PYNQ-Z2_demos/hdmi-out-test/v/display_clocks.v

97 lines
4.5 KiB
Coq
Raw Normal View History

`timescale 1ns / 1ps
`default_nettype none
// Project F: Display Clocks
// (C)2019 Will Green, Open source hardware released under the MIT License
// Learn more at https://projectf.io
// Defaults to 25.2 and 126 MHz for 640x480 at 60 Hz
module display_clocks #(
MULT_MASTER=31.5, // master clock multiplier (2.000-64.000)
DIV_MASTER=5, // master clock divider (1-106)
DIV_5X=5.0, // 5x clock divider (1-128)
DIV_1X=25, // 1x clock divider (1-128)
IN_PERIOD=10.0 // period of i_clk in ns (100 MHz = 10.0 ns)
)
(
input wire i_clk, // input clock
input wire i_rst, // reset (active high)
output wire o_clk_1x, // pixel clock
output wire o_clk_5x, // 5x clock for 10:1 DDR SerDes
output wire o_locked // clock locked? (active high)
);
wire clk_fb; // internal clock feedback
wire clk_1x_pre;
wire clk_5x_pre;
MMCME2_BASE #(
.BANDWIDTH("OPTIMIZED"), // Jitter programming (OPTIMIZED, HIGH, LOW)
.CLKFBOUT_MULT_F(MULT_MASTER), // Multiply value for all CLKOUT (2.000-64.000).
.CLKFBOUT_PHASE(0.0), // Phase offset in degrees of CLKFB (-360.000-360.000).
.CLKIN1_PERIOD(IN_PERIOD), // Input clock period in ns to ps resolution (i.e. 33.333 is 30 MHz).
// CLKOUT0_DIVIDE - CLKOUT6_DIVIDE: Divide amount for each CLKOUT (1-128)
.CLKOUT0_DIVIDE_F(DIV_5X), // Divide amount for CLKOUT0 (1.000-128.000).
.CLKOUT1_DIVIDE(DIV_1X),
.CLKOUT2_DIVIDE(1),
.CLKOUT3_DIVIDE(1),
.CLKOUT4_DIVIDE(1),
.CLKOUT5_DIVIDE(1),
.CLKOUT6_DIVIDE(1),
// CLKOUT0_DUTY_CYCLE - CLKOUT6_DUTY_CYCLE: Duty cycle for each CLKOUT (0.01-0.99).
.CLKOUT0_DUTY_CYCLE(0.5),
.CLKOUT1_DUTY_CYCLE(0.5),
.CLKOUT2_DUTY_CYCLE(0.5),
.CLKOUT3_DUTY_CYCLE(0.5),
.CLKOUT4_DUTY_CYCLE(0.5),
.CLKOUT5_DUTY_CYCLE(0.5),
.CLKOUT6_DUTY_CYCLE(0.5),
// CLKOUT0_PHASE - CLKOUT6_PHASE: Phase offset for each CLKOUT (-360.000-360.000).
.CLKOUT0_PHASE(0.0),
.CLKOUT1_PHASE(0.0),
.CLKOUT2_PHASE(0.0),
.CLKOUT3_PHASE(0.0),
.CLKOUT4_PHASE(0.0),
.CLKOUT5_PHASE(0.0),
.CLKOUT6_PHASE(0.0),
.CLKOUT4_CASCADE("FALSE"), // Cascade CLKOUT4 counter with CLKOUT6 (FALSE, TRUE)
.DIVCLK_DIVIDE(DIV_MASTER), // Master division value (1-106)
.REF_JITTER1(0.010), // Reference input jitter in UI (0.000-0.999).
.STARTUP_WAIT("FALSE") // Delays DONE until MMCM is locked (FALSE, TRUE)
)
MMCME2_BASE_inst (
/* verilator lint_off PINCONNECTEMPTY */
// Clock Outputs: 1-bit (each) output: User configurable clock outputs
.CLKOUT0(clk_5x_pre), // 1-bit output: CLKOUT0
.CLKOUT0B(), // 1-bit output: Inverted CLKOUT0
.CLKOUT1(clk_1x_pre), // 1-bit output: CLKOUT1
.CLKOUT1B(), // 1-bit output: Inverted CLKOUT1
.CLKOUT2(), // 1-bit output: CLKOUT2
.CLKOUT2B(), // 1-bit output: Inverted CLKOUT2
.CLKOUT3(), // 1-bit output: CLKOUT3
.CLKOUT3B(), // 1-bit output: Inverted CLKOUT3
.CLKOUT4(), // 1-bit output: CLKOUT4
.CLKOUT5(), // 1-bit output: CLKOUT5
.CLKOUT6(), // 1-bit output: CLKOUT6
// Feedback Clocks: 1-bit (each) output: Clock feedback ports
.CLKFBOUT(clk_fb), // 1-bit output: Feedback clock
.CLKFBOUTB(), // 1-bit output: Inverted CLKFBOUT
// Status Ports: 1-bit (each) output: MMCM status ports
.LOCKED(o_locked), // 1-bit output: LOCK
// Clock Inputs: 1-bit (each) input: Clock input
.CLKIN1(i_clk), // 1-bit input: Clock
// Control Ports: 1-bit (each) input: MMCM control ports
.PWRDWN(), // 1-bit input: Power-down
/* verilator lint_on PINCONNECTEMPTY */
.RST(i_rst), // 1-bit input: Reset
// Feedback Clocks: 1-bit (each) input: Clock feedback ports
.CLKFBIN(clk_fb) // 1-bit input: Feedback clock
);
// explicitly buffer output clocks
BUFG bufg_clk_pix(.I(clk_1x_pre), .O(o_clk_1x));
BUFG bufg_clk_pix_5x(.I(clk_5x_pre), .O(o_clk_5x));
endmodule