) and default architecture-only (rtl/core/mem/neorv32_*mem.default.vhd); allows easy replacement by optimized platform-specific architectures
13.09.2021 1.6.0.1 🐛 fixed missing IRQ signal assignments (MSW and XIRQ) in AXI4-lite top wrapper
11.09.2021 🚀1.6.0 New release
11.09.2021 1.5.9.9 removed mstatus.SD flag (is always 0 for Zfinx extension as the current state is already defined entirely by the x register file); tied mstatus.fs as it must not affect trapping of Zfinx instructions (according to RISC-V specs.)
09.09.2021 1.5.9.8 added flags to SYSINFO module to determine configuration of FAST_MUL_EN and FAST_SHIFT_EN generics by software
09.09.2021 1.5.9.7 FAST_SHIFT_EN option will now also implement full-parallel computation logic (like barel shifters) for all Zbb shift-related instructions (population count, count leading/trailing zeros, circular shifts)
08.09.2021 1.5.9.6 added support for RISC-V Zbb CPU extension (basic bit-manipulation operations), enabled via new top generic CPU_EXTENSION_RISCV_Zbb; added example software project providing a Zbb "intrinsic" library
08.09.2021 1.5.9.5 🐛 fixed missing flash_sdi_i in Radiant-related example setups and processor wrappers
19.08.2021 1.5.9.4 ⚠️ removed custom mzext CPU CSR, moved all information flags to new SYSINFO_CPU register in the system information memory module (SYSINFO)
19.08.2021 1.5.9.3 ⚠️ removed top's USER_CODE generic
18.08.2021 1.5.9.2 fixed Zifencei test of riscv-arch-test port
16.08.2021 1.5.9.2 minor CPU control logic optimizations
15.08.2021 1.5.9.1 🐛 fixed bug in mret instruction that caused an exception if user mode was not implemented (bug caused by modifications in v1.5.8.8)
14.08.2021 1.5.9.0 Added new designated test setups: rtl/test_setups, 📚 UG: General Hardware Setup
13.08.2021 🚀1.5.9 New release
08.08.2021 1.5.8.9 reworked CPU register file logic: any write access to x0 will be masked to actually write zero - no special treatment by the CPU control unit required anymore; slightly less hardware resources required; first instruction after hardware reset should write x0 (any value; implemented in start-up code crt0.S)
07.08.2021 1.5.8.8 🐛 fixed bug in execution (trapping) of xRET instructions: dret (return from debug-mode handler) has to raise an illegal instruction exception if executed outside of debug-mode, mret (return from machine-mode handler) has to raise an illegal instruction exception if executed in lower-privileged modes (lower than machine-mode)
05.08.2021 1.5.8.7 added mstatus.FS and mstatus.SD CSR bits: control the state of the FPU (Zfinx) extension; supported states for mstatus.FS: 00 = off, 11 = dirty; writing other states will always set dirty state; note that all FPU instructions including FPU CSR access instructions will raise an illegal instruction exception if mstatus.FS = off
03.08.2021 1.5.8.6 🐛 fixed bug in linker script #134: .rodata.* "sub"-sections were missing, caused wrong linking of implicit constants (like strings); added mconfigptr CSR (RISC-V priv. ISA spec. v1.12-draft ;read-only): holds a pointer to a platform/system configuration structure - not actually used yet
30.07.2021 1.5.8.5 fixed minor bug in top entity / AXI4 wrapper (Vivado "issue": generic defaults need a fixed-size initialization value) #113
26.07.2021 1.5.8.4 🐛 fixed major bug in CPU interrupt system: interrupts during memory accesses (load/store instruction) terminated those memory accesses violating the crucial "instruction atomicity" concept: traps (interrupts and exceptions) must only intervene between instructions
25.07.2021 1.5.8.3 added mstauts.TW CSR flag (when set executing wfi instruction outside of machine-mode will raise an illegal instruction exception); flag is hardwired to zero if user mode is not implemented
25.07.2021 1.5.8.2 🐛 fixed bug in E ISA extension: extension could not be enabled due to missing generic propagation; clean-up of generic defaults: only the processor top entity provides defaults for the configuration generics
24.07.2021 1.5.8.1 machine-level interrupts (top entity signals; "external" mext_irq_i, "software" msw_irq_i, "mtime" mtime_irq_i and "non-maskable" nm_irq_i) now trigger on rising edges; exposed advanced external bus interface configuration options as new top entity generics (moved from package constants): MEM_EXT_PIPE_MODE, MEM_EXT_BIG_ENDIAN, MEM_EXT_ASYNC_RX
22.07.2021 🚀1.5.8 New release
22.07.2021 1.5.7.16 (re-)added mstatush CSR (all bits are hardwired to zero: writes are ignored, reads will always return zero) - CSR address is assigned to comply with RISC-V priv. arch. spec. 1.12
21.07.2021 1.5.7.15 🐛 fixed minor bug in SLINK module (signals were missing in sensitivity lists); ⚠️ simplified NEOLED interrupt system (now triggered if TX FIFO fill level falls below half-full), added option to send LED strobe command ("RESET"), added FIFO status signals to status register, simplified FIFO access logic, added new top generic IO_NEOLED_TX_FIFO to configure NEOLED FIFO depth
18.07.2021 1.5.7.14 exposed new generic CPU_IPB_ENTRIES to configure size of CPU instruction prefetch buffer
18.07.2021 1.5.7.13 clean-up of processor top entity: using more sophisticated default values for all input signals and generics (all generics are "off" by default; input signals use L for control lines and U for data lines by default)
14.07.2021 1.5.7.12 reworked SLINK interrupt concept (now using FIFO fill level "half-full" as interrupt condition, see #122); added fill level output to processor FIFO component
09.07.2021 1.5.7.11 🐛 fixed minor bug in FIFO component (mapping might fail if FIFO_DEPTH = 1); fixed broken sw/example/demo_freeRTOS makefile (all freeRTOS includes were missing)
03.07.2021 1.5.7.10 added new component: External Interrupt Controller (XIRQ): up to 32 external interrupt channels xirq_i (via XIRQ_NUM_CH generic), configurable trigger (via XIRQ_TRIGGER_TYPE and XIRQ_TRIGGER_POLARITY generics), prioritized or non-prioritized servicing
02.07.2021 1.5.7.9 relocated base addresses of watchdog timer (WDT) and true-random number generator (TRNG); removed CPU's firq_ack_o signal (was not used at all)
30.06.2021 1.5.7.8 ⚠️ increased GPIO port size from 32-bit to 64-bit; relocated GPIO base address; removed GPIO.input pin-change interrupt
29.06.2021 1.5.7.7 added new processor module stream link interface (SLINK): up to 8 individual RX and TX stream links, compatible to AXI4-Stream base protocol; added software driver files; added documentation
27.06.2021 1.5.7.6 🐛 fixed bug in CFS (custom functions subsystem) address map layout
27.06.2021 1.5.7.5 ⚠️ removed numerically-controlled oscillator (NCO, neorv32_nco.vhd) module as it appears to be an over-engineered clock-generator without many use cases (if you really need this module, you can wrap it within the custom functions subsystem CFS)
27.06.2021 1.5.7.4 ⚠️ removed top's fast IRQ (FIRQ) inputs soc_firq_i: the FIRQs are reserved for processor-internal usage only, use the mext_irq_i RISC-V external interrupt signal for all external interrupt applications (via dedicated interrupt controller), a follow-up version of the project will introduce a customizable external interrupt controller; sourced-out FIFOs into new HDL component neorv32_fifo.vhd
26.06.2021 1.5.7.3 edit of v1.5.7.2: RISC-V spec claims to leave destination registers of trapping load operation unchanged (do not set to zero); minor CPU control logic optimizations; reworked bootloader to provide several new configuration and customization options
25.06.2021 1.5.7.2 optimized instruction execution FSM: less hardware utilization, 🔒 now ensures to write ZERO to destination register if there is an exception during a load operation; made default bootloader even more HW configuration independent (GPIO, SPI and MTIME are optional; UART is optional but highly recommended);
24.06.2021 1.5.7.1 added RISC-V Zmmul ISA extension (via CPU_EXTENSION_RISCV_Zmmul generic; default = false): implements only the integer multiplication instructions sub-set of the M extension; for size-constrained setups, requires ~50% less hardware resources than the M extension
23.06.2021 🚀1.5.7 New release one year NEORV32! 🎉
21.06.2021 1.5.6.14 🐛 fixed bug in debugger "park loop": fence.i instruction was missing before executing the DM's program buffer - this caused execution of outdated instructions from the program buffer if the instruction cache is implemented
21.06.2021 1.5.6.13 removed TINY_SHIFT_EN generic; clean-up of CPU co-processor system: removed "dummy co-processor" for CSR read access, moved CPU shifter core into new co-processor; simplified default (bit-serial) shifter logic (single bit-shifts only) and multi-cycl instructions decode logic
18.06.2021 1.5.6.12 clean-up of CPU co-processor system (removed unused co-processor slots 4,5,6,7)
15.06.2021 1.5.6.11 made bootloader more configuration-independent: bootloader now only uses the first 512 bytes of internal/external DMEM for runtime data - hence, the DMEM size is not further relevant as long as it greater than or equal to 512 bytes
14.06.2021 1.5.6.10 physical size of bootloader ROM (BOOTROM) is automatically determined during synthesis based on the size of the initialization image, max physical size is 32kB; simplified BOOTROM access check logic; added size check when using IMEM as ROM (check if application image fits); simplified linker script: logical instruction address space 2GB now, no need to adapt this to hardware configuration, hardware checks if application fits into physical memory size (which configured via generics)
13.06.2021 1.5.6.9 ⚠️ reworked boot configuration: removed MEM_INT_IMEM_ROM and BOOTLOADER_EN generics, replaced by single INT_BOOTLOADER_EN generic (type boolean): true = implement processor-internal (default) bootloader, implement processor-internal IMEM (if implemented) as RAM; false = boot from processor-internal IMEM implemented (if enabled) as pre-intialized ROM; reworked IMEM, DMEM and BOOTROM memory architecture; reworked image generator and generated application image files (now using unconstrained array as init images + unified array/memory types)
12.06.2021 1.5.6.8 🐛 fixed bug in instruction cache (cache controller might have missed resync/"clear-and-reload" requests from fence.i instructions); minor project/repo clean-ups
08.06.2021 1.5.6.7 clean-up of Wishbone interface module (dead code removal); added new package constant wb_rx_buffer_c to configure SYNC (default) or ASYNC Wishbone RX path (allows trade-off between performance/latency and timing closure)
06.06.2021 1.5.6.6 🐛 fixed bug in PWM base address configuration; ⚠️ removed user-access HPM counter access via hpmcounter3[h]:hpmcounter3[h] CSRs, hardwired according mcounteren bits to zero: HPM can only be used in machine mode; reworded 64-bit counters (cycle, instret, hpmcounter + mtime) overflow logic: now using dedicated CARRY chain instead of overflow detector (can improve timing);
05.06.2021 1.5.6.5 removed debug mode's stepie flag (used to allow interrupts during single-stepping) as the debugger can emulate interrupts
04.06.2021 1.5.6.4 ⚠️ removed IO_PWM_EN generic, replaced by IO_PWM_NUM_CH generic - PWM controller now supports implementation of up to 60 channels via IO_PWM_NUM_CH (IO_PWM_NUM_CH = 0 will omit the PWM controller); 🐛 fixed minor bug in minstreth counter logic
04.06.2021 1.5.6.3 ⚠️ increased processor-internal IO size from 256 bytes to 512 bytes; relocated base address of CFS
03.06.2021 1.5.6.2 ⚠️ The B ISA extension (bit manipulation) has been (temporarily) removed from the project. See B ISA Extension project board.
03.06.2021 1.5.6.1 CPU/HPM counter size configuration (CPU_CNT_WIDTH and HPM_CNT_WIDTH generics) can now be 0-bit (no counters implemented at all) to 64-bit (full-scale / RISC-V standard) wide
01.06.2021 🚀1.5.6.0 New release
01.06.2021 1.5.5.13 ⚠️ fixed project's endianness inconsistency (issue #50) - CPU and processor are little-endian; changed image generator (sw/image_gen) and bootloader to generate/use little-endian executables; external memory interface is little-endian by default; removed mstatus.ube bit (reads as zero now); removed mstatush CSR
31.05.2021 1.5.5.12 mret instruction now clears mstatus.mpp (according to new RISC-V privileged specs.)
31.05.2021 1.5.5.11 ⚠️ mtval CSR is now read-only; a write access will raise an illegal instruction exception
30.05.2021 1.5.5.10 🐛 fixed bug in processor's reset system (system reset stuck at 0 if on-chip debugger not implemented); reworked processor's reset generator system; VHDL code clean-up; reworked SoC's bus infrastructure (now using array of records for module bus response)
28.05.2021 1.5.5.9 integrated DBMEM (debug memory) component into DM (debug module); removing now-obsolete neorv32_debug_dbmem.vhd component
22.05.2021 1.5.5.8 on-chip debugger (OCD): added debug module (DM) component; OCD is operational now (but still experimental)
22.05.2021 1.5.5.7 🐛 fixed bug in internal memory monitoring: if accessing an unused address which is not re-directed to the external bus interface (because WISHBONE module is disabled) caused the CPU to stall since that bus access was not correctly monitored and aborted by the BUS_KEEPER
21.05.2021 1.5.5.6 on-chip debugger: added debug transport module (DTM) component
20.05.2021 1.5.5.5 added system time output mtime_o (64-bit) driven by processor-internal MTIME unit (idea #29)
20.05.2021 1.5.5.4 on-chip debugger: added debug memory (DBMEM) component
20.05.2021 1.5.5.3 added flag (SYSINFO.FEATURES) to allow software to discover if on-chip debugger is implemented (SYSINFO_FEATURES_OCD); added documentation https://stnolting.github.io/neorv32/#_on_chip_debugger_ocd
19.05.2021 1.5.5.2 added RISC-V CPU Debug Mode, compatible to RISC-V debug spec; new CSRs: dcsr, dpc, dscratch; new instructions: dret; ⚠️ debug mode is still work-in-progress and not operational yet! updated documentation CI #26, contributed by umarcor 👍; fence.i will not longer trap if executed but not implemented (CPU_EXTENSION_RISCV_Zifencei = false)
13.05.2021 1.5.5.1 added UPduino_v3 example setup; renamed signal in watchdog module (rtl/core/neorv32_wdt.vhd) - collision with reserved keyword in vhdl-2008 (fixing issue #24)
10.05.2021 🚀1.5.5.0 New release
10.05.2021 1.5.4.12 ⚠️ mip CSR is now read-only (pending IRQs can be cleared by disabling (and re-enabling) the according mie bit), writing to mip will raise an illegal instruction exception; added non-maskable interrupt (NMI), top entity port nm_irq_i; added new NMI to NEORV32 runtime environment
09.05.2021 1.5.4.11 added new flags to mzext CSR: CSR_MZEXT_PMP (set if at least 1 PMP region is implemented at all), CSR_MZEXT_HPM (set if at least 1 HPM counter is implemented)
03.05.2021 1.5.4.10 minor code clean-ups; moved FIRQ synchronization registers to top, removed sync FFs for processor-internal sources;
30.04.2021 1.5.4.9 moved definitions of IO area from crt0.S to linker script; reworked CPU's CSR access system - highly reducing area overhead (removing decoding logic of not implemented CSRs by heavily using VHDL's NULL statement in case constructs)
29.04.2021 1.5.4.8 minor edits in CPU instruction fetch engine; reduced processor-internal bus timeout (max_proc_int_response_time_c) to 15 cycles; added flag to SYSINGO module (SYSINFO_FEATURES_HW_RESET) to check if a dedicated hardware reset of all core register is implemented (via package's dedicated_reset_c constant)
28.04.2021 1.5.4.7 🐛 fixed bug in instruction cache (iCACHE) when using two sets - ICACHE_ASSOCIATIVITY = 2: cache was corrupting the non-active set
26.04.2021 1.5.4.6 optimized CPU's instruction fetch unit: less overhead for branches, reduced unit's hardware complexity
25.04.2021 1.5.4.5 ⚠️ removed cancel signals from processor-internal bus system; removed CPU's internal bus access timeout counter; added new top generic: MEM_EXT_TIMEOUT - type natural, default = 255; used to configure optional auto-timeout of Wishbone interface (if an external device is not responding within MEM_EXT_TIMEOUT clock cycles); set to zero to disable auto-timeout (required to comply with AXI4-Lite specs. when using the top's AXI wrapper)
25.04.2021 1.5.4.3 converted NEORV32.pdf data sheet to asciidoc using asciidoctor; added data sheet sources to docs/src_adoc
21.04.2021 1.5.4.3 ⚠️ 🐛 reworked atomic memory access system due to conceptual design errors: new system will make atomic LR/SC combinations fail when there is a trap (like a context switch) between the two instructions; new system prohibits SC from writing to memory if exclusive access fails; removed top's wb_tag_i signal, pruned one bit of top's wb_tag_o signal (atomic access), added top's wb_lock_o signal; updated sections in NEORV32.pdf regarding atomic memory accesses
19.04.2021 1.5.4.1 added register stage to MTIME.time write access to improve timing closure
17.04.2021 🚀1.5.4.0 New release
16.04.2021 1.5.3.13 ⚠️ added new top configuration generic TINY_SHIFT_EN (type = boolean, default = false) to configure a tiny single-bit (iterative) shifter for CPU ALU shift operations (for highly area-constrained setups)
16.04.2021 1.5.3.12 reworked reset system of the complete CPU: by default most registers (= "uncritical registers") do not provide an initialization via hardware reset; a defined reset value can be enabled by setting a constant from the main VHDL package (rtl/core/neorv32_package.vhd): constant dedicated_reset_c : boolean := false; (set true to enable CPU-wide dedicated register reset); see new section "2.11. CPU Hardware Reset" of NEORV32.pdf for more information
14.04.2021 1.5.3.11 minor rtl edits to allow synthesis using ghdl-yosys-plugin (🚧 work in progress 🚧)
13.04.2021 1.5.3.10 🐛 fixed bug when configuring HPM_CNT_WIDTH less than 32; ⚠️ added new generic CPU_CNT_WIDTH to configure total size of CPU's cycle and instret CSRs (default = 64-bit); added Zxnocnt (no counters) and Zxscnt (small counters) flags to mzexr CSR to check if CPU_CNT_WIDTH is zero or less than 64, respectively; 🐛 fixed bug in crt0.S start-up code: stack pointer has to be initialized before an exception can occur; updated cpu_test example program
11.04.2021 1.5.3.9 ⚠️ reworked CPU reset system (in addition to modifications in v1.5.3.7): default reset: most register are "initialized" with '-' (don't care) since no real reset is required; however, a "real" reset can be configured using the packages 'def_rst_val_c' constant that defines the reset value for all "uncritical regsiter" (see new NEORV32.pdf section 2.11 "CPU Hardware Reset")
09.04.2021 1.5.3.8 optimized CPU control: register write back during multi-cycle ALU operation only when result is really available (reducing switching activity; avoids possible source operand corruption); optimized M extension's co-processor: multiplications and divisions are 2 cycles faster
08.04.2021 1.5.3.7 🐛 fixed bug in HPM event configuration via mhpmevent* CSRs - there was a CSR address decoding overlap between the HPM event CSRs and the machine trap setup CSRs (introduced in version 1.5.3.6); ⚠️ reworked CPU core CSRs: most CSRs are not reset by hardware and need explicit initialization (done by crt0.S start-up code)
02.04.2021 1.5.3.6 🐛 fixed bug in external memory interface (neorv32_wishbone.vhd) that caused bus exceptions when using external memories with very high access latencies (race condition in bus timeouts); VHDL code clean-up
30.03.2021 1.5.3.5 added new top's generic HPM_CNT_WIDTH (type natural, default=40) to configure the total bit width of the hardware performance monitors (HPM) counter (min 1, max 64); mofified crt0.S: stops all counters (incl. HPMs), no user-level access to ANY counter; neorv32.h: added missing mcounteren and mcountinhibit CSR bit definitions
28.03.2021 1.5.3.4 default "test setup" rtl/top_templetes/neorv32_test_setup.vhd: disabled PMP, implementing 4 HPM counters; added boards folder for exemplary FPGA setups
27.03.2021 1.5.3.3 minor optimization in CPU control engine; FPU comparator now uses comparators results from main ALU (reduces FPU hardware footprint)
26.03.2021 1.5.3.2 added single-precision floating-point unit (FPU) rtl/core/neorv32_cpu_cp_fpu.vhd implementing the Zfinx CPU extension; added/updated Zfinx intrinsic library and verification framework: sw/example/floating_point_test; added co-processor timeout counter to CPU to auto-terminate co-processor operations (for debugging only; defaullt=deactivated)
25.03.2021 1.5.3.1 🐛 fixed bug in invalid floating-point instruction detection (caused CPU to stall if executing an invalid floating-point operation); intrinsic core library (mainly used for not-yet-supported CPU extensions like B and Zfinx): clean-up, added R3 instruction type
24.03.2021 🚀1.5.3.0 New release
23.03.2021 1.5.2.9 added new top generic to enable single-precision floating-point extensions Zfinx: CPU_EXTENSION_RISCV_Zfinx - type boolean, default = false, ⚠️ extension is not yet operational!; bootloader now shows available Z* extensions (from mzext CSR) like Zifencei
21.03.2021 1.5.2.8 🐛 fixed problem with linking math.h library in makefile; added floating-point-related global definitions to main VHDL package; added intrinsic core library file sw/lib/include/neorv32_intrinsics.h - intrinsic library support for CPU extensions, which are not yet supported by the upstream GCC, are based on this
18.03.2021 1.5.2.7 🐛 fixed bug in sw/common/crt0.S dummy exception handler (wrong order of register push/pop); changed upcoming floating-point extension (originally F extension) to Zfinx extension (-> RISC-V Zfinx spec) - updated CPU infrastructure
16.03.2021 1.5.2.6 reworked atomic/exclusive memory access interface: removed CPU's d_bus_lock_o and i_bus_lock_o signal (was always zero anyway); removed top's wb_lock_o signal; added exclusive access request to Wishbone tag signal wb_tag_o (is now one bit wider); added more details to NEORV32.pdf regarding excluisve/atomic memory accesses (interface/protocol)
09.03.2021 1.5.2.5 added bit-manipulation Zba sub-extension (shifted-adds: SH1ADD SH2ADD SH3ADD)
07.03.2021 1.5.2.4 added new IO/peripheral module: Smart LED Interface (NEOLED) to interface intelligent LEDs (WS2812/WS2811/NeoPixel(c) compatible; supports RGB and RGBW LEDs in parallel) with internal TX buffer; new top generics: IO_NEOLED_EN: implement NEOLED interface when true; new top signals: neoled_o: single-wire async. serial data interface; FIFO re-fill interrupt via fast interrupt request channel 9 FIRQ9; added new "NEOLED" section to data sheet; added SW driver library and simple NEOLED example program (sw/example/demo_neopixel)
06.03.2021 1.5.2.3 clean-up of CPU control code: fixed minor bug in F-exension's instruction decoding; changed coding style for CSR write access (old version might have caused "inferring latch..." warning in Intel Quartus); fixed default values for CSRs when according extensions are disabled
04.03.2021 1.5.2.2 added two new generics to configure CFS IO conduit sizes (implementing issue #13): IO_CFS_IN_SIZE - type: positive, configures the size of cfs_in_i signal; IO_CFS_OUT_SIZE - type: positive, configures the size of cfs_out_o signal; minor edits to floating-point CPU infrastructure
03.03.2021 1.5.2.1 added CPU core infrastructure for upcoming single-precision floating-point extension F; ⚠️ floating-point extension is NOT OPERATIONAL YET! added new rtl file for the floating-point unit rtl/core/neorv32_cpu_cp_fpu.vhd (blank template!)
01.03.2021 🚀1.5.2.0 New release
27.02.2021 1.5.1.11 🐛 fixed several small bugs in bitmanipulation extension instruction decoding (not all B instructions triggered and illegal instruction exception when B-extension = disabled)
25.02.2021 1.5.1.10 🐛 fixed bugs in UART RTS/CTS hardware control flow - the new setup was verified on real hardware; added double-buffering to UART RX engine
24.02.2021 1.5.1.9 mcounteren CSR is hardwired to zero if user mode is not implemented (CPU_EXTENSION_RISCV_U = false); added Zbs (single-bit operations) sub-extension to bit-manipulation unit
22.02.2021 1.5.1.8 added programmable RTS/CTS hardware flow control to UARTs; new top signals: uart0_rts_o, uart0_cts_i, uart1_rts_o, uart1_cts_i; UART.TX engine will only start sending (if CTS flow control is activated) if uart*_cts_i is asserted (low-active); UART.RX engine signals (if RTS flow control is activated) via uart*_rts_o if it is ready to receive new data (low-active); added hw flow control parameter to uart setup functions neorv32_uart*_setup()
20.02.2021 1.5.1.7 removed err_o signal from custom functions subsystem CFS; processor SoC fast interrupt input soc_firq_i reduced to 6 channels (was 8) - mapped to CPU's FIRQ_10 - FIRQ_15; added individual fast IRQs for UART1 "RX complete" and "TX complete" conditions (-> FIRQ_4 & FIRQ_5); changed FIRQ channels of TWI/SPI/GPIO interrupts
18.02.2021 1.5.1.6 added register buffer for enable signals to processor-internal clock generator; 🐛 fixed bug in sw/example/demo_twi program: TWI clock speed message was wrong (factor 1/4 was missing)
17.02.2021 1.5.1.5 added a second independent UART: new UART is secondary UART UART0, the "old" UART is now the primary UART UART0; by default the primary UART (UART0) is used for all user interface connection; reworked fast interrupt FIRQ assignment/priority list - added UART1 RTX (receive or send done) fast interrupt; added hardware driver functions for new UART1 - the "old" neorv32_uart_* function calls will map to the primary UART UART0 for compatibility; renamed compiler flag to enable UART "simulation mode": UART_SIM_MODE -> UART0_SIM_MODE for primary UART, UART1_SIM_MODE for secondary UART (UART_SIM_MODE is still supported for compatibility and maps to UART0_SIM_MODE); added second simulation UART receiver for UART1 to testbench; renamed UART simulation output files: neorv32.testbench_uart.out -> neorv32.testbench_uart0.out (testbench UART0 receiver), new: neorv32.testbench_uart1.out (testbench UART1 receiver), neorv32.uart.sim_mode.text.out and neorv32.uart.sim_mode.data.out -> neorv32.uart0.sim_mode.text.out and neorv32.uart0.sim_mode.data.out (for UART0), new neorv32.uart1.sim_mode.text.out and neorv32.uart1.sim_mode.data.out (for UART1)
13.02.2021 1.5.1.4 HW_THREAD_ID generic is now of type natural; mret instruction now requires an additional cycle to execute; logic optimization of CPU's control logic -> smaller hardware footprint and higher f_max; updated CPU synthesis results; removed top module's generic initialization using (others => '0') (targeting issue #8)
09.02.2021 1.5.1.3 modified CPU architecture: now using a "pseudo" ALU co-processor to get the result of a CSR read operation into data path, removing one input from register file input mux -> shorter critical path
08.02.2021 1.5.1.2 added new peripheral/IO module: Numerically-Controlled Oscillator NCO: three independent channels, 20-bit phase accu, 20-bit tuning word, fixed 50% duty cycle mode or pulsed mode; added according HW drivers and example program
07.02.2021 🚀1.5.1.0 New release
05.02.2021 1.5.0.11 🐛 fixed error in atomic instruction LR.W
05.02.2021 1.5.0.10 CPU now provides 16 fast interrupt request lines (FIRQ0 .. FIRQ15) with according mie/mip CSR bits and mcause trap codes; removed IRQ enable flags from SPI, UART & TWI; reworked processor-internal interrupt system - assignment/priority list; UART now features individual IRQs for "RX-done" and "TX-done" conditions; changed bit order in TWI control register
29.01.2021 1.5.0.9 removed custom function units CFU0 & CFU1; replaced them by new Custom Functions Subsystem CFS, which provides up to 32x32-bit memory-mapped registers; new configuration generics: IO_CFS_EN, IO_CFS_CONFIG; new top entity signals: cfs_in_i, cfs_out_o; increased processor's IO area from 128 bytes to 256 bytes, now starting at 0xFFFFFF00
28.01.2021 1.5.0.8 added critical limit for number of implemented PMP regions: When implementing more PMP regions that a certain critical limit an additional register stage is automatically inserted into the CPUs memory interfaces increasing the latency of instruction fetches and data access by +1 cycle. The critical limit can be adapted for custom use by a constant from the main VHDL package file (rtl/core/neorv32_package.vhd). The default value is 8: constant pmp_num_regions_critical_c : natural := 8;
27.01.2021 1.5.0.7 added four additional fast interrupt channels FIRQ4..7, available via processor's top soc_firq_i(3:0) signal for custom platform use; fixed minor error in UART setup function (baud rate prescaler calculation for very high baud rates)
26.01.2021 1.5.0.6 minor logic optimization of CPU's B extension co-processor (reducing area); minor logic optimization or HPM triggers (reducing area); reworked CPU's co-processor interface; minor logic optimization of branch condition check (to shorten critical path)
23.01.2021 1.5.0.5 reworked true random number generator TRNG: architecture is now based on several simple ring oscillators with incrementing length; changed control register bits; updated according driver functions and demo program
22.01.2021 1.5.0.4 🐛 fixed BUG in bootloader (that caused it to immediately crash after reset if SPI/MTIME/GPIO peripherals were not implemented); reworked watchdog timer WDT: removed watchdog access password, added option to lock configuration until next system reset, changed control register bits - updated driver functions and demo/test programs
17.01.2021 1.5.0.3 CPU data register file can now be mapped to a single "true dual-port" block RAM by the synthesizer (requiring only 1024 memory bits instead of 2048); 🐛 fixed typo error in sim/rtl_modules/neorv32_imem.vhd; modified M co-processor (due to register file read access modification), reduced switching activity when co-processor is idle; logic/arithmetic operations of B extension only require 3 cycles now, reduced switching activity when co-processor is idle
15.01.2021 1.5.0.2 added instruction cache associativity configuration (number of sets); new configuration generic: ICACHE_ASSOCIATIVITY -> number of sets (1 = direct mapped, 2 = 2-way set-associative), has to be a power of two; if associativity is > 1 the used replacement policy is least recently used (LRU); 🐛 fixed bug in sw/lib/source/neorv32_cpu.c PMP.CFG configuration function
14.01.2021 1.5.0.1 added new HPM trigger event: multi-cycle ALU operation wait cycle (HPMCNT_EVENT_WAIT_MC); renamed neorv32_cache.vhd -> neorv32_icache.vhd
10.01.2021 🚀1.5.0.0 Renamed configuration generics: *_USE -> *_EN
10.01.2021 1.4.9.10 Added support for bit manipulation extension (B) - base subset Zbb only (⚠️ RISC-V B (sub-)extensions are not officially ratified yet; compatible to version "0.94-draft"); enabled via new configuration constant CPU_EXTENSION_RISCV_B (default = false); uported Zbb instructions: CLZ CTZ CPOP SEXT.B SEXT.H MIN[U] MAX[U] ANDN ORN XNOR ROL ROR RORI zext(pseudo-instruction for PACK rd, rs, zero) rev8(pseudo-instruction for GREVI rd, rs, -8) orc.b(pseudo-instruction for GORCI rd, rs, 7); added B flag to misa CSR; added Zbb flag to mzext CSR
03.01.2021 1.4.9.8 Added HPM trigger for instruction issue wait cycle (caused by pipeline flush); all HPM counters do not increment if CPU is sleep mode; fixed CoreMark timer overflow issues; rtl/core/neorv32_busswitch.vhd: removed wait states, less load/store wait cycles -> faster execution; updated CoreMark results
02.01.2021 1.4.9.7 added RISC-V hardware performance monitors (HPM); new CSRs: mhpmevent*(3..31), [m]hpmcounter*[h](3..31), amount configurable via top's generic HPM_NUM_CNTS; supported counter events: active cycle, retired instruction, retired compressed instruction, instruction fetch memory wait cycle, load operation, store operation, load/store memory wait cycle, unconditional jump, conditional branche (all), conditional taken branch, entered trap, illegal instruction exception; PMP can now have up to 64 regions; number of regions configured via top's PMP_NUM_REGIONS generic; removed obsolete top's PMP_USE generic; removed PMP flag from mzext CSR; minimal region granularity (in bytes) configured via top's PMP_MIN_GRANULARITY generic, has to be a power of two and >= 8 bytes; 🐛 fixed bug in sleep (wfi) instruction
29.12.2020 1.4.9.5 New UART features: "frame check" (test if stop bit is set), error indicated via UART_DATA reg's UART_DATA_FERR flag; configurable parity bit (UART_CT.UART_CT_PMODE1:UART_CT_PMODE0, 00=no parity; 10=even parity; 11=odd parity); parity error indicated via UART_DATA reg's UART_DATA_PERR flag; moved UART's RX overrun flag to UART_DATA.UART_DATA_OVERR
26.12.2020 1.4.9.4 removed zicnt_en option (was used to discard the standard RISC-V counters and timers from implementation); added missing mcounteren CSR (to allow read-access from user-level code to cycle[h] / time[h] / [m]instret[h] CSRs); available bits: 0: CY, 1: TM, 2: IR; added missing mcountinhibit CSR (to disable auto-increment of [m]cycle[h] / [m]instret[h] CSRs); available bits: 0: CY, 2: IR; ⚠️ renamed CSR bits C-code-aliases: CPU_* -> CSR_*
25.12.2020 1.4.9.3 Added missing UBE flag to mstatus CSR, indicates Endianness for load/stores in user mode (always set indicating BIG-endian mode), is a copy of mstatush.mbe
23.12.2020 1.4.9.2 added processor-internal instruction cache rtl/core/neorv32_cache.vhd (direct mapped); new configuration generics: ICACHE_USE (implement cache), ICACHE_BLOCK_SIZE (cache block/page/line size), ICACHE_NUM_BLOCKS (number of cache blocks); added SYSINFO_CACHE register to SYSINFO to check cache configuration by software
20.12.2020 1.4.9.1 🐛 fixed bug in CPU's instruction fetch engine (alignment_errros/bus_errors were not acknowledged correctly); added BUS_TIMEOUT generic to CPU (defines the amount of cycles after which an unacknowledged bus access will get terminated and raises a bus access fault exception)
19.12.2020 🚀1.4.9.0 Testbench: added memory-mapped triggers to trigger core's "machine software & external interrupts"; sw/example/cpu_test: removed CFU tests, added MEI and MSI tests; added RISC-V-Compliance Test Framework to repository (riscv-compliance/), core passes all rv32 tests (riscv-compliance v2.1)
18.12.2020 1.4.8.13 Added additional simulation files: simulation-optimized IMEM-ROM (so far, this is only relevant for the new NEORV32 RISC-V Compliance test framework v2.0); Processor now passes all rv32 tests of the new RISC-V Compliance Test Framework v2.0
16.12.2020 1.4.8.12 ⚠️ fixed (another) bug in mtval CSR generation (wrong value for "breakpoint" trap); updated mtval value table in data sheet; fixed bug in load/store operation (introduced in version 1.4.8.10)
16.12.2020 1.4.8.11 ⚠️ fixed bug in mtval CSR generation (wrong values for some traps); fixed bug in mip CSR (writing zero to implemented bits now actually clears pending interrupts); fixed bug in IRQ priority encoding (machine software interrupt MSI comes before machine timer interrupt MTI)
12.12.2020 1.4.8.10 ⚠️ fixed wrong trap_reset_c encoding (in it's expanded form it should be 0x80000000) and reset logic: hardware mcause register is now set to trap_reset_c after a hardware reset; crt0.S start-up code now sets mcause to trap_reset_c after finishing hardware setup
11.12.2020 1.4.8.9 Added option to exclude standard RISC-V performance counters ([m]cycle[h] and [m]instret[h]) for size-constrained implementations; disabled by setting VHDL package's zicnt_en_c constant to false; software can determine state of zicnt_en_c via mzext CSR's CPU_MZEXT_ZICNT bit; added new signal to processor top entity: mtime_i, this signal is used for updateting the time[h] CSRs if the processor-internal MTIME unit is disabled (via IO_MTIME_USE = false)
10.12.2020 1.4.8.8 Added missing mstatush CSR (only bit MBE is implemented yet); added option to configure external bus interface for BIG- or little-endian byte-order, configured via VHDL package xbus_big_endian_c constant, default = BIG-endian, software can check endianness of the interface via SYSINFO's SYSINFO_FEATURES(SYSINFO_FEATURES_MEM_EXT_ENDIAN) flag; added mstatush CSR and endianness information to data sheet
09.12.2020 1.4.8.7 Added missing environment call from U-mode exception (via ecall instruction in user-mode); added environment call from U-mode to data sheet
09.12.2020 1.4.8.6 ⚠️ fixed bugs in ALU's co-processor interface: ATOMIC A extension could not be used without MULDIV M extension, CPU might have permanently stalled when executing an instruction from a disabled ISA extension; 🔒 added security feature: illegal user-level CSR read access will always return zero; added new section Execution Safety to neorv32.pdf data sheet
07.12.2020 1.4.8.5 ⚠️ fixed bug in next-PC logic (introduced with version 1.4.8.1) that caused instruction fetch from memories with more than 1 cycle latency to fail
05.12.2020 1.4.8.4 ⚠️ fixed bug in physical memory protection (PMP): region size configuration was incorrect; removed PMP_NUM_REGIONS and PMP_GRANULARITY CPU/processor generics (PMP configuration now via package constants); reworked section 2.4. Instruction Sets and CPU Extensions of neorv32.pdf
04.12.2020 1.4.8.2 Added PMA (physical memory attribute) to processor-internal IO region: NO EXECUTE; added 3.3.Address Space/Physical Memory Attributes (PMAs) section to neorv32.pdf
03.12.2020 1.4.8.1 Optimized CPU program counter (PC) update logic and "next PC" computation (shortened critical path); updated bootloader (configuration option for direct-boot-from-SPI-flash only) and customization text in neorv32.pdf
01.12.2020 🚀1.4.8.0 ⚠️ fixed bug in CPU-internal co-processor interface; optimized multiplier unit (~1 faster); added CPU A (atomic) extension support (only lr.w and sc.w instructions yet); added lock signal to CPU and processor's external bus interface
28.11.2020 1.4.7.6 Split ALU core operations: shortened critical path - replaced ALU output 8:1 mux by a 4:1 mux
26.11.2020 1.4.7.5 Minor rtl clean-up; CSR access instructions are one cycle faster now (3 cycles now); system/environment instructions (ecall ebreak mret wfi) need one additional cycle (4 cycles now)
25.11.2020 1.4.7.4 ⚠️ fixed bug in FENCE.I instruction that corrupted instruction fetch when executing code from processor-external memory; default testbench (sim/neorv32_tb.vhd) now features external IMEM, external DMEM and external IO connected via external bus interface; simulation now allows CPU to execute code using external memories only (no internal IMEM/DMEM); optimized CPU's instruction fetch interface (no more unnecessary transfer cancel requests)
20.11.2020 1.4.7.2 ⚠️ fixed bug in CPU bus unit that caused a memory exception after reset in some cases; added second simulated external (Wishbone) memory to testbench (one memory for simulating an external IMEM, one memory for simulating external memory-mapped IO); external bus interface (wishbone) now makes sure that a canceled bus transfer is really understood by the accessed peripheral
20.11.2020 1.4.7.1 Removed deprecated "update_enable signal" from IMEM
11.11.2020 🚀1.4.7.0 Further optimized pipeline front-end: Jumps and branches are one cycle faster (+5% coremark performance); updated synthesis results; updated performance results; added hello_world example program
07.11.2020 1.4.6.7 Updated bootloader (size optimization) and changed processor version output; added project logo; minor data sheet edits
03.11.2020 1.4.6.6 Removed SPI module's buggy "LSB-first mode", SPI module now always sends data MSB-first; removed SPI.CTRL SPI_CT_DIR bit; modfied bit order in SPI CTRL register; updated SPI SW library
02.11.2020 1.4.6.5 ⚠️ Fixed bug in CPU's illegal instruction detection logic; CPU rtl code optimizations - further reduced hardware footprint; rtl code clean-ups
01.11.2020 1.4.6.4 ⚠️ Fixed bug in [m]instret[h] and [m]cycle[h] carry logic; CPU hardware optimizations (area reduction, shortened critical path)
29.10.2020 1.4.6.3 rtl code clean-up; made preparations for additional co-processors
25.10.2020 1.4.6.2 Added tag signal (wb_tag_o) to processor's Wishbone bus; removed processor's priv_o - privilege level is now encoded in Wishbone tag signal; added a more sophisticated FreeRTOS example ("full_demo")
24.10.2020 🚀1.4.6.0 Completely reworked external memory interface (WISHBONE), removed now-obsolete processor generic MEM_EXT_REG_STAGES; added processor wrapper with AXI4-Lite interface
22.10.2020 1.4.5.11 TWI: Added new control register flag to enable/disable SCL clock stretching by peripheral devices
22.10.2020 1.4.5.10 Added i_bus_priv_o and d_bus_priv_o signals to CPU_top and priv_o to Processor_top to show privilege level of bus access (from mstatus MPP); ⚠️ Fixed bug in external memory interface [WISHBONE] (non-standard Wishbone components were able to corrupt processor-internal ACK/ERR signal logic)
20.10.2020 1.4.5.9 ⚠️ Fixed bug in CPU "sleep" instruction (WFI - wait for interrupt)
20.10.2020 1.4.5.8 Machine timer interrupt is available as processor input pin (mtime_irq_i) if internal MTIME is not implemented (IO_MTIME_USE = false)
18.10.2020 1.4.5.7 Added new IO peripheral/Device: Second CFU (CFU1); renamed old CFU to CFU0; CFU VHDL files: neorv32_cfu0.vhd & neorv32_cfu1.vhd; removed CFU interrupt
17.10.2020 1.4.5.5 New makefile target upload allows to directly upload an executable to the bootloader from the console
17.10.2020 1.4.5.4 Added new CPU/Processor generic FAST_SHIFT_EN (default = false) to enable implementation of a fast (but large) barrel shifter for accelerating CPU shift instructions; updated CoreMark performance results
16.10.2020 1.4.5.2 Added read-only flag to custom mzext CSR to check if physical memory protection (PMP) is implemented; added [C] mzext CSR name aliases to neorv32.h
15.10.2020 1.4.5.1 Fixed "unprecise exceptions": mtval did not always reflect the correct value according to the instruction that caused the exceptions; fixed bug in RTE: Debug trap handler was not showing the correct mepc value
13.10.2020 🚀1.4.5.0 An official open-source RISC-V architecture ID was assigned to the project: decimal = 19, 32-bit hexadecimal = 0x00000013 - software can retrieve the ID from the marchid CSR
12.10.2020 1.4.4.9 Added alignment flags to makefiles: branch/jump/call targets are forced to be 32-bit aligned -> increases performance when using the C extension; added makefile flag listing to NEORV32.pdf; updated performance results for CPUs with C extension; crt0.S will initialize all registers with zero if not using E extension and not compiling bootloader
11.10.2020 1.4.4.8 Reworked pipeline frontend: Optimized fetch engine, added issue engine, faster instruction fetch after taken branches + reduced hardware requirements; updated synthesis and performance results
11.10.2020 1.4.4.6 Added option to configure external memory interface (Wishbone) to either use standard/classic protocol (default) or pipelined protocol (for better timing): via wb_pipe_mode_c constant in VHDL package file (rtl/core/neorv32_package.vhd); added help text to NEORV32.pdf section "3.4.4. Processor-External Memory Interface (WISHBONE)"
08.10.2020 1.4.4.5 Removed CPU's BUS_TIMEOUT and processor's MEM_EXT_TIMEOUT generics; instead, a global configuration bus_timeout_c in the VHDL package file is used now
08.10.2020 1.4.4.4 Removed DEVNULL device; all simulation output options from this device are now available as SIM_MODE in the UART; mcause CSR can now also be written; FIXED: trying to write a read-only CSR will cause an illegal instruction exception; for compatibility reasons any write access to the misa CSR will be ignored and will NOT cause an exception
07.10.2020 1.4.4.2 Simplified ALU's set of core operations; removed co-processor data mux right after ALU -> shorter critical path; CPU control VHDL code clean-up and CSR write logic optimization; optimized IMEM/DMEM access logic; added note regarding alignment of IMEM/DMEM
05.10.2020 🚀1.4.4.0 ⚠️ Fixed bug in external memory interface: Executing code from external memory was causing an instruction fetch stall
02.10.2020 1.4.3.9 [m]cycleh and [m]instreth CSRs are now 32-bit wide (-> fully RISC-V-compliant)
01.10.2020 1.4.3.8 Added CPU top entity wrapper with resolved port signals rtl/top_templetes/neorv32_cpu_stdlogic.vhd; optimized ALU core functions shorter critical path, less control overhead, reduced HW footprint
27.09.2020 1.4.3.3 Further improved ALU and control logic; CSR access instruction require one additional cycle now (to let side effects kick in); updated synthesis results; added CFU hardware driver dummy
26.09.2020 1.4.3.2 ⚠️ Fixed bug in CSRRWI instruction (introduced with version 1.4.3.1); further ALU operand logic optimizations; updated CPU data path figure
25.09.2020 1.4.3.1 Register file's x0 is now a physical register; this register is initialized by the hardware and locked afterwards; removed "set to zero" stage -> smaller hardware footprint and shorter critical path; added processor top entity wrapper with resolved signals rtl/top_templetes/neorv32_top_stdlogic.vhd
16.09.2020 🚀1.4.3.0 Simplified memory configuration: removed processor top's memory space configuration generics (MEM_ISPACE_BASE, MEM_ISPACE_SIZE, MEM_DSPACE_BASE, MEM_DSPACE_SIZE); data/instruction space sizes are irrelevant for hardware; instruction/data space base addresses are fixed (but can be modified in NEORV32 VHDL package file); modified SYSINFO registers; adapted bootloader, crt0 start-up code and linker script; stack configuration is now done via linker script; reworked chapter "address space"; added CFU interrupt -> fast interrupt channel 1 (shared with GPIO)
14.09.2020 1.4.2.0 Removed option to disable CSR counters (via CSR_COUNTERS_USE generic) since these counters are mandatory according to the RISC-V specs; added new IO/peripheral device: custom functions unit (CFU) for tightly-coupled custom co-processors; improved timing of processor-internal clock generator; fixed wrong labels in address space figure and removed dedicated exception vectors box; added mask register to GPIO unit to specify which input pins can trigger a pin-change interrupt
11.09.2020 1.4.0.4 Reworked TRNG architecture and interface; added text regarding fast interrupt channels usage for the NEORV32 processor
02.09.2020 1.4.0.2 ⚠️ Fixed bugs in external memory interface; added option to define latency of simulated external memory in testbench; hardware configuration sanity checks will now only appear once in console; added more details to data sheet section 3.3. Address Space; fixed typos in MEM_BASE and MEM_SIZE generic names
01.09.2020 1.4.0.1 Using registers above x15 when the E extensions is enabled will now correctly cause an illegal instruction exception
29.08.2020 🚀1.4.0.0 Rearranged and reworked data sheet; added FreeRTOS port, demo & short referencing chapter; removed bootloader-specific linker scripts main linker script is used for both, applications and bootloader; bootloader can now have .data and .bss sections; improved IMEM and BOOTROM memory initialization faster synthesis; image generator now constrains init array size to actual executable size; peripheral/IO devices can only be written in full word mode (= 32-bit); GPIO ports are now 32-bit wide
23.08.2020 1.3.7.3 Added custom mzext CSR to check for available Z* CPU extensions; multiplier's FAST_MUL mode is one cycle faster now; updated performance data
20.08.2020 1.3.7.2 Removed bootloader-specific crt0 bootloader now uses std crt0; makefiles now also support asm and cpp files; made linker scripts more general; renamed makefile "compile" (which is still available for compatibility) target into "exe"
14.08.2020 🚀1.3.7.0 Simplified CPU fetch engine; added configurable CPU instruction prefetch buffer (ipb) FIFO; optimized CPU execute engine; updated performance data
06.08.2020 1.3.6.5 Added FAST_MUL_EN generic to enable mapping of the multiplier core to DSP blocks; ALU.shifter is no more triggered when executing MULDIV operations; added benchmark results for DSP-based multiplier configurations; updated implementation and performance results; simplified makefiles using implicit libc definition; crt0 only initializes lowest 16 registers
03.08.2020 🚀1.3.6.0 Relocated DEVNULL (changed base address); minor edits, optimization and clean-ups
30.07.2020 1.3.5.2 Added register stage to PMP mask generation to shorten critical path; removed automatic IRQ enable/disable from RTE install/uninstall functions
30.07.2020 1.3.5.1 ⚠️ Fixed bug(s) in PMP mask generation; misa.Z flag is not yet defined by the RISC-V specs., hence it is read-only and read as zero
29.07.2020 1.3.5.0 Added user privilege level, enabled via new CPU_EXTENSION_RISCV_U generic; ⚠️ fixed error in mstatus(mpie) logic; implemented RISC-V spec.-compliant Physical Memory Protection (PMP); allows up to 8 regions but only NAPOT mode is supported yet
25.07.2020 1.3.0.0 mcause CSR is read-only now!; removed CLIC, added 4 fast IRQ channels to CPU with according flags in mie and mip and trap IDs; updated core libraries; updated NEORV32 RTE; highly reworked data sheet; updated synthesis and performance results
21.07.2020 1.2.0.6 Added doc section regarding the CPU's data and instruction interfaces; optimized CPU fetch engine; updated iCE40 synthesis results
20.07.2020 1.2.0.5 Less penalty for taken branches and jumps (2 cycles faster)
19.07.2020 1.2.0.0 CPU bus unit now has independent buses for instruction fetch and data access merged into single processor bus via new bus switch unit; doubled speed of ALU shifter unit again; all bits of mcause CSR can now be modified by application program (full RISC-V-compliant); performance counters CSRs [m]cycleh and [m]instreth are only 20-bit wide; removed NEORV32-specific custom CSRs all processor-related information can be obtained from the new SYSINFO IO module (CPU is now more independent from processor configuration); changed IO address of DEVNULL; fixed bug in bootloader's trap handler; added USER_CODE generic to assign a custom user code that can be read by software (from SYSINFO)
14.07.2020 1.1.0.0 Added fence_o and fencei_o signals to top entity to show if a fence or fencei instruction is executed; added mvendorid and marchid CSRs (both are always zero); ALU shift unit is faster now; two lowest bits of mtvec are always zero; fixed wrong instruction exception priority; removed HART_ID generic mhartid CSR is always read as zero; performance counters ([m]cycle[h], [m]instret[h] and time[h]) are also available in embedded mode but can be explicitly disabled via the CSR_COUNTERS_USE generic; mcause CSR only allows write access to bit 31 and bits 3:0; updated synthesis reports
10.07.2020 1.0.6.0 Non-taken branches are now 1 cycle faster; the time[h] CSR now correctly reflects the system time from the MTIME unit; fixed WFI instruction permanently stalling the CPU; [m]cycle[h] counters now stop counting when CPU is in sleep mode; minstret[h] and mcycle[h] now also allow write-access
09.07.2020 1.0.5.0 X flag of misa CSR is zero now; the default SPI flash boot address of the bootloader is now 0x0080000; new exemplary FPGA utilization results for Intel, Lattice and Xilinx; misa CSR is read-only again, switching compressed extension on/off is pretty bad for the fetch engine; mtval and mcause CSRs now allow write accesses and are finally RISC-V-compliant; time low and high registers of MTIME peripheral can now also be written by user; MTIME registers only allow full-word write accesses
06.07.2020 1.0.1.0 Added missing fence instruction; added new generic to enable optional Zifencei CPU extension for instruction stream synchronization
05.07.2020 1.0.0.0 New CPU architecture: Fetch and execute engines; increased CPI; timer and counter CSRs are now all 64-bit wide; ⚠️ fixed CSR access errors; fixed C.LW decompression logic; misa flags C and M are now r/w compressed mode and multiplier/divider support can be switched on/off during runtime; PC(0) is now always zero; ⚠️ fixed bug in multiplier/divider co-processor; renamed SPI signals; added RISC-V compliance check information processor now passes the official RISC-V compliance tests
25.06.2020 0.0.2.5 Added DEVNULL device; added chapter regarding processor simulation; fixed/added links; fixed typos; added FPGA implementation results for iCE40 UP
23.06.2020 🚀0.0.2.3 Publication